Hello guys,

I am a researcher working with the X310 USRP. I have a couple of questions 
regarding the Hardware clocks.
The bus_clock and radio_clk are by default respectively set at 166 MHz and 200 
MHz.
And if I am right the crossbar clock ce_clk is also at 200 MHz. Is there a 
solution to bring it down to ce_clk = 50 MHz, in that case

1)      Does it mean that all the Kintex XC410T blocks will run at 50 MHz ? Is 
this safe?

2)       What about the ADC and DAC and their sampling clock?

3)      Finally can we have different RFnoc blocks running at different clock 
frequencies and still have the  crossbar  running at a given clock frequency?

Best Regards
Cherif
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to