Thank you!!! :) El mié., 12 dic. 2018 a las 15:42, Robin Coxe (<robin.c...@ettus.com>) escribió:
> You may have multiple versions of GNU Radio and/or UHD libraries still > installed on your PC. Try navigating to the wherever you installed them > (e.g., /usr/local/lib) and deleting the ones you don’t want by hand. > > > > Robin Coxe | Chief R&D Program Manager, SDR | Santa Clara, CA | > 408.610.6363 > > ------------------------------ > *From:* USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of > Carlos Alberto Ruiz Naranjo via USRP-users <usrp-users@lists.ettus.com> > *Sent:* Wednesday, December 12, 2018 4:17 AM > *To:* patchvonbr...@gmail.com > *Cc:* USRP-users@lists.ettus.com > *Subject:* Re: [USRP-users] USRP1 support: "unknown" daughterboard > > Hi Marcus, > > I have changed the version to UHD-3.9.LTS. With *uhd_usrp_probe > --args="type=usrp1" *I haven't erros. But I don't know why the GNURadio > version hasn't changed... I have, with the previous errors : > > *GNU C++ version 7.3.0; Boost_106501; UHD_4.0.0.rfnoc-devel-702-* > *geec24d7b* > > Any idea? > > Thank you. > > El mar., 11 dic. 2018 a las 22:42, Marcus D. Leech via USRP-users (< > usrp-users@lists.ettus.com>) escribió: > >> On 12/11/2018 04:36 PM, Carlos Alberto Ruiz Naranjo via USRP-users wrote: >> > Hello, >> > >> > I have found a USRP1 and I am playing with it. I have this error: >> > >> > carlos@carlos-pc:~$ sudo uhd_usrp_probe --args="type=usrp1" >> > [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; >> > UHD_4.0.0.rfnoc-devel-702-geec24d7b >> > [INFO] [USRP1] Opening a USRP1 device... >> > [INFO] [USRP1] Using FPGA clock rate of 64.000000MHz... >> > [ERROR] [DBMGR] The daughterboard manager encountered a recoverable >> > error in init. >> > Loading the "unknown" daughterboard implementations to continue. >> > The daughterboard cannot operate until this error is resolved. >> > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 >> > in double dbsrx::set_lo_freq(double) >> > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 >> > >> > _____________________________________________________ >> > / >> > | Device: USRP1 Device >> > | _____________________________________________________ >> > | / >> > | | Mboard: USRP1 >> > | | serial: 479b9db3 >> > | | >> > | | Time sources: none >> > | | Clock sources: internal >> > | | Sensors: >> > | | _____________________________________________________ >> > | | / >> > | | | RX DSP: 0 >> > | | | >> > | | | Freq range: -32.000 to 32.000 MHz >> > | | _____________________________________________________ >> > | | / >> > | | | RX DSP: 1 >> > | | | >> > | | | Freq range: -32.000 to 32.000 MHz >> > | | _____________________________________________________ >> > | | / >> > | | | RX Dboard: A >> > | | | ID: DBSRX (0x0002) >> > | | | _____________________________________________________ >> > | | | / >> > | | | | RX Frontend: 0 >> > | | | | Name: Unknown (0xffff) - 0 >> > | | | | Antennas: >> > | | | | Sensors: >> > | | | | Freq range: 0.000 to 0.000 MHz >> > | | | | Gain Elements: None >> > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz >> > | | | | Connection Type: IQ >> > | | | | Uses LO offset: No >> > | | | _____________________________________________________ >> > | | | / >> > | | | | RX Codec: A >> > | | | | Name: ad9522 >> > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB >> > | | _____________________________________________________ >> > | | / >> > | | | RX Dboard: B >> > | | | _____________________________________________________ >> > | | | / >> > | | | | RX Frontend: 0 >> > | | | | Name: Unknown (0xffff) - 0 >> > | | | | Antennas: >> > | | | | Sensors: >> > | | | | Freq range: 0.000 to 0.000 MHz >> > | | | | Gain Elements: None >> > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz >> > | | | | Connection Type: IQ >> > | | | | Uses LO offset: No >> > | | | _____________________________________________________ >> > | | | / >> > | | | | RX Codec: B >> > | | | | Name: ad9522 >> > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB >> > | | _____________________________________________________ >> > | | / >> > | | | TX DSP: 0 >> > | | | >> > | | | Freq range: -44.000 to 44.000 MHz >> > | | _____________________________________________________ >> > | | / >> > | | | TX DSP: 1 >> > | | | >> > | | | Freq range: -44.000 to 44.000 MHz >> > | | _____________________________________________________ >> > | | / >> > | | | TX Dboard: A >> > | | | _____________________________________________________ >> > | | | / >> > | | | | TX Frontend: 0 >> > | | | | Name: Unknown (0xffff) - 0 >> > | | | | Antennas: >> > | | | | Sensors: >> > | | | | Freq range: 0.000 to 0.000 MHz >> > | | | | Gain Elements: None >> > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz >> > | | | | Connection Type: IQ >> > | | | | Uses LO offset: No >> > | | | _____________________________________________________ >> > | | | / >> > | | | | TX Codec: A >> > | | | | Name: ad9522 >> > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB >> > | | _____________________________________________________ >> > | | / >> > | | | TX Dboard: B >> > | | | