| No problem Gary. I see that Gyvate has submitted the request to Ecowitt however I have no sense on how quickly they can respond. Ian Sent from my iPad. On 11 Feb 2025, at 10:55, gjr80 <gjroder...@gmail.com> wrote:
Thanks for your trouble Ian, I hadn't picked up on the piezo bug. I set my GW3000 and WS90 up and let it run for a couple days in December before looking at the csv files. Unfortunately those two days had no rain so didn't think anything of the lack of rain data. Just looked back over the last 7 weeks and no rainfall was recorded in the csv files.
I saw your wxforum post, so I guess we wait. My WH40 is in the mail so I guess chances are it will be here before any firmware update is released.
Gary
On Tuesday, 11 February 2025 at 10:47:35 UTC+10 steep...@btinternet.com wrote:
...... It does seem however that it only creates columns for the traditional rain gauge and not a piezeo rain gauge, even if priority is set to piezo. I am not sure if this is a bug, an oversight or deliberate. This happens even when the WH40 is disabled. A somewhat disappointing outcome.
On Monday, February 10, 2025 at 10:29:25 PM UTC Steeple Ian wrote:
Hi Gary,
I have the two types of rain gauge and the GW3000 arrived today.
Attached is a .zip of the 6 CSV files from my SD Card after a few hours running.
Regards, Ian
On Friday, February 7, 2025 at 2:12:04 PM UTC Auchtermuchty Weather wrote:
I have a GW3000 in the UK, Very happy to help if I can.
My GW3000 is on the way, so it should arrive in a week or so.gjr80 schrieb am Freitag, 31. Januar 2025 um 08:59:46 UTC+1:
Yes, 433MHz here. I have a WH40 on the way, what's another rain gauge...
Gary
I just ordered a GW3000, but it won't ship before March.
I have a spare WH40 for 868MHz, but you are not in Europe, are you? Too bad the GW3000 868MHz is sold out currently, I won't get one before end of February, I assume.gjr80 schrieb am Montag, 27. Januar 2025 um 21:08:47 UTC+1:
I have the GW3000 and WS90 so have the haptic sensor covered, and I can surmise the behaviour with a WH40 only, it is just a case of confirming what happens when both WS90 (or WS85) and WH40 are present. Thanks for the offer, but if I don't get any data responses here I will likely just buy a WH40 and wait for the couple of weeks for delivery.
All going well I hope to have the new driver with backfill ready for user testing sometime in 2nd half of February.
Gary
Hi Gary, all I am missing is the GW3000, since I was waiting for your updated driver. How about you? If it's the same situation for you, tell me the shipping address, I'll get you one, as a donation for the project, or, if you decline, I'll buy one for myself, but it'll take a while until I'll arrive.
gjr80 schrieb am Sonntag, 26. Januar 2025 um 04:29:17 UTC+1:
Posted in weewx-user to canvass a wider audience.
I'm developing a new Ecowitt driver based on the so called local device HTTP API. This driver will have catchup on startup via either local device history files (for supported devices) or Ecowitt.net (for devices that upload to Ecwoitt.net). Ecowitt's documentation of the local device HTTP API and GW3000 SD card data files is somewhat limited, so I was hoping for some practical help from an Ecowitt GW3000 user (if one exists) who has both tipping (WH40) and haptic (WS85/WS90) rain gauges connected to their GW3000.
What I am after is the header information from the basic sensor CSV file stored on the GW3000 SD card when the GW3000 is connected to both WH40 and WS85/WS90 rain gauges. The basic sensor CSV file name format is YYYYMMX.csv where YYYY is the year, MM is the two digit month number and X is an upper case letter. The basic sensor file can be downloaded via the local device web page or directly in your browser via http://device_ip_address:81/YYYYMMX.csv where device_ip_address is the device IP address and YYYYMMX.csv is the file name as described previously. You can view the availble SD card history files via the device web page or at http://device_ip_address/get_sdmmc_info.
The required data does not contain any sensitive info.
thanks,
Gary
--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/weewx-user/27c66b98-c8be-4c52-93ec-bc34c60ce637n%40googlegroups.com.
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/weewx-user/B854BC65-02F5-47D9-BA6A-6BF480C1C89B%40btinternet.com.
|
