On 11 Feb 2025, at 10:55, gjr80 <gjroder...@gmail.com> wrote:
Thanks for your trouble Ian, I hadn't picked up on the piezo bug. I
set my GW3000 and WS90 up and let it run for a couple days in
December before looking at the csv files. Unfortunately those two
days had no rain so didn't think anything of the lack of rain data.
Just looked back over the last 7 weeks and no rainfall was recorded
in the csv files.
I saw your wxforum post, so I guess we wait. My WH40 is in the mail
so I guess chances are it will be here before any firmware update is
released.
Gary
On Tuesday, 11 February 2025 at 10:47:35 UTC+10
steep...@btinternet.com wrote:
...... It does seem however that it only creates columns for the
traditional rain gauge and not a piezeo rain gauge, even if
priority is set to piezo. I am not sure if this is a bug, an
oversight or deliberate. This happens even when the WH40 is
disabled. A somewhat disappointing outcome.
On Monday, February 10, 2025 at 10:29:25 PM UTC Steeple Ian wrote:
Hi Gary,
I have the two types of rain gauge and the GW3000 arrived today.
Attached is a .zip of the 6 CSV files from my SD Card after
a few hours running.
Regards,
Ian
On Friday, February 7, 2025 at 2:12:04 PM UTC Auchtermuchty
Weather wrote:
I have a GW3000 in the UK, Very happy to help if I can.
On Thursday, 6 February 2025 at 04:50:03 UTC
michael.k...@gmx.at wrote:
My GW3000 is on the way, so it should arrive in a
week or so.
gjr80 schrieb am Freitag, 31. Januar 2025 um
08:59:46 UTC+1:
Yes, 433MHz here. I have a WH40 on the way,
what's another rain gauge...
Gary
On Friday, 31 January 2025 at 03:14:25 UTC+10
michael.k...@gmx.at wrote:
I just ordered a GW3000, but it won't ship
before March.
michael.k...@gmx.at schrieb am Dienstag, 28.
Januar 2025 um 07:10:54 UTC+1:
I have a spare WH40 for 868MHz, but you
are not in Europe, are you? Too bad the
GW3000 868MHz is sold out currently, I
won't get one before end of February, I
assume.
gjr80 schrieb am Montag, 27. Januar 2025
um 21:08:47 UTC+1:
I have the GW3000 and WS90 so have
the haptic sensor covered, and I can
surmise the behaviour with a WH40
only, it is just a case of
confirming what happens when both
WS90 (or WS85) and WH40 are present.
Thanks for the offer, but if I don't
get any data responses here I will
likely just buy a WH40 and wait for
the couple of weeks for delivery.
All going well I hope to have the
new driver with backfill ready for
user testing sometime in 2nd half of
February.
Gary
On Sunday, 26 January 2025 at
18:06:59 UTC+10 michael.k...@gmx.at
wrote:
Hi Gary, all I am missing is the
GW3000, since I was waiting for
your updated driver. How about
you? If it's the same situation
for you, tell me the shipping
address, I'll get you one, as a
donation for the project, or, if
you decline, I'll buy one for
myself, but it'll take a while
until I'll arrive.
gjr80 schrieb am Sonntag, 26.
Januar 2025 um 04:29:17 UTC+1:
Posted in weewx-user to
canvass a wider audience.
I'm developing a new Ecowitt
driver based on the so
called local device HTTP
API. This driver will have
catchup on startup via
either local device history
files (for supported
devices) or Ecowitt.net (for
devices that upload to
Ecwoitt.net). Ecowitt's
documentation of the local
device HTTP API and GW3000
SD card data files is
somewhat limited, so I was
hoping for some practical
help from an Ecowitt GW3000
user (if one exists) who has
both tipping (WH40) and
haptic (WS85/WS90) rain
gauges connected to their
GW3000.
What I am after is the
header information from the
basic sensor CSV file stored
on the GW3000 SD card when
the GW3000 is connected to
both WH40 and WS85/WS90 rain
gauges. The basic sensor CSV
file name format is
YYYYMMX.csv where YYYY is
the year, MM is the two
digit month number and X is
an upper case letter. The
basic sensor file can be
downloaded via the local
device web page or directly
in your browser via
http://device_ip_address:81/YYYYMMX.csv
where device_ip_address is
the device IP address and
YYYYMMX.csv is the file name
as described previously. You
can view the availble SD
card history files via the
device web page or at
http://device_ip_address/get_sdmmc_info.
The required data does not
contain any sensitive info.
thanks,
Gary
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/27c66b98-c8be-4c52-93ec-bc34c60ce637n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/27c66b98-c8be-4c52-93ec-bc34c60ce637n%40googlegroups.com?utm_medium=email&utm_source=footer>.
