Hi Neel,
Thanks for the quick response! As a clarification:
- for half-duplex operation, is the receiver muted (and protected)
during transmit?
- I could not find the sample rates on your website.
---
Barry Duggan KV4FV
https://github.com/duggabe
On 10/28/20 7:57 PM, Neel Pandeya wrote:
Hello Barry:
On the B200mini, you can transmit (on the TX/RX port) and receive (on
the RX2 port) at the same time.
The minimum sample rate depends on the lowest master clock rate and the
maximum decimation factor. I don't recall these values off the top of
my head, but I'll go double-check them. The maximum sampling rate is
61.44 Msps.
--Neel Pandeya
On Wed, 28 Oct 2020 at 19:45, Barry Duggan via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
Using a B200mini, I have the following questions:
- If I have one antenna connected to the TRX port, is the receiver
blocked during a transmit?
- What are the maximum and minimum sample rates supported?
Thanks,
---
Barry Duggan KV4FV
https://github.com/duggabe
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
