... the "UHD.3.15.LTS" branch, not tag:
{{{
% git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/UHD-3.10
remotes/origin/UHD-3.11
remotes/origin/UHD-3.12
remotes/origin/UHD-3.13
remotes/origin/UHD-3.14
remotes/origin/UHD-3.14.L
remotes/origin/UHD-3.15.LTS
remotes/origin/UHD-3.9.LTS
remotes/origin/master
remotes/origin/rfnoc-devel
remotes/origin/rfnoc-ofdm
remotes/origin/x300_fp_gpio_fix
}}}
---
Michael Dickens
Ettus Research Technical Support
Email: supp...@ettus.com
Web: https://ettus.com/
On Thu, May 21, 2020 at 11:35 AM Hodges, Jeff via USRP-users <
usrp-users@lists.ettus.com> wrote:
> I apologize for my ignorance, which of these is the LTS tag?
>
>
>
> git tag -l
>
> 003_007_002_rc1
>
> 003_007_003_rc1
>
> 003_008_000_rc1
>
> 003_008_002_rc1
>
> 003_008_003_rc1
>
> 003_008_004_rc1
>
> 003_008_005_rc1
>
> 003_009_000_rc1
>
> 003_009_002_rc1
>
> 003_009_003_rc1
>
> 003_009_004_rc1
>
> 003_009_005_rc1
>
> 003_009_006_rc1
>
> 003_009_007_rc1
>
> 003_010_001_000_rc1
>
> 003_010_001_000_rc2
>
> 003_010_001_001_rc1
>
> 003_010_002_000_rc1
>
> 003_010_003_000_rc1
>
> 003_010_003_000_rc2
>
> 003_011_000_000_rc1
>
> 003_011_000_001_rc1
>
> grcon_2016
>
> n310_release-0.1
>
> release_003_000_000
>
> release_003_000_001
>
> release_003_001_000
>
> release_003_001_001
>
> release_003_001_002
>
> release_003_002_000
>
> release_003_002_001
>
> release_003_002_002
>
> release_003_002_003
>
> release_003_002_004
>
> release_003_003_000
>
> release_003_003_001
>
> release_003_003_002
>
> release_003_004_000
>
> release_003_004_001
>
> release_003_004_002
>
> release_003_004_003
>
> release_003_004_004
>
> release_003_004_005
>
> release_003_005_000
>
> release_003_005_001
>
> release_003_005_002
>
> release_003_005_003
>
> release_003_005_004
>
> release_003_005_005
>
> release_003_006_000
>
> release_003_006_001
>
> release_003_006_002
>
> release_003_007_000
>
> release_003_007_001
>
> release_003_007_002
>
> release_003_007_003
>
> release_003_008_000
>
> release_003_008_001
>
> release_003_008_002
>
> release_003_008_003
>
> release_003_008_003-1
>
> release_003_008_004
>
> release_003_008_005
>
> release_003_009_000
>
> release_003_009_001
>
> release_003_009_002
>
> release_003_009_003
>
> release_003_009_004
>
> release_003_009_005
>
> release_003_009_006
>
> release_003_009_007
>
> release_003_010_000_000
>
> release_003_010_001_000
>
> release_003_010_001_001
>
> release_003_010_002_000
>
> release_003_010_003_000
>
> release_003_011_000_000
>
> release_003_011_000_001
>
> v3.11.0.0
>
> v3.11.0.1
>
> v3.11.0.1-20180419
>
> v3.11.0.1-rc1
>
> v3.11.1.0
>
> v3.11.1.0-rc1
>
> v3.12.0.0
>
> v3.12.0.0-rc1
>
> v3.12.0.1-rc1
>
> v3.13.0.0
>
> v3.13.0.0-rc1
>
> v3.13.0.1
>
> v3.13.0.2
>
> v3.13.0.3-rc1
>
> v3.13.1.0
>
> v3.13.1.0-rc1
>
> v3.13.1.0-rc2
>
> v3.14.0.0
>
> v3.14.0.0-a0-20181220
>
> v3.14.0.0-a1-20181220
>
> v3.14.0.0-rc1
>
> v3.14.0.0-rc2
>
> v3.14.0.0-rc3
>
> v3.14.1.0
>
> v3.14.1.0-rc1
>
> v3.14.1.1
>
> v3.14.1.1-rc1
>
> v3.14.1.1.L
>
> v3.15.0.0
>
> v3.15.0.0-e310_prerelease
>
> v3.15.0.0-rc2
>
> v3.15.0.0-rc3
>
>
>
>
>
>
>
> Jeff
>
>
>
> *From:* Carmichael, Ryan <ryan.carmich...@dynetics.com>
> *Sent:* Thursday, May 21, 2020 11:29 AM
> *To:* usrp-users@lists.ettus.com
> *Cc:* Hodges, Jeff <jeff.hod...@gtri.gatech.edu>
> *Subject:* Re: [USRP-users] rfnoc build standard image x310 failing
>
>
>
> I think you want to be using the UHD-3.15.LTS tag.
>
>
>
> - Ryan
>
>
>
> *From:* USRP-users <usrp-users-boun...@lists.ettus.com> *On Behalf Of *Hodges,
> Jeff via USRP-users
> *Sent:* Thursday, May 21, 2020 10:25 AM
> *To:* Jonathon Pendlum <jonathon.pend...@ettus.com>
> *Cc:* usrp-users@lists.ettus.com; Prado, Ron <ron.pr...@gtri.gatech.edu>
> *Subject:* [EXTERNAL] Re: [USRP-users] rfnoc build standard image x310
> failing
>
>
>
> Maybe there is a mistake in they way I am pulling the repository?
