Rob, it occurs to me that the origins of the REC archive record wasn't clear in the weewxd output that you posted. Could you run the instrumented version of vantage.py again, but this time capture the output through the generation of an archive record? I believe your archive interval is 60 seconds, so a couple minutes of output is more than enough.
On Thu, Feb 17, 2022 at 9:15 PM Rob Cranfill <robcranf...@gmail.com> wrote: > Thanks, I thought I'd fixed that! > > On Thursday, February 17, 2022 at 8:34:24 PM UTC-8 gjr80 wrote: > >> Rob, >> >> Not that I think it has anything to do with the issue at hand but I >> suspect you have the incorrect sign on your station longitude, unless of >> course your station is actually in Zalantun, Mongolia. :) >> >> Gary >> >> On Friday, 18 February 2022 at 13:28:55 UTC+10 robcr...@gmail.com wrote: >> >>> No, thank *you*! :-) >>> >>> >>> On Thursday, February 17, 2022 at 6:44:34 PM UTC-8 tke...@gmail.com >>> wrote: >>> >>>> Hmm, the RAW and LOOP packets are as to be expected, yet the archive >>>> records contain the unwanted data. Something is injecting the bogus data >>>> into the data stream. Another request: run >>>> >>>> *wee_debug --info --output=/var/tmp/sanitized.txt* >>>> >>>> >>>> Look through /var/tmp/sanitized.txt to make sure that it doesn't >>>> include any unwanted passwords (they should have been obfuscated), then >>>> post it. >>>> >>>> Thanks again. >>>> >>>> -tk >>>> >>>> >>>> On Thu, Feb 17, 2022 at 6:33 PM Rob Cranfill <robcr...@gmail.com> >>>> wrote: >>>> >>>>> Your wish is my command! :-) >>>>> >>>>> On Thursday, February 17, 2022 at 5:52:21 PM UTC-8 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> That's great, but now you have my curiosity piqued! All of the >>>>>> channels have been shut off, yet the driver is still emitting values? How >>>>>> can this possibly be? >>>>>> >>>>>> Would you mind running weewxd directly from the command line with the >>>>>> attached instrumented version of vantage.py? It will print out exactly >>>>>> what >>>>>> is in the raw LOOP packets. >>>>>> >>>>>> Oh, and if you could run >>>>>> >>>>>> *wee_device --info* >>>>>> >>>>>> >>>>>> just one more time to make sure all the channels are truly off. >>>>>> >>>>>> Thanks, Rob! >>>>>> >>>>>> -tk >>>>>> >>>>>> >>>>>> On Thu, Feb 17, 2022 at 11:39 AM Rob Cranfill <robcr...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> I do still see various "soil" and "leaf" values in the REC & LOOP >>>>>>> data, but I'm happy now that I've simply removed the unwanted graphs >>>>>>> from >>>>>>> the "plot_groups" entry in Seasons' skin.conf file. (as seen at >>>>>>> http://robcranfill.net/weather/ :-) ) >>>>>>> >>>>>>> REC: 2022-02-17 11:32:00 PST (1645126320) 'altimeter': >>>>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': >>>>>>> 'None', >>>>>>> 'dateTime': '1645126320', 'dewpoint': '40.863280558436664', 'ET': '0.0', >>>>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'highOutTemp': >>>>>>> '46.7', 'humidex': '46.7', 'inDewpoint': '42.72068451224605', >>>>>>> 'inHumidity': >>>>>>> '59.0', 'inTemp': '56.9', 'interval': '1', 'leafTemp1': '-89.0', >>>>>>> 'leafTemp2': '-90.0', 'leafWet1': '1.0', 'leafWet2': '8.0', >>>>>>> 'lowOutTemp': >>>>>>> '46.7', 'maxSolarRad': 'None', 'outHumidity': '80.0', 'outTemp': '46.7', >>>>>>> 'pressure': '30.29821430422651', 'rain': '0.0', 'rainRate': '0.0', >>>>>>> 'rxCheckPercent': '98.22916666666667', 'soilMoist1': '4.0', >>>>>>> 'soilMoist2': >>>>>>> '8.0', 'soilMoist3': '4.0', 'soilMoist4': '32.0', 'soilTemp1': '-89.0', >>>>>>> 'soilTemp2': '-90.0', 