On 07/17/2019 07:45 AM, Sumit Kumar via USRP-users wrote:
Hi Jason,
Yes they are consistent, I mean the output of uhd_usrp_probe for both
N200 is exactly the same (except the ip, serial and mac addr).
I do not know where the problem is! Hardware or software
Regards
Sumit
My guess is that you have a hardware issue. Have you tried simple
things, like a different ethernet cable?
On Wed, Jul 17, 2019 at 1:19 PM Jason Matusiak
<ja...@gardettoengineering.com <mailto:ja...@gardettoengineering.com>>
wrote:
I am not really an N-series guy, so this probably won't be
helpful. Have you tried doing a uhd_usrp_probe on both devices
and seen that the responses are consistent?
------------------------------------------------------------------------
*From:* USRP-users <usrp-users-boun...@lists.ettus.com
<mailto:usrp-users-boun...@lists.ettus.com>> on behalf of Sumit
Kumar via USRP-users <usrp-users@lists.ettus.com
<mailto:usrp-users@lists.ettus.com>>
*Sent:* Wednesday, July 17, 2019 7:15 AM
*To:* usrp-users@lists.ettus.com
<mailto:usrp-users@lists.ettus.com> <usrp-users@lists.ettus.com
<mailto:usrp-users@lists.ettus.com>>
*Subject:* [USRP-users] Sequence Errors N200
Hi,
I am trying transmit using Ettus N200 (call it A) but getting this
error message on the console
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
I looked for it on google and found these links
http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2014-May/037495.html
http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2012-July/032838.html
Both the links suggested problem related to the gigabit port.
Then I connected another USRP N200 (call it B) to the same laptop
and tried transmitting using that as there were no such sequence
error messages.
This makes me believe there is some problem with the first USRP,
i.e., A.
Further I tried with different versions of UHD 3.11, UHD 3.15..
but its the same.
Receive is good only transmit is throwing error.
Not only with UHD, even in labview, when I transmit, I see nothing
coming out from the N200 (A).
I am using SBXv2 daughter board.
Any clue!
Regards
--
--
Sumit kumar
Postdoc
SnT, Luxembourg
--
--
Sumit kumar
Postdoc
SnT, Luxembourg
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
