Unfortunately this likely
Means you have broken hardware. 

If it was Purchased less than one year ago, send a note to supp...@ettus.com 
for warranty support. 

Sent from my iPhone

> On Jul 11, 2022, at 3:26 PM, pro jason <jason_p...@outlook.com> wrote:
> 
> 
> Hi Marcus,
> 
> Thank you for your reply.
> The image file we use is a standard image file from Ettus Research, which has 
> not been modified. 
> We have several pcs of B200mini-i, and only one device reports this error. 
> 
> Best regards,
> Jason
> 
> 
> 
> From: Marcus D. Leech <patchvonbr...@gmail.com>
> Sent: Sunday, June 12, 2022 2:42 AM
> To: pro jason <jason_p...@outlook.com>
> Subject: Re: [USRP-users] RuntimeError: fx3 is in state 5
>  
>> On 2022-06-11 13:24, pro jason wrote:
>> Hi all,
>> 
>> One of our b200mini-i is not working properly. The faults are as follows:
>> 
>> uhd_usrp_probe
>> [INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; 
>> UHD_4.2.0.HEAD-0-g46a70d85
>> [INFO] [B200] Loading firmware image: 
>> /usr/local/share/uhd/images/usrp_b200_fw.hex...
>> [INFO] [B200] Detected Device: B200mini
>> [INFO] [B200] Loading FPGA image: 
>> /usr/local/share/uhd/images/usrp_b200mini_fpga.bin...
>> Error: RuntimeError: fx3 is in state 5
>> 
>> We tried to replace the computer or USB cable, but the fault still exists. 
>> Is there a solution? If the hardware is damaged, which chip is likely to 
>> fail?
>> 
>> Best regards,
>> Jason
>> 
>> 
>> _______________________________________________
>> USRP-users mailing list -- usrp-users@lists.ettus.com
>> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
> Make sure your FPGA image is correct--is it the same as on other working 
> systems?
> 
> That error message indicates that the FX3 chip (USB interface) was unable to 
> load the FPGA image--either because
>   the FPGA isn't responding correctly, or there's something wrong with the 
> image.
> 
> 
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com

Reply via email to