'soilTemp3': '-89.0', 'soilTemp4': '-90.0', >>>>>>> 'txBatteryStatus': 'None', 'usUnits': '1', 'wind_samples': '23.0', >>>>>>> 'windchill': '46.7', 'windDir': '157.5', 'windGust': '4.0', >>>>>>> 'windGustDir': >>>>>>> '135.0', 'windrun': '0.03333333333333333', 'windSpeed': '2.0' >>>>>>> LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': >>>>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': >>>>>>> '0.8', >>>>>>> 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': >>>>>>> '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': >>>>>>> '0', >>>>>>> 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', >>>>>>> 'extraAlarm6': >>>>>>> '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', >>>>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': >>>>>>> '46.7', >>>>>>> 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': >>>>>>> '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', >>>>>>> 'monthET': >>>>>>> '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', >>>>>>> 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': >>>>>>> '30.29821430422651', >>>>>>> 'rain': 'None', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': >>>>>>> '0', >>>>>>> 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', >>>>>>> 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', >>>>>>> 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': >>>>>>> '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', >>>>>>> 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': >>>>>>> '8.44' >>>>>>> LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': >>>>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': >>>>>>> '0.8', >>>>>>> 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': >>>>>>> '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': >>>>>>> '0', >>>>>>> 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', >>>>>>> 'extraAlarm6': >>>>>>> '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', >>>>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': >>>>>>> '46.7', >>>>>>> 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': >>>>>>> '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', >>>>>>> 'monthET': >>>>>>> '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', >>>>>>> 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': >>>>>>> '30.29821430422651', >>>>>>> 'rain': '0.0', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': >>>>>>> '0', >>>>>>> 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', >>>>>>> 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', >>>>>>> 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': >>>>>>> '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', >>>>>>> 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': >>>>>>> '8.44' >>>>>>> >>>>>>> >>>>>>> On Wednesday, February 16, 2022 at 4:07:40 PM UTC-8 tke...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> Rob, I'll be curious to hear whether you continue to get bogus >>>>>>>> database entries after doing this. >>>>>>>> >>>>>>>> On Wed, Feb 16, 2022 at 11:50 AM Rob Cranfill <robcr...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Aha, I see that now in the 'info' output. >>>>>>>>> >>>>>>>>> After repeated applications of the proper wee_device command, >>>>>>>>> >>>>>>>>> wee_device --set-transmitter-type=*N*,10 >>>>>>>>> >>>>>>>>> I now have: >>>>>>>>> TRANSMITTERS: >>>>>>>>> Channel Receive Repeater Type >>>>>>>>> 1 active none iss >>>>>>>>> 2 inactive none (N/A) >>>>>>>>> 3 inactive none (N/A) >>>>>>>>> 4 inactive none (N/A) >>>>>>>>> 5 inactive none (N/A) >>>>>>>>> 6 inactive none (N/A) >>>>>>>>> 7 inactive none (N/A) >>>>>>>>> 8 inactive none (N/A) >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks! >>>>>>>>> >>>>>>>>> On Tuesday, February 15, 2022 at 11:35:22 AM UTC-8 >>>>>>>>> tke...