Rob, Not that I think it has anything to do with the issue at hand but I suspect you have the incorrect sign on your station longitude, unless of course your station is actually in Zalantun, Mongolia. :)
Gary On Friday, 18 February 2022 at 13:28:55 UTC+10 robcr...@gmail.com wrote: > No, thank *you*! :-) > > > On Thursday, February 17, 2022 at 6:44:34 PM UTC-8 tke...@gmail.com wrote: > >> Hmm, the RAW and LOOP packets are as to be expected, yet the archive >> records contain the unwanted data. Something is injecting the bogus data >> into the data stream. Another request: run >> >> *wee_debug --info --output=/var/tmp/sanitized.txt* >> >> >> Look through /var/tmp/sanitized.txt to make sure that it doesn't include >> any unwanted passwords (they should have been obfuscated), then post it. >> >> Thanks again. >> >> -tk >> >> >> On Thu, Feb 17, 2022 at 6:33 PM Rob Cranfill <robcr...@gmail.com> wrote: >> >>> Your wish is my command! :-) >>> >>> On Thursday, February 17, 2022 at 5:52:21 PM UTC-8 tke...@gmail.com >>> wrote: >>> >>>> That's great, but now you have my curiosity piqued! All of the channels >>>> have been shut off, yet the driver is still emitting values? How can this >>>> possibly be? >>>> >>>> Would you mind running weewxd directly from the command line with the >>>> attached instrumented version of vantage.py? It will print out exactly >>>> what >>>> is in the raw LOOP packets. >>>> >>>> Oh, and if you could run >>>> >>>> *wee_device --info* >>>> >>>> >>>> just one more time to make sure all the channels are truly off. >>>> >>>> Thanks, Rob! >>>> >>>> -tk >>>> >>>> >>>> On Thu, Feb 17, 2022 at 11:39 AM Rob Cranfill <robcr...@gmail.com> >>>> wrote: >>>> >>>>> I do still see various "soil" and "leaf" values in the REC & LOOP >>>>> data, but I'm happy now that I've simply removed the unwanted graphs from >>>>> the "plot_groups" entry in Seasons' skin.conf file. (as seen at >>>>> http://robcranfill.net/weather/ :-) ) >>>>> >>>>> REC: 2022-02-17 11:32:00 PST (1645126320) 'altimeter': >>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': >>>>> 'None', >>>>> 'dateTime': '1645126320', 'dewpoint': '40.863280558436664', 'ET': '0.0', >>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'highOutTemp': >>>>> '46.7', 'humidex': '46.7', 'inDewpoint': '42.72068451224605', >>>>> 'inHumidity': >>>>> '59.0', 'inTemp': '56.9', 'interval': '1', 'leafTemp1': '-89.0', >>>>> 'leafTemp2': '-90.0', 'leafWet1': '1.0', 'leafWet2': '8.0', 'lowOutTemp': >>>>> '46.7', 'maxSolarRad': 'None', 'outHumidity': '80.0', 'outTemp': '46.7', >>>>> 'pressure': '30.29821430422651', 'rain': '0.0', 'rainRate': '0.0', >>>>> 'rxCheckPercent': '98.22916666666667', 'soilMoist1': '4.0', 'soilMoist2': >>>>> '8.0', 'soilMoist3': '4.0', 'soilMoist4': '32.0', 'soilTemp1': '-89.0', >>>>> 'soilTemp2': '-90.0', 'soilTemp3': '-89.0', 'soilTemp4': '-90.0', >>>>> 'txBatteryStatus': 'None', 'usUnits': '1', 'wind_samples': '23.0', >>>>> 'windchill': '46.7', 'windDir': '157.5', 'windGust': '4.0', >>>>> 'windGustDir': >>>>> '135.0', 'windrun': '0.03333333333333333', 'windSpeed': '2.0' >>>>> LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': >>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': '0.8', >>>>> 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': >>>>> '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': >>>>> '0', >>>>> 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', >>>>> 'extraAlarm6': >>>>> '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', >>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': >>>>> '46.7', >>>>> 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': >>>>> '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', >>>>> 'monthET': >>>>> '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', >>>>> 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': '30.29821430422651', >>>>> 'rain': 'None', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': >>>>> '0', >>>>> 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', >>>>> 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', >>>>> 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': >>>>> '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', >>>>> 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': >>>>> '8.44' >>>>> LOOP: 2022-02-17 11:32:30 PST (1645126350) 'altimeter': >>>>> '30.465171734312715', 'appTemp': '43.52206836601618', 