I did the same. Works completely fine. Started WinXP SP3 VM. Installed Visual Studio 2008 Shell (integrated mode) Installed WiX v3.0.5308.0 Launched Visual Studio 2008 IDE from shortcut on Start menu. Clicked the "Create Project" link on the Start Page & I can see the WiX project types. Clicking OK in the Create Project dialog does what you'd expect.
James can you send more one line e-mails to the list every 5 minutes please. Cheers, Palbinder Sandher Software Deployment & IT Administrator T: +44 (0) 141 945 8500 F: +44 (0) 141 945 8501 http://www.iesve.com **Design, Simulate + Innovate with the <Virtual Environment>** Integrated Environmental Solutions Limited. Registered in Scotland No. SC151456 Registered Office - Helix Building, West Of Scotland Science Park, Glasgow G20 0SP Email Disclaimer -----Original Message----- From: ryebank [mailto:ja...@ryebank.co.uk] Sent: 11 May 2009 16:43 To: wix-users@lists.sourceforge.net Subject: Re: [WiX-users] MSI Factory MacDiarmid, James D wrote: > > > I just installed the 3.0.5217 build of Wix 3 as well as all of the > files you mentionmed.. No luck. :( > > Yes - I mentioned that as when you said you could not get it to install I did this: 1. Loaded up my VMWare "Installer Test XP" VM - this is a base Win XP SP3 install 2. Installed the VS 2008 Shell (integrated mode) 3. Opened up VS 2008 - it loaded fine - did a bit of "configuring" itself - I then exited 4. Installed WiX 3.0.5217 - no problems 5. Opened VS 2008 and the WiX templates were there And independently of this I build all my Installers in a separate VM which is configured just like above + a few more useful Installer Tools (Win Installer SDK etc) - it was some ancient WiX 3 build I originally had on this and I have since installed many updates all without problem. So I am not sure why you are having problems with this. I would suggest running the WiX intsaller with verbose logging to see what it is tripping over. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