@gmail.com wrote: >>>>>>>>> >>>>>>>>>> For some reason, every channel in your console is active. You can >>>>>>>>>> try shutting them all off except the ISS. Either do it through the >>>>>>>>>> console >>>>>>>>>> ( see your owners manual), or wee_device can do this. >>>>>>>>>> >>>>>>>>>> Generally the ISS is on channel 1. >>>>>>>>>> >>>>>>>>>> On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <robcr...@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Well that 'splains it! :-) I'll set about removing those (and >>>>>>>>>>> cleaning up the DB, right? As detailed elsewhere in this thread?) >>>>>>>>>>> >>>>>>>>>>> As requested, >>>>>>>>>>> >>>>>>>>>>> pi@pi3b:/etc/weewx $ wee_device --info >>>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>>> Using Vantage driver version 3.2.3 (weewx.drivers.vantage) >>>>>>>>>>> Unable to wake up console... sleeping >>>>>>>>>>> Unable to wake up console... retrying >>>>>>>>>>> Querying... >>>>>>>>>>> Davis Vantage EEPROM settings: >>>>>>>>>>> >>>>>>>>>>> CONSOLE TYPE: Vantage Vue >>>>>>>>>>> >>>>>>>>>>> CONSOLE FIRMWARE: >>>>>>>>>>> Date: Feb 3 2015 >>>>>>>>>>> Version: 4.18 >>>>>>>>>>> >>>>>>>>>>> CONSOLE SETTINGS: >>>>>>>>>>> Archive interval: 60 (seconds) >>>>>>>>>>> Altitude: 150 (foot) >>>>>>>>>>> Wind cup type: large >>>>>>>>>>> Rain bucket type: 0.01 inches >>>>>>>>>>> Rain year start: 1 >>>>>>>>>>> Onboard time: 2022-02-14 17:34:27 >>>>>>>>>>> >>>>>>>>>>> CONSOLE DISPLAY UNITS: >>>>>>>>>>> Barometer: mbar >>>>>>>>>>> Temperature: degree_F >>>>>>>>>>> Rain: inch >>>>>>>>>>> Wind: mile_per_hour >>>>>>>>>>> >>>>>>>>>>> CONSOLE STATION INFO: >>>>>>>>>>> Latitude (onboard): +47.6 >>>>>>>>>>> Longitude (onboard): -122.3 >>>>>>>>>>> Use manual or auto DST? AUTO >>>>>>>>>>> DST setting: N/A >>>>>>>>>>> Use GMT offset or zone code? ZONE_CODE >>>>>>>>>>> Time zone code: 4 >>>>>>>>>>> GMT offset: N/A >>>>>>>>>>> Temperature logging: LAST >>>>>>>>>>> Retransmit channel: OFF (0) >>>>>>>>>>> >>>>>>>>>>> TRANSMITTERS: >>>>>>>>>>> Channel Receive Repeater Type >>>>>>>>>>> 1 active none iss >>>>>>>>>>> 2 active none (N/A) >>>>>>>>>>> 3 active none (N/A) >>>>>>>>>>> 4 active none (N/A) >>>>>>>>>>> 5 active none (N/A) >>>>>>>>>>> 6 active none (N/A) >>>>>>>>>>> 7 active none (N/A) >>>>>>>>>>> 8 active none (N/A) >>>>>>>>>>> >>>>>>>>>>> RECEPTION STATS: >>>>>>>>>>> Total packets received: 24546 >>>>>>>>>>> Total packets missed: 143 >>>>>>>>>>> Number of resynchronizations: 0 >>>>>>>>>>> Longest good stretch: 677 >>>>>>>>>>> Number of CRC errors: 16 >>>>>>>>>>> >>>>>>>>>>> BAROMETER CALIBRATION DATA: >>>>>>>>>>> Current barometer reading: 29.980 inHg >>>>>>>>>>> Altitude: 150 feet >>>>>>>>>>> Dew point: 42 F >>>>>>>>>>> Virtual temperature: 48 F >>>>>>>>>>> Humidity correction factor: 1.8 >>>>>>>>>>> Correction ratio: 1.006 >>>>>>>>>>> Correction constant: +0.000 inHg >>>>>>>>>>> Gain: 0.000 >>>>>>>>>>> Offset: -33.000 >>>>>>>>>>> >>>>>>>>>>> OFFSETS: >>>>>>>>>>> Wind direction: +0 deg >>>>>>>>>>> Inside Temperature: +0.0 F >>>>>>>>>>> Inside Humidity: +0 % >>>>>>>>>>> Outside Temperature: +0.0 F >>>>>>>>>>> Outside Humidity: +0 % >>>>>>>>>>> >>>>>>>>>>> On Monday, February 14, 2022 at 3:28:09 PM UTC-8 >>>>>>>>>>> tke...