Well that 'splains it! :-) I'll set about removing those (and cleaning up
the DB, right? As detailed elsewhere in this thread?)
As requested,
pi@pi3b:/etc/weewx $ wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.2.3 (weewx.drivers.vantage)
Unable to wake up console... sleeping
Unable to wake up console... retrying
Querying...
Davis Vantage EEPROM settings:
CONSOLE TYPE: Vantage Vue
CONSOLE FIRMWARE:
Date: Feb 3 2015
Version: 4.18
CONSOLE SETTINGS:
Archive interval: 60 (seconds)
Altitude: 150 (foot)
Wind cup type: large
Rain bucket type: 0.01 inches
Rain year start: 1
Onboard time: 2022-02-14 17:34:27
CONSOLE DISPLAY UNITS:
Barometer: mbar
Temperature: degree_F
Rain: inch
Wind: mile_per_hour
CONSOLE STATION INFO:
Latitude (onboard): +47.6
Longitude (onboard): -122.3
Use manual or auto DST? AUTO
DST setting: N/A
Use GMT offset or zone code? ZONE_CODE
Time zone code: 4
GMT offset: N/A
Temperature logging: LAST
Retransmit channel: OFF (0)
TRANSMITTERS:
Channel Receive Repeater Type
1 active none iss
2 active none (N/A)
3 active none (N/A)
4 active none (N/A)
5 active none (N/A)
6 active none (N/A)
7 active none (N/A)
8 active none (N/A)
RECEPTION STATS:
Total packets received: 24546
Total packets missed: 143
Number of resynchronizations: 0
Longest good stretch: 677
Number of CRC errors: 16
BAROMETER CALIBRATION DATA:
Current barometer reading: 29.980 inHg
Altitude: 150 feet
Dew point: 42 F
Virtual temperature: 48 F
Humidity correction factor: 1.8
Correction ratio: 1.006
Correction constant: +0.000 inHg
Gain: 0.000
Offset: -33.000
OFFSETS:
Wind direction: +0 deg
Inside Temperature: +0.0 F
Inside Humidity: +0 %
Outside Temperature: +0.0 F
Outside Humidity: +0 %
On Monday, February 14, 2022 at 3:28:09 PM UTC-8 tke...@gmail.com wrote:
> Rob,
>
> Before this version, weewx only reported on explicit tags. For example, if
> you didn't put $current.soilTemp1 in the template, you were not going to
> see it in the report.
>
> Now it basically reports on everything that's in the database.
>
> To stop it, look in the skin.conf file for the Seasons skin. Near the top,
> you will see a stanza labelled [DisplayOptions]. In this stanza are lists
> of the various types. Just remove any type for which you do not want to be
> included in the report.
>
> As for where these values are coming from, I have no idea. Either they are
> being emitted by your Vantage Vue, or they are being introduced by one of
> your extensions. It's also possible you are picking up sensors from a
> neighbor.
>
> In fact, now that I think about it, it would be worth seeing which sensors
> your Vantage is aware of. Try running
>
> *wee_device --info*
>
>
> -tk
>
> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <robcr...@gmail.com> wrote:
>
>> First, I guess I'm just confused as to why I'm getting all this good
>> stuff when my previous (<4.6) installation was happy for so long.....
>>
>> I just did a quick 'grep' looking around, and I do see that the standard
>> Seasons skin *defines* a bunch of these unwanted values. Is that enough to
>> cause them to be reported?
>>
>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote:
>>
>>> You have to have something mapped to a lot of leaf and soil sensors.
>>> We'd need to see all your skin.conf files and your weewx.conf file to know
>>> for sure where they're coming from. If you can't find it, I'd suggest you
>>> use StdQC to just filter out the extraneous things (link to User's
>>> Guide) <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>.
>>>
>>> All your bogus temperatures seem to read crazy low numbers. Set the
>>> min/max to a range you'll never see and weewx should ignore them even if
>>> you can't find a way to turn them off. Perhaps something like the
>>> following (untested):
>>>
>>> [StdQC]
>>> [[MinMax]]
>>> leafTemp1 = 200, 201, deg_F
>>> leafTemp2 = 200, 201, deg_F
>>> soilTemp1 = 200, 201, deg_F
>>> soilTemp2 = 200, 201, deg_F
>>> soilTemp2 = 200, 201, deg_F
>>> soilTemp2 = 200, 201, deg_F
>>>
>>>
>>>
>>> --
>>
> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>>
> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com.
