I just ordered a GW3000, but it won't ship before March.

michael.k...@gmx.at schrieb am Dienstag, 28. Januar 2025 um 07:10:54 UTC+1:

>
> I have a spare WH40 for 868MHz, but you are not in Europe, are you? Too 
> bad the GW3000 868MHz is sold out currently, I won't get one before end of 
> February, I assume.
> gjr80 schrieb am Montag, 27. Januar 2025 um 21:08:47 UTC+1:
>
>> I have the GW3000 and WS90 so have the haptic sensor covered, and I can 
>> surmise the behaviour with a WH40 only, it is just a case of confirming 
>> what happens when both WS90 (or WS85) and WH40 are present. Thanks for the 
>> offer, but if I don't get any data responses here I will likely just buy a 
>> WH40 and wait for the couple of weeks for delivery.
>>
>> All going well I hope to have the new driver with backfill ready for user 
>> testing sometime in 2nd half of February.
>>
>> Gary
>>
>> On Sunday, 26 January 2025 at 18:06:59 UTC+10 michael.k...@gmx.at wrote:
>>
>>> Hi Gary, all I am missing is the GW3000, since I was waiting for your 
>>> updated driver. How about you? If it's the same situation for you, tell me 
>>> the shipping address, I'll get you one, as a donation for the project, or, 
>>> if you decline, I'll buy one for myself, but it'll take a while until I'll 
>>> arrive.
>>> gjr80 schrieb am Sonntag, 26. Januar 2025 um 04:29:17 UTC+1:
>>>
>>>> Posted in weewx-user to canvass a wider audience.
>>>>
>>>> I'm developing a new Ecowitt driver based on the so called local device 
>>>> HTTP API. This driver will have catchup on startup via either local device 
>>>> history files (for supported devices) or Ecowitt.net (for devices that 
>>>> upload to Ecwoitt.net). Ecowitt's documentation of the local device HTTP 
>>>> API and GW3000 SD card data files is somewhat limited, so I was hoping for 
>>>> some practical help from an Ecowitt GW3000 user (if one exists) who has 
>>>> both tipping (WH40) and haptic (WS85/WS90) rain gauges connected to their 
>>>> GW3000.
>>>>
>>>> What I am after is the header information from the basic sensor CSV 
>>>> file stored on the GW3000 SD card when the GW3000 is connected to both 
>>>> WH40 
>>>> and WS85/WS90 rain gauges. The basic sensor CSV file name format is 
>>>> YYYYMMX.csv where YYYY is the year, MM is the two digit month number 
>>>> and X is an upper case letter. The basic sensor file can be downloaded 
>>>> via the local device web page or directly in your browser via 
>>>> http://device_ip_address:81/YYYYMMX.csv where device_ip_address is the 
>>>> device IP address and YYYYMMX.csv is the file name as described 
>>>> previously. You can view the availble SD card history files via the device 
>>>> web page or at http://device_ip_address/get_sdmmc_info.
>>>>
>>>> The required data does not contain any sensitive info.
>>>>
>>>> thanks,
>>>> Gary
>>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/8d02a3ed-4178-42b4-933f-57f7d096b7cbn%40googlegroups.com.

Reply via email to