Unfortunately no cat5 to the soundboard, the aforementioned wall
problem, so I'm limited to WIFI. I should be able to put a phone on the
end of a WIFI Adapter though. Can you somehow wire an Analog Telephone
plug so that it would accept an RCA Jack input? Then I could just use
an ATA. I found this
https://www.amazon.com/JK-Audio-THAT-1-Telephone-Handset/dp/B003D82WHK
but it looks pretty expensive for what I suspect are a few cents worth
of components.
On 11/7/2018 10:31 AM, ch...@wbmfg.com wrote:
If you are not extremely interested in low latency or high quality.
*From:* can...@believewireless.net
*Sent:* Wednesday, November 7, 2018 9:23 AM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT: Wireless Sound System monitor speaker
I would use SIP with auto-answer. Connect a phone to the sound board
and depending on the phone,
either custom wire the handset jack or if it has a 3.5mm jack you
could use that. Set the phone to
auto answer and you could dial in from anywhere.
On Wed, Nov 7, 2018 at 11:18 AM Nate Burke <n...@blastcomm.com> wrote:
I'm trying to get a monitor speaker off a mixing board to a different
part of a building. 100+ year old construction, a 20" thick brick
wall
between the mixing board and the endpoint, and a cable run of
probably
400-500' involving a lot of fishing of wires. I'm trying to come
up with
a way to avoid running wires if I can. Straight line distance between
the 2 points is about 150' WIFI is available at the sound board,
and a
hardline cat5 at the remote end, but I need something idiot proof
that
just turns on and works. One thought was maybe a SIP Setup (there is
already a SIP Pbx in place), some sort of ATA that would connected to
the monitor out of the board then could be dialed from another SIP
Extension? Not sure if such a beast exists.
I'd also be open to a simple wireless speaker, but would have to
be low
enough frequency to operate at distance through a couple walls, so
Bluetooth is probably out. Audio quality is a secondary concern,
it's
more of a "What's happening right now in the other room" need. Any of
you Pro Audio guys have any suggestions?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
