Posted in weewx-user to canvass a wider audience.

I'm developing a new Ecowitt driver based on the so called local device 
HTTP API. This driver will have catchup on startup via either local device 
history files (for supported devices) or Ecowitt.net (for devices that 
upload to Ecwoitt.net). Ecowitt's documentation of the local device HTTP 
API and GW3000 SD card data files is somewhat limited, so I was hoping for 
some practical help from an Ecowitt GW3000 user (if one exists) who has 
both tipping (WH40) and haptic (WS85/WS90) rain gauges connected to their 
GW3000.

What I am after is the header information from the basic sensor CSV file 
stored on the GW3000 SD card when the GW3000 is connected to both WH40 and 
WS85/WS90 rain gauges. The basic sensor CSV file name format is YYYYMMX.csv 
where YYYY is the year, MM is the two digit month number and X is an upper 
case letter. The basic sensor file can be downloaded via the local device 
web page or directly in your browser via 
http://device_ip_address:81/YYYYMMX.csv where device_ip_address is the 
device IP address and YYYYMMX.csv is the file name as described previously. 
You can view the availble SD card history files via the device web page or 
at http://device_ip_address/get_sdmmc_info.

The required data does not contain any sensitive info.

thanks,
Gary

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/d9b9dde8-a893-4f74-b61d-88fa98fa8c72n%40googlegroups.com.

Reply via email to