Hi Alex, I know that Ettus Research is aware of this and it's being looked at as a possible feature. In the current version of UHD, you still have to make manual changes to the FPGA to access the GPIO from RFNoC. The changes aren't particularly difficult, but it can be intimidating if you're not familiar with FPGA code or RFnoC. It basically involves following the DIOA_FPGA and/or DIOB_FPGA signals through the design and disconnecting them cleanly from the normal logic, and then reconnecting them to the RFNoC image.
Thanks, Wade On Thu, Feb 6, 2025 at 7:39 AM Alex Humberstone < alex.m.humberst...@gmail.com> wrote: > I'm working on the same thing, so yes this would be super useful. > > Does Ettus Research have any update on that GitHub issue #666? > > Here's the link again: > https://github.com/EttusResearch/uhd/issues/666 > > > Sincerely, > Alex-M-Humberstone > PhD Student > Klipsch School of Electrical Engineering > New Mexico State University (NMSU) > Las Cruces, New Mexico, 88003 > alex.m.humberst...@gmail.com > https://ece.nmsu.edu/ > > > > On Mon, 3 Feb 2025 at 02:15, Philipp Niedermayer <p.niederma...@gsi.de> > wrote: > >> Hi, >> >> this is currently not possible without changing the UHD core manually >> and re-routing those GPIO lines in the Verilog core code. Some years ago >> I opened a feature request, it contains some hints on what others tried >> and what would be required. Unfortunately, I never got an answer. >> >> Would be wonderful if you could support that by voting on the issue and >> express your interest there. Or if you manage to get it working, share >> your solution with a PR. >> >> Here is the link: https://github.com/EttusResearch/uhd/issues/666 >> >> Best regards >> Philipp >> >> >> Am 3.2.25 um 9:00 schrieb meni.d...@sabra-microsystems.com: >> > >> > Hello, >> > >> > I need to establish direct routing between the USRP X410's front panel >> > GPIO pins and custom RFNoC blocks. >> > >> > Specifically, I want to read the GPIO signals directly into my RFNoC >> > block. >> > >> > Does anyone have experience implementing such direct GPIO-to-RFNoC >> > connection on the X410? >> > >> > Any examples or technical documentation would be helpful. >> > >> > Thanks >> > >> > >> > _______________________________________________ >> > USRP-users mailing list -- usrp-users@lists.ettus.com >> > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >> _______________________________________________ >> USRP-users mailing list -- usrp-users@lists.ettus.com >> To unsubscribe send an email to usrp-users-le...@lists.ettus.com >> > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