'barometer': >>>>> '30.467', 'cloudbase': '1476.5271458098498', 'consBatteryVoltage': '0.8', >>>>> 'dateTime': '1645126350', 'dayET': '0.0', 'dayRain': '0.0', 'dewpoint': >>>>> '40.863280558436664', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': >>>>> '0', >>>>> 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', >>>>> 'extraAlarm6': >>>>> '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'forecastIcon': '6', >>>>> 'forecastRule': '9', 'heatindex': '44.830000000000005', 'humidex': >>>>> '46.7', >>>>> 'inDewpoint': '42.72068451224605', 'inHumidity': '59.0', 'insideAlarm': >>>>> '0', 'inTemp': '56.9', 'leafWet4': '0.0', 'maxSolarRad': 'None', >>>>> 'monthET': >>>>> '0.0', 'monthRain': '0.34', 'outHumidity': '80.0', 'outsideAlarm1': '0', >>>>> 'outsideAlarm2': '0', 'outTemp': '46.7', 'pressure': '30.29821430422651', >>>>> 'rain': '0.0', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': >>>>> '0', >>>>> 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', >>>>> 'stormRain': '0.0', 'sunrise': '1645110660', 'sunset': '1645148160', >>>>> 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '46.7', 'windDir': >>>>> '146.0', 'windGust': '2.0', 'windGustDir': '146.0', 'windrun': 'None', >>>>> 'windSpeed': '2.0', 'windSpeed10': '1.0', 'yearET': '0.0', 'yearRain': >>>>> '8.44' >>>>> >>>>> >>>>> On Wednesday, February 16, 2022 at 4:07:40 PM UTC-8 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> Rob, I'll be curious to hear whether you continue to get bogus >>>>>> database entries after doing this. >>>>>> >>>>>> On Wed, Feb 16, 2022 at 11:50 AM Rob Cranfill <robcr...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Aha, I see that now in the 'info' output. >>>>>>> >>>>>>> After repeated applications of the proper wee_device command, >>>>>>> >>>>>>> wee_device --set-transmitter-type=*N*,10 >>>>>>> >>>>>>> I now have: >>>>>>> TRANSMITTERS: >>>>>>> Channel Receive Repeater Type >>>>>>> 1 active none iss >>>>>>> 2 inactive none (N/A) >>>>>>> 3 inactive none (N/A) >>>>>>> 4 inactive none (N/A) >>>>>>> 5 inactive none (N/A) >>>>>>> 6 inactive none (N/A) >>>>>>> 7 inactive none (N/A) >>>>>>> 8 inactive none (N/A) >>>>>>> >>>>>>> >>>>>>> Thanks! >>>>>>> >>>>>>> On Tuesday, February 15, 2022 at 11:35:22 AM UTC-8 tke...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> For some reason, every channel in your console is active. You can >>>>>>>> try shutting them all off except the ISS. Either do it through the >>>>>>>> console >>>>>>>> ( see your owners manual), or wee_device can do this. >>>>>>>> >>>>>>>> Generally the ISS is on channel 1. >>>>>>>> >>>>>>>> On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <robcr...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Well that 'splains it! :-) I'll set about removing those (and >>>>>>>>> cleaning up the DB, right? As detailed elsewhere in this thread?) >>>>>>>>> >>>>>>>>> As requested, >>>>>>>>> >>>>>>>>> pi@pi3b:/etc/weewx $ wee_device --info >>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>> Using Vantage driver version 3.2.3 (weewx.drivers.vantage) >>>>>>>>> Unable to wake up console... sleeping >>>>>>>>> Unable to wake up console... retrying >>>>>>>>> Querying... >>>>>>>>> Davis Vantage EEPROM settings: >>>>>>>>> >>>>>>>>> CONSOLE TYPE: Vantage Vue >>>>>>>>> >>>>>>>>> CONSOLE FIRMWARE: >>>>>>>>> Date: Feb 3 2015 >>>>>>>>> Version: 4.18 >>>>>>>>> >>>>>>>>> CONSOLE SETTINGS: >>>>>>>>> Archive interval: 60 (seconds) >>>>>>>>> Altitude: 150 (foot) >>>>>>>>> Wind cup type: large >>>>>>>>> Rain bucket type: 0.01 inches >>>>>>>>> Rain year start: 1 >>>>>>>>> Onboard time: 2022-02-14 17:34:27 >>>>>>>>> >>>>>>>>> CONSOLE DISPLAY UNITS: >>>>>>>>> Barometer: mbar >>>>>>>>> Temperature: degree_F >>>>>>>>> Rain: inch >>>>>>>>> Wind: mile_per_hour >>>>>>>>> >>>>>>>>> CONSOLE STATION INFO: >>>>>>>>> Latitude (onboard): +47.6 >>>>>>>>> Longitude (onboard): -122.3 >>>>>>>>> Use manual or auto DST? AUTO >>>>>>>>> DST setting: N/A >>>>>>>>> Use GMT offset or zone code? ZONE_CODE >>>>>>>>> Time zone code: 4 >>>>>>>>> GMT offset: N/A >>>>>>>>> Temperature logging: LAST >>>>>>>>> Retransmit channel: OFF (0) >>>>>>>>> >>>>>>>>> TRANSMITTERS: >>>>>>>>> Channel Receive Repeater Type >>>>>>>>> 1 active none iss >>>>>>>>> 2 active none (N/A) >>>>>>>>> 3 active none (N/A) >>>>>>>>> 4 active none (N/A) >>>>>>>>> 5 active none (N/A) >>>>>>>>> 6 active none (N/A) >>>>>>>>> 7 active none (N/A) >>>>>>>>> 8 active none (N/A) >>>>>>>>> >>>>>>>>> RECEPTION STATS: >>>>>>>>> Total packets received: 24546 >>>>>>>>> Total packets missed: 143 >>>>>>>>> Number of resynchronizations: 0 >>>>>>>>> Longest good stretch: 677 >>>>>>>>> Number of CRC errors: 16 >>>>>>>>> >>>>>>>>> BAROMETER CALIBRATION DATA: >>>>>>>>> Current barometer reading: 29.980 inHg >>>>>>>>> Altitude: 150 feet >>>>>>>>> Dew point: 42 F >>>>>>>>> Virtual temperature: 48 F >>>>>>>>> Humidity correction factor: 1.8 >>>>>>>>> Correction ratio: 1.006 >>>>>>>>> Correction constant: +0.000 inHg >>>>>>>>> Gain: 0.000 >>>>>>>>> Offset: -33.000 >>>>>>>>> >>>>>>>>> OFFSETS: >>>>>>>>> Wind direction: +0 deg >>>>>>>>> Inside Temperature: +0.0 F >>>>>>>>> Inside Humidity: +0 % >>>>>>>>> Outside Temperature: +0.0 F >>>>>>>>> Outside Humidity: +0 % >>>>>>>>> >>>>>>>>> On Monday, February 14, 2022 at 3:28:09 PM UTC-8 tke...@gmail.com >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Rob, >>>>>>>>>> >>>>>>>>>> Before this version, weewx only reported on explicit tags. For >>>>>>>>>> example, if you didn't put $current.soilTemp1 in the template, you >>>>>>>>>> were not >>>>>>>>>> going to see it in the report. >>>>>>>>>> >>>>>>>>>> Now it basically reports on everything that's in the database. >>>>>>>>>> >>>>>>>>>> To stop it, look in the skin.conf file for the Seasons skin. Near >>>>>>>>>> the top, you will see a stanza labelled [DisplayOptions]. In this >>>>>>>>>> stanza >>>>>>>>>> are lists of the various types. Just remove any type for which you >>>>>>>>>> do not >>>>>>>>>> want to be included in the report. >>>>>>>>>> >>>>>>>>>> As for where these values are coming from, I have no idea. Either >>>>>>>>>> they are being emitted by your Vantage Vue, or they are being >>>>>>>>>> introduced by >>>>>>>>>> one of your extensions. It's also possible you are picking up >>>>>>>>>> sensors >>>>>>>>>> from a neighbor. >>>>>>>>>> >>>>>>>>>> In fact, now that I think about it, it would be worth seeing >>>>>>>>>> which sensors your Vantage is aware of. Try running >>>>>>>>>> >>>>>>>>>> *wee_device --info* >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -tk >>>>>>>>>> >>>>>>>>>> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <robcr...@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> First, I guess I'm just confused as to why I'm getting all this >>>>>>>>>>> good stuff when my previous (<4.6) installation was happy for so >>>>>>>>>>> long..... >>>>>>>>>>> >>>>>>>>>>> I just did a quick 'grep' looking around, and I do see that the >>>>>>>>>>> standard Seasons skin *defines* a bunch of these unwanted values. >>>>>>>>>>> Is that >>>>>>>>>>> enough to cause them to be reported? >>>>>>>>>>> >>>>>>>>>>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote: >>>>>>>>>>> >>>>>>>>>>>> You have to have something mapped to a lot of leaf and soil >>>>>>>>>>>> sensors. We'd need to see all your skin.conf files and your >>>>>>>>>>>> weewx.conf >>>>>>>>>>>> file to know for sure where they're coming from. If you can't find >>>>>>>>>>>> it, I'd >>>>>>>>>>>> suggest you use StdQC to just filter out the extraneous things >>>>>>>>>>>> (link >>>>>>>>>>>> to User's Guide) >>>>>>>>>>>> <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>. >>>>>>>>>>>> >>>>>>>>>>>> All your bogus temperatures seem to read crazy low numbers. >>>>>>>>>>>> Set the min/max to a range you'll never see and weewx should >>>>>>>>>>>> ignore them >>>>>>>>>>>> even if you can't find a way to turn them off. Perhaps something >>>>>>>>>>>> like the >>>>>>>>>>>> following (untested): >>>>>>>>>>>> >>>>>>>>>>>> [StdQC] >>>>>>>>>>>> [[MinMax]] >>>>>>>>>>>> leafTemp1 = 200, 201, deg_F >>>>>>>>>>>> leafTemp2 = 200, 201, deg_F >>>>>>>>>>>> soilTemp1 = 200, 201, deg_F >>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>> soilTemp2 = 200, 201, deg_F >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>>> -tk >>>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/1b11a3bb-719d-4e4d-9fd3-0280f293c2b5n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/1b11a3bb-719d-4e4d-9fd3-0280f293c2b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/8db53f16-2527-415a-8a9a-0e895b0a077en%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/8db53f16-2527-415a-8a9a-0e895b0a077en%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8d030d48-3826-4256-a2a7-a9241ec9806dn%40googlegroups.com.
