I'm trying to get a monitor speaker off a mixing board to a different
part of a building. 100+ year old construction, a 20" thick brick wall
between the mixing board and the endpoint, and a cable run of probably
400-500' involving a lot of fishing of wires. I'm trying to come up with
a way to avoid running wires if I can. Straight line distance between
the 2 points is about 150' WIFI is available at the sound board, and a
hardline cat5 at the remote end, but I need something idiot proof that
just turns on and works. One thought was maybe a SIP Setup (there is
already a SIP Pbx in place), some sort of ATA that would connected to
the monitor out of the board then could be dialed from another SIP
Extension? Not sure if such a beast exists.
I'd also be open to a simple wireless speaker, but would have to be low
enough frequency to operate at distance through a couple walls, so
Bluetooth is probably out. Audio quality is a secondary concern, it's
more of a "What's happening right now in the other room" need. Any of
you Pro Audio guys have any suggestions?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