@gmail.com wrote: >>>>>>>>>>> >>>>>>>>>>>> Rob, >>>>>>>>>>>> >>>>>>>>>>>> Before this version, weewx only reported on explicit tags. For >>>>>>>>>>>> example, if you didn't put $current.soilTemp1 in the template, you >>>>>>>>>>>> were not >>>>>>>>>>>> going to see it in the report. >>>>>>>>>>>> >>>>>>>>>>>> Now it basically reports on everything that's in the database. >>>>>>>>>>>> >>>>>>>>>>>> To stop it, look in the skin.conf file for the Seasons skin. >>>>>>>>>>>> Near the top, you will see a stanza labelled [DisplayOptions]. In >>>>>>>>>>>> this >>>>>>>>>>>> stanza are lists of the various types. Just remove any type for >>>>>>>>>>>> which you >>>>>>>>>>>> do not want to be included in the report. >>>>>>>>>>>> >>>>>>>>>>>> As for where these values are coming from, I have no idea. >>>>>>>>>>>> Either they are being emitted by your Vantage Vue, or they are >>>>>>>>>>>> being >>>>>>>>>>>> introduced by one of your extensions. It's also possible you are >>>>>>>>>>>> picking up >>>>>>>>>>>> sensors from a neighbor. >>>>>>>>>>>> >>>>>>>>>>>> In fact, now that I think about it, it would be worth seeing >>>>>>>>>>>> which sensors your Vantage is aware of. Try running >>>>>>>>>>>> >>>>>>>>>>>> *wee_device --info* >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -tk >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill < >>>>>>>>>>>> robcr...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> First, I guess I'm just confused as to why I'm getting all >>>>>>>>>>>>> this good stuff when my previous (<4.6) installation was happy >>>>>>>>>>>>> for so >>>>>>>>>>>>> long..... >>>>>>>>>>>>> >>>>>>>>>>>>> I just did a quick 'grep' looking around, and I do see that >>>>>>>>>>>>> the standard Seasons skin *defines* a bunch of these unwanted >>>>>>>>>>>>> values. Is >>>>>>>>>>>>> that enough to cause them to be reported? >>>>>>>>>>>>> >>>>>>>>>>>>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> You have to have something mapped to a lot of leaf and soil >>>>>>>>>>>>>> sensors. We'd need to see all your skin.conf files and your >>>>>>>>>>>>>> weewx.conf >>>>>>>>>>>>>> file to know for sure where they're coming from. If you can't >>>>>>>>>>>>>> find it, I'd >>>>>>>>>>>>>> suggest you use StdQC to just filter out the extraneous things >>>>>>>>>>>>>> (link >>>>>>>>>>>>>> to User's Guide) >>>>>>>>>>>>>> <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>. >>>>>>>>>>>>>> >>>>>>>>>>>>>> All your bogus temperatures seem to read crazy low numbers. >>>>>>>>>>>>>> Set the min/max to a range you'll never see and weewx should >>>>>>>>>>>>>> ignore them >>>>>>>>>>>>>> even if you can't find a way to turn them off. Perhaps >>>>>>>>>>>>>> something like the >>>>>>>>>>>>>> following (untested): >>>>>>>>>>>>>> >>>>>>>>>>>>>> [StdQC] >>>>>>>>>>>>>> [[MinMax]] >>>>>>>>>>>>>> leafTemp1 = 200, 201, deg_F >>>>>>>>>>>>>> leafTemp2 = 200, 201, deg_F >>>>>>>>>>>>>> soilTemp1 = 200, 201, deg_F >>>>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>> >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> -tk >>>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/1b11a3bb-719d-4e4d-9fd3-0280f293c2b5n%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/1b11a3bb-719d-4e4d-9fd3-0280f293c2b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/8db53f16-2527-415a-8a9a-0e895b0a077en%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/8db53f16-2527-415a-8a9a-0e895b0a077en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/c1d88982-79cb-4d1f-96ca-9d5b1a6d4d31n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/c1d88982-79cb-4d1f-96ca-9d5b1a6d4d31n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEDhgTvaKEH50suFdAb5vkvpfVVrEjr-sZWLrsWfRQaeNg%40mail.gmail.com.
