Steve:

Wow. This is the most thorough and well-researched issues ever.

One detail is deserving of comment.

Of particular interest to me was the report on EarthTech, the MOAC, and specifically the input from Dennis Letts. I was not aware of the following (wrt the Letts/Cravens effect):

"I made and tested 59 cells between August 2003 and February 2007; all of them failed. Most were tested in MOAC, but a few were tested in my calorimeter.

I am not sure what changed after August 2003 [the initial positive report and hoopla]. I haven't had time for thorough testing; however, it may be the deuterium oxide that I used from Aldrich.

The positive effect returned in March 2007 with experiment #DGL 662; the previous cell that had worked was during ICCF10, #DGL602.

The laser effect returned with only two known differences in the configuration: (1) I loaded cell #662 without using magnets but added them after the cathode was loaded. (2) For the first time ever, I bought a 500 mL bottle of deuterium oxide which had a different batch number from all of the previous 100 mL bottles used that did not work. So maybe impurities in, or missing from, the deuterium oxide purchased 2003-07 are important."


END of Letts quote.

Previously, we knew there were problems with the replication of the L/C effect, but many of us had thought (hoped) that the effect was much more robust than it turns out from this comment.

Could the instability of the effect be related to the heavy water from Aldrich?

One would not think so, since the impurity level must be miniscule.

However. Can you smell it? There is one huge 800 pound gorilla involved with heavy water, which has been alluded to before, but on which the level of "official" information is surprisingly sparce.

Unless it is made clear from the manufacturer (supplier), the percentage of the heavy isotope of oxygen: 18O is that aforementioned "large Simian" ... and let us hope that Aldrich is not somehow involved in am intentional deception - in that in any batch of deuterium oxide, the heavy oxygen component can conceivably range from less than 1% enrichment to near 100% enrichment !! Was the content known?? We can only hope that this is not a case of "don't ask. don't tell" and that the heavy water did not come from China.

Over a year ago, in a post here - I made the comment:

"AND there is always the further possibility that O-18 is the under-appreciated difference [sole or contributory active isotope] in some types of LENR work" ... since it it can be present with an unnoticed but substantially variable ratio"

IOW... whereas some deuterium is always in light water, 'heavy water' from a supplier may or may not be intentional depleted or unintentionally enriched in 18O. (The depleted 18O variety can be more costly). Therefore, the ratio (O18/O16) can be enormously variable and is seldom mentioned. Yet how many researchers know this?

Even in light water, the percentage is wildly variable depending on the source of water, and will increase over time if an electrolyte is being reused (i.e. in an LENR cell which does not employ recombination such as Mizuno's, the electrolyte is recycled over and over again).

As posted a few months ago, the heavy isotope of oxygen is far more ubiquitous in nature than many realize. It is 15 time more prevalent in ocean water (percentage-wise) than is deuterium, for instance! but the interesting part is that it is enriched naturally in biological life (osmosis in plants will enrich).

One in every 6000 molecules of sea water is HDO instead of H2O. It
is erroneous to call this molecule "heavy water" however (which technically is a double substituion, or DDO): and DDO is essentially nonexistent in seawater for all practical purposes.

YET - Five in every one thousand molecules of sea water (.5 %) has an 18O oxygen isotope instead of 16O. That is rather extraordinary considering how seldom it is mentioned. Surface water has less as the lighter isotope evaporates first and is retained in any osmotic process. The mass difference is substantial. The water in some fruits and plant leaves is enriched, reportedly, to a full 1 percent 18O.

If you buy "heavy water" which is sold on the basis of registering 20 amu - it is possible to be getting NO deuterium at all - and all heavy water which comes from distillation manufacturing processes should register 22 instead of 20 since the 18O is selected faster than the D2.

Without clarification from the supplier, a variation in ratio of nearly 100% - from near zero to full is easily possible in any experiment !! This is because many enrichment processes, which enrich in Deuterium, also "silently" enrich in 18O and many suppliers are buying from China (like everything else).

In "light water" the amount of natural 18O depends on the source of the water but it is ALWAYS much higher than the natural percentage of deuterium. Rainwater is low in 18O for the "flip side" of the reason that it is enriched in the oceans.

To repeat: in desalted seawater, there are 5 atoms of 18O per 1000 atoms of 16O, which is about 15 time higher than the expected percentage of HDO to H2O... and this is much higher than most people realize, plus - and in addition to the starting percentage being higher in ocean water, it is much higher yet when the water source comes from hot springs or is extracted from vegetation. And some (but not all) of those same distillation or enrichment processes which enrich in D are even more effective in enriching in 18O - so it is easily possible to get 100% 18O ahead of getting a usable percentage of D.

Jones



Reply via email to