If you are not extremely interested in low latency or high quality.
From: can...@believewireless.net Sent: Wednesday, November 7, 2018 9:23 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT: Wireless Sound System monitor speaker I would use SIP with auto-answer. Connect a phone to the sound board and depending on the phone, either custom wire the handset jack or if it has a 3.5mm jack you could use that. Set the phone to auto answer and you could dial in from anywhere. On Wed, Nov 7, 2018 at 11:18 AM Nate Burke <n...@blastcomm.com> wrote: I'm trying to get a monitor speaker off a mixing board to a different part of a building. 100+ year old construction, a 20" thick brick wall between the mixing board and the endpoint, and a cable run of probably 400-500' involving a lot of fishing of wires. I'm trying to come up with a way to avoid running wires if I can. Straight line distance between the 2 points is about 150' WIFI is available at the sound board, and a hardline cat5 at the remote end, but I need something idiot proof that just turns on and works. One thought was maybe a SIP Setup (there is already a SIP Pbx in place), some sort of ATA that would connected to the monitor out of the board then could be dialed from another SIP Extension? Not sure if such a beast exists. I'd also be open to a simple wireless speaker, but would have to be low enough frequency to operate at distance through a couple walls, so Bluetooth is probably out. Audio quality is a secondary concern, it's more of a "What's happening right now in the other room" need. Any of you Pro Audio guys have any suggestions? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
