Ive got the perfect solution, but I cant find the notes. its exactly what you need though. I will look
On Wed, Nov 7, 2018 at 10:18 AM Nate Burke <n...@blastcomm.com> wrote: > I'm trying to get a monitor speaker off a mixing board to a different > part of a building. 100+ year old construction, a 20" thick brick wall > between the mixing board and the endpoint, and a cable run of probably > 400-500' involving a lot of fishing of wires. I'm trying to come up with > a way to avoid running wires if I can. Straight line distance between > the 2 points is about 150' WIFI is available at the sound board, and a > hardline cat5 at the remote end, but I need something idiot proof that > just turns on and works. One thought was maybe a SIP Setup (there is > already a SIP Pbx in place), some sort of ATA that would connected to > the monitor out of the board then could be dialed from another SIP > Extension? Not sure if such a beast exists. > > I'd also be open to a simple wireless speaker, but would have to be low > enough frequency to operate at distance through a couple walls, so > Bluetooth is probably out. Audio quality is a secondary concern, it's > more of a "What's happening right now in the other room" need. Any of > you Pro Audio guys have any suggestions? > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
