I use FLRig to control my IC-7300 and SDRUno to control my SDR with Omnirig optionally syncing the two together. 73, Carey, WB4HXE
On Thu, Jul 14, 2022 at 4:47 PM Rob O'Leary via wsjt-devel < [email protected]> wrote: > Hi Alex, > > I have thought of doing something like this but I expect/hope that we > are not the only people wanting to do sync a panadapter/rx SDR to their > wsjtx band and so there might be a way to do it that I don't have to > invent/code. > > Regards > > Rob > > On 14/07/2022 21:28, Alex Lelievre wrote: > > Hi Rob, > > > > I’ve modified Hamlib so that when I switch frequency on my radio it also > sends a command to my SDR software to go to that frequency via CAT. I’m > sure there are tools out there that do this without the need to modify > existing software but figured I’d put it out there in case that helps you > slightly. > > > > best, > > alex K6LOT > > > > > >> On Jul 14, 2022, at 12:42 PM, Rob O'Leary via wsjt-devel < > [email protected]> wrote: > >> > >> Hi > >> > >> I have searched the email list and the online user guide, so I hope I > havent missed obvious documentation... > >> > >> We use wsjt-x to control an icom746 connected to a 10GHz transverter. > We operate Q65-D for EME. We have fed a 618MHz receive IF to a receive only > SDR to allow us to see a wider slice of spectrum (doppler etc), currently > running spectravu. This IF is further down converted to 144MHz into the > icom746 receive.) > >> > >> I think I could run 2 instances of wsjtx, 1 for the sdr and 1 for the > icom746 but then if we change sked frequency in the eme settings, we would > have to do it twice and soon mess it up! > >> > >> Please could you explain if there is a way to sync the SDR frequency to > the doppler corrected rx freq that is sent to the icom746 and how to set > this up? > >> > >> Thanks > >> > >> Rob > >> > >> > >> > >> _______________________________________________ > >> wsjt-devel mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- Carey Fisher [email protected]
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
