Yes already tried different cable. Same issue :(
One usrp is good but the other says SSSSS!.



On Wed, Jul 17, 2019 at 3:18 PM Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com> wrote:

> On 07/17/2019 07:45 AM, Sumit Kumar via USRP-users wrote:
>
> Hi Jason,
>
> Yes they are consistent, I mean the output of uhd_usrp_probe for both N200
> is exactly the same (except the ip, serial and mac addr).
> I do not know where the problem is! Hardware or software
>
> Regards
> Sumit
>
> My guess is that you have a hardware issue.  Have you tried simple things,
> like a different ethernet cable?
>
>
>
> On Wed, Jul 17, 2019 at 1:19 PM Jason Matusiak <
> ja...@gardettoengineering.com> wrote:
>
>> I am not really an N-series guy, so this probably won't be helpful.  Have
>> you tried doing a uhd_usrp_probe on both devices and seen that the
>> responses are consistent?
>>
>> ------------------------------
>> *From:* USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of
>> Sumit Kumar via USRP-users <usrp-users@lists.ettus.com>
>> *Sent:* Wednesday, July 17, 2019 7:15 AM
>> *To:* usrp-users@lists.ettus.com <usrp-users@lists.ettus.com>
>> *Subject:* [USRP-users] Sequence Errors N200
>>
>> Hi,
>> I am trying transmit using Ettus N200 (call it A) but getting this error
>> message on the console
>>
>>
>> SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
>>
>> I looked for it on google and found these links
>>
>> http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2014-May/037495.html
>>
>> http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2012-July/032838.html
>>
>> Both the links  suggested problem related to the gigabit port. Then I
>> connected another USRP N200 (call it B) to the same laptop and tried
>> transmitting using that as there were no such sequence error messages.
>>
>> This makes me believe there is some problem with the first USRP, i.e., A.
>>
>> Further I tried with different versions of UHD 3.11, UHD 3.15.. but its
>> the same.
>>
>> Receive is good only transmit is throwing error.
>>
>> Not only with UHD, even in labview, when I transmit, I see nothing coming
>> out from the N200 (A).
>>
>> I am using SBXv2 daughter board.
>>
>> Any clue!
>>
>> Regards
>> --
>> --
>> Sumit kumar
>> Postdoc
>> SnT, Luxembourg
>>
>>
>>
>
> --
> --
> Sumit kumar
> Postdoc
> SnT, Luxembourg
>
>
>
>
> _______________________________________________
> USRP-users mailing 
> listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>


-- 
-- 
Sumit kumar
Postdoc
SnT, Luxembourg
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to