>
>
>
> V3.14 with 2017.4 vivado failed:
>
> cd ~/rfnoc/src
>
> $ git clone --recursive https://github.com/EttusResearch/uhd
>
> $ cd uhd
>
> $ git checkout v3.14.1.1
>
> $ git submodule update --init --recursive
>
>
>
> V3.15 with 2018.3 vivado failed:
>
> cd ~/rfnoc/src
>
> $ git clone --recursive https://github.com/EttusResearch/uhd
>
> $ cd uhd
>
> $ git checkout v3.15.0.0
>
> $ git submodule update --init --recursive
>
>
>
> Am I pulling the wrong branches?
>
>
>
> Looking at uhd_image_builder.py in v3.15.0.0:
>
> 44 wire ce_clk = radio_clk;
>
> 45 wire ce_rst = radio_rst;
>
>
>
>
>
> Jeff
>
>
>
> *From:* Jonathon Pendlum <jonathon.pend...@ettus.com>
> *Sent:* Thursday, May 21, 2020 2:01 AM
> *To:* Hodges, Jeff <jeff.hod...@gtri.gatech.edu>
> *Cc:* usrp-users@lists.ettus.com; Prado, Ron <ron.pr...@gtri.gatech.edu>
> *Subject:* Re: [USRP-users] rfnoc build standard image x310 failing
>
>
>
> Hi Jeff,
>
>
>
> For UHD 3.15, I believe that issue has been fixed. Check out the
> UHD-3.15.LTS branch and let me know if you still have an issue building.
>
>
>
> For UHD 3.14, check out the UHD-3.14 branch.
>
>
>
> Using the branches above, I was able to successfully build an image using
> your uhd_image_builder command (without the -g option) for both UHD 3.15
> and UHD 3.14.
>
>
>
> Jonathon
>
>
>
>
>
> On Wed, May 20, 2020 at 8:35 PM Hodges, Jeff via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
> Can someone please tell me what version of uhd and rfnoc are compatible
> for building an image on Ubuntu 18.04?
>
>
>
> I cannot get any of the UHD releases to properly build a standard rfnoc
> image.
>
>
>
> sudo ./uhd_image_builder.py fft ddc duc -g -t X310_RFNOC_HG -c -d X310
> --fill-with-fifos
>
>
>
> I installed vivado 2018.3 with uhd 3.15.0.0 and get the error:
>
>
>
> ERROR: [DRC MDRV-1] Multiple Driver Nets: Net bus_clk_gen/inst/CLK_OUT4
> has multiple drivers: radio_clk_gen/inst/clkout1_buf/O, and
> bus_clk_gen/inst/clkout4_buf/O.
>
> ERROR: [DRC MDRV-1] Multiple Driver Nets: Net
> radio_reset_sync/reset_double_sync/synchronizer_false_path/value[9]_9 has
> multiple drivers:
> radio_reset_sync/reset_double_sync/synchronizer_false_path/stages[9].value_reg[9][0]/Q,
> and
> ce_reset_sync/reset_double_sync/synchronizer_false_path/stages[9].value_reg[9][0]/Q.
>
>
>
>
>
> I installed vivado 2017.4 with uhd 3.14.1.1 and get this error:
>
>
>
> BUILDER: Releasing IP location:
> /home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/aurora_64b66b_pcs_pma
>
> Using parser configuration from:
> /home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/dev_config.json
>
> [00:00:00] Executing command: vivado -mode batch -source
> /home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build_x300.tcl -log
> build.log -journal x300.jou
>
> CRITICAL WARNING: [filemgmt 20-1440] File
> '/home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ddr3_32bit/ddr3_32bit/user_design/rtl/clocking/mig_7series_v4_0_tempmon.v'
> already exists in the project as a part of sub-design file
> '/home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ddr3_32bit/ddr3_32bit.xci'.
> Explicitly adding the file outside the scope of the sub-design can lead to
> unintended behaviors and is not recommended.
>
> [00:00:29] Current task: Initialization +++ Current Phase: Starting
>
> [00:00:29] Current task: Initialization +++ Current Phase: Finished
>
> [00:00:29] Executing Tcl: synth_design -top x300 -part xc7k410tffg900-2
> -verilog_define BUILD_1G=1 -verilog_define BUILD_10G=1 -verilog_define
> SFP0_1GBE=1 -verilog_define SFP1_10GBE=1 -verilog_define RFNOC=1
> -verilog_define X310=1 -verilog_define GIT_HASH=32'hfbb85bdf
>
> [00:00:29] Starting Synthesis Command
>
> ERROR: [Synth 8-439] module 'ddr3_32bit' not found
> [/home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/x300.v:1191]
>
> ERROR: [Synth 8-285] failed synthesizing module 'x300'
> [/home/nvd/rfnoc/src/uhd/fpga-src/usrp3/top/x300/x300.v:20]
>
> ERROR: [Common 17-69] Command failed: Synthesis failed - please see the
> console or run log file for details
>
> [00:08:36] Current task: Synthesis +++ Current Phase: Starting
>
> [00:08:36] Current task: Synthesis +++ Current Phase: Finished
>
> [00:08:36] Process terminated. Status: Failure
>
>
>
>
>
> Any advice is greatly appreciated.
>
>
>
> Thanks,
>
>
>
> Jeff
>
>
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
> * ------------------------------ *
>
> *The information contained in this message, and any attachments, may
> contain privileged and/or proprietary information that is intended solely
> for the person or entity to which it is addressed. Moreover, it may contain
> export restricted technical data controlled by Export Administration
> Regulations (EAR) or the International Traffic in Arms Regulations (ITAR).
> Any review, retransmission, dissemination, or re-export to foreign or
> domestic entities by anyone other than the intended recipient in accordance
> with EAR and/or ITAR regulations is prohibited.*
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
