Hi Wade,
Thanks for the answer. So "rfnoc_chdr" in the yml file is "bus_clk"?
In the report timing summary, I see many clocks but there is no
"rfnoc_chdr", maybe is linked somewhere else in the framework?:
------------------------------------------------------------------------------------------------
| Clock Summary
| -------------
------------------------------------------------------------------------------------------------
Clock
Waveform(ns) Period(ns) Frequency(MHz)
-----
------------ ---------- --------------
DB0_ADC_DCLK
{0.000
2.500} 5.000 200.000
DB1_ADC_DCLK
{0.000
2.500} 5.000 200.000
ETH_CLK
{0.000 4.000} 8.000 125.000
FPGA_125MHz_CLK
{0.000
4.000} 8.000 125.000
bus_clk
{0.000 2.667} 5.333 187.500
bus_clk_div2
{0.000 5.333} 10.667 93.750
ce_clk
{0.000 2.333} 4.667 214.286
clkfbout_pcie_clk_gen
{0.000 4.000} 8.000 125.000
ioport2_clk
{0.000 4.000} 8.000 125.000
IoPort2Wrapperx/TxClockGenx/TxUseMmcm.ClkFbOutMmcm
{0.000 4.000} 8.000
125.000
IoPort2Wrapperx/TxClockGenx/TxUseMmcm.ClkOut0Mmcm
{0.000 2.000} 4.000
250.000
IoTxClock
{0.000 2.000} 4.000 250.000
IoPort2Wrapperx/TxClockGenx/TxUseMmcm.ClkOut1Mmcm
{0.000 4.000} 8.000
125.000
ioport2_idelay_ref_clk
{0.000 2.500} 5.000 200.000
rio40_clk
{0.000 12.500} 25.000 40.000
FPGA_CLK
{0.000 2.500} 5.000 200.000
CLK_OUT3_radio_clk_gen
{0.417
1.667} 2.500 400.000
DB0_DAC_DCI
{0.417 1.667} 2.500 400.000
DB1_DAC_DCI
{0.417 1.667} 2.500 400.000
clkfbout_radio_clk_gen
{0.000 2.500} 5.000 200.000
radio_clk
{0.000 2.500} 5.000 200.000
radio_clk_2x
{-0.312 0.937} 2.500 400.000
How do I know which clock of those is going to my design?
Kind Regards,
Maria
El mar, 31 may 2022 a las 22:30, Wade Fife (<[email protected]>) escribió:
> Hi Maria,
>
> You have the right idea. You should be able to change the srcport from
> "ce" to "rfnoc_chdr" in the line for your block in the clk_domains section.
> If that doesn't work, share your YML file and maybe someone can spot the
> problem.
>
> Wade
>
> On Tue, May 31, 2022 at 3:47 AM Maria Muñoz <[email protected]> wrote:
>
>> Hi all,
>>
>> I have generated a custom RFNoC block with rfnocmodtool to be implemented
>> on X310.
>> I am using UHD 4.0. toolchain to synthesize it, but I cannot meet timing
>> with the clock selected (in /icores/yml file, I have select "ce" as the clk
>> source for my block).
>> I see that "ce" clock for X310 is 214 MHz and I wondered if I could use a
>> slower clock for my "ce" from the interface. In the clock reports, there is
>> a "bus_clk" of 187.5 MHz, which I think is suitable for my design, but if I
>> select "bus_clk" as clk source for my block in the yml file it gives an
>> error message:
>> [ERR] 1 unresolved clk domain(s)
>> [ERR] block0:ce
>> [ERR] Please specify the clock(s) to connect
>>
>> It is possible to use "bus_clk" as the clock source for my block? Which
>> files should I modify to use this clock?
>>
>> Kind Regards,
>> Maria
>> _______________________________________________
>> USRP-users mailing list -- [email protected]
>> To unsubscribe send an email to [email protected]
>>
>
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
