I do still see various "soil" and "leaf" values in the REC & LOOP data, but I'm happy now that I've simply removed the unwanted graphs from the "plot_groups" entry in Seasons' skin.conf file. (as seen at http://robcranfill.net/weather/ :-) )
REC: 2022-02-17 11:32:00 PST (1645126320) 'altimeter': '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': 'None', 'dateTime': '1645126320', 'dewpoint': '40.863280558436664', 'ET': '0.0', 'forecastRule': '9', 'heatindex': '44.830000000000005', 'highOutTemp': '46.7', 'humidex': '46.7', 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'inTemp': '56.9', 'interval': '1', 'leafTemp1': '-89.0', 'leafTemp2': '-90.0', 'leafWet1': '1.0', 'leafWet2': '8.0', 'lowOutTemp': '46.7', 'maxSolarRad': 'None', 'outHumidity': '80.0', 'outTemp': '46.7', 'pressure': '30.29821430422651', 'rain': '0.0', 'rainRate': '0.0', 'rxCheckPercent': '98.22916666666667', 'soilMoist1': '4.0', 'soilMoist2': '8.0', 'soilMoist3': '4.0', 'soilMoist4': '32.0', 'soilTemp1': '-89.0', 'soilTemp2': '-90.0', 'soilTemp3': '-89.0', 'soilTemp4': '-90.0', 'txBatteryStatus': 'None', 'usUnits': '1', 'wind_samples': '23.0', 'windchill': '46.7', 'windDir': '157.5', 'windGust': '4.0', 'windGustDir': '135.0', 'windrun': '0.03333333333333333', 'windSpeed': '2.0' LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': '0.8', 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': '0', 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', 'extraAlarm6': '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': '46.7', 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', 'monthET': '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': '30.29821430422651', 'rain': 'None', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': '0', 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': '8.44' LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': '0.8', 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': '0', 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', 'extraAlarm6': '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': '46.7', 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', 'monthET': '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': '30.29821430422651', 'rain': '0.0', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': '0', 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': '8.44' On Wednesday, February 16, 2022 at 4:07:40 PM UTC-8 tke...@gmail.com wrote: > Rob, I'll be curious to hear whether you continue to get bogus database > entries after doing this. > > On Wed, Feb 16, 2022 at 11:50 AM Rob Cranfill <robcr...@gmail.com> wrote: > >> Aha, I see that now in the 'info' output. >> >> After repeated applications of the proper wee_device command, >> >> wee_device --set-transmitter-type=*N*,10 >> >> I now have: >> TRANSMITTERS: >> Channel Receive Repeater Type >> 1 active none iss >> 2 inactive none (N/A) >> 3 inactive none (N/A) >> 4 inactive none (N/A) >> 5 inactive none (N/A) >> 6 inactive none (N/A) >> 7 inactive none (N/A) >> 8 inactive none (N/A) >> >> >> Thanks! >> >> On Tuesday, February 15, 2022 at 11:35:22 AM UTC-8 tke...@gmail.com >> wrote: >> >>> For some reason, every channel in your console is active. You can try >>> shutting them all off except the ISS. Either do it through the console ( >>> see your owners manual), or wee_device can do this. >>> >>> Generally the ISS is on channel 1. >>> >>> On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <robcr...@gmail.com> wrote: >>> >>>> Well that 'splains it! :-) I'll set about removing those (and cleaning >>>> up the DB, right? As detailed elsewhere in this thread?) >>>> >>>> As requested, >>>> >>>> pi@pi3b:/etc/weewx $ wee_device --info >>>> Using configuration file /etc/weewx/weewx.conf >>>> Using Vantage driver version 3.2.3 (weewx.drivers.vantage) >>>> Unable to wake up console... sleeping >>>> Unable to wake up console... retrying >>>> Querying... >>>> Davis Vantage EEPROM settings: >>>> >>>> CONSOLE TYPE: Vantage Vue >>>> >>>> CONSOLE FIRMWARE: >>>> Date: Feb 3 2015 >>>> Version: 4.18 >>>> >>>> CONSOLE SETTINGS: >>>> Archive interval: 60 (seconds) >>>> Altitude: 150 (foot) >>>> Wind cup type: large >>>> Rain bucket type: 0.01 inches >>>> Rain year start: 1 >>>> Onboard time: 2022-02-14 17:34:27 >>>> >>>> CONSOLE DISPLAY UNITS: >>>> Barometer: mbar >>>> Temperature: degree_F >>>> Rain: inch >>>> Wind: mile_per_hour >>>> >>>> CONSOLE STATION INFO: >>>> Latitude (onboard): +47.6 >>>> Longitude (onboard): -122.3 >>>> Use manual or auto DST? AUTO >>>> DST setting: N/A >>>> Use GMT offset or zone code? ZONE_CODE >>>> Time zone code: 4 >>>> GMT offset: N/A >>>> Temperature logging: LAST >>>> Retransmit channel: OFF (0) >>>> >>>> TRANSMITTERS: >>>> Channel Receive Repeater Type >>>> 1 active none iss >>>> 2 active none (N/A) >>>> 3 active none (N/A) >>>> 4 active none (N/A) >>>> 5 active none (N/A) >>>> 6 active none (N/A) >>>> 7 active none (N/A) >>>> 8 active none (N/A) >>>> >>>> RECEPTION STATS: >>>> Total packets received: 24546 >>>> Total packets missed: 143 >>>> Number of resynchronizations: 0 >>>> Longest good stretch: 677 >>>> Number of CRC errors: 16 >>>> >>>> BAROMETER CALIBRATION DATA: >>>> Current barometer reading: 29.980 inHg >>>> Altitude: 150 feet >>>> Dew point: 42 F >>>> Virtual temperature: 48 F >>>> Humidity correction factor: 1.8 >>>> Correction ratio: 1.006 >>>> Correction constant: +0.000 inHg >>>> Gain: 0.000 >>>> Offset: -33.000 >>>> >>>> OFFSETS: >>>> Wind direction: +0 deg >>>> Inside Temperature: +0.0 F >>>> Inside Humidity: +0 % >>>> Outside Temperature: +0.0 F >>>> Outside Humidity: +0 % >>>> >>>> On Monday, February 14, 2022 at 3:28:09 PM UTC-8 tke...@gmail.com >>>> wrote: >>>> >>>>> Rob, >>>>> >>>>> Before this version, weewx only reported on explicit tags. For >>>>> example, if you didn't put $current.soilTemp1 in the template, you were >>>>> not >>>>> going to see it in the report. >>>>> >>>>> Now it basically reports on everything that's in the database. >>>>> >>>>> To stop it, look in the skin.conf file for the Seasons skin. Near the >>>>> top, you will see a stanza labelled [DisplayOptions]. In this stanza are >>>>> lists of the various types. Just remove any type for which you do not >>>>> want >>>>> to be included in the report. >>>>> >>>>> As for where these values are coming from, I have no idea. Either they >>>>> are being emitted by your Vantage Vue, or they are being introduced by >>>>> one >>>>> of your extensions. It's also possible you are picking up sensors from a >>>>> neighbor. >>>>> >>>>> In fact, now that I think about it, it would be worth seeing which >>>>> sensors your Vantage is aware of. Try running >>>>> >>>>> *wee_device --info* >>>>> >>>>> >>>>> -tk >>>>> >>>>> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <robcr...@gmail.com> >>>>> wrote: >>>>> >>>>>> First, I guess I'm just confused as to why I'm getting all this good >>>>>> stuff when my previous (<4.6) installation was happy for so long..... >>>>>> >>>>>> I just did a quick 'grep' looking around, and I do see that the >>>>>> standard Seasons skin *defines* a bunch of these unwanted values. Is >>>>>> that >>>>>> enough to cause them to be reported? >>>>>> >>>>>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote: >>>>>> >>>>>>> You have to have something mapped to a lot of leaf and soil sensors. >>>>>>> We'd need to see all your skin.conf files and your weewx.conf file to >>>>>>> know for sure where they're coming from. If you can't find it, I'd >>>>>>> suggest >>>>>>> you use StdQC to just filter out the extraneous things (link to >>>>>>> User's Guide) >>>>>>> <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>. >>>>>>> >>>>>>> All your bogus temperatures seem to read crazy low numbers. Set >>>>>>> the min/max to a range you'll never see and weewx should ignore them >>>>>>> even >>>>>>> if you can't find a way to turn them off. Perhaps something like the >>>>>>> following (untested): >>>>>>> >>>>>>> [StdQC] >>>>>>> [[MinMax]] >>>>>>> leafTemp1 = 200, 201, deg_F >>>>>>> leafTemp2 = 200, 201, deg_F >>>>>>> soilTemp1 = 200, 201, deg_F >>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>> >>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to weewx-user+...@googlegroups.com. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> -tk >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1b11a3bb-719d-4e4d-9fd3-0280f293c2b5n%40googlegroups.com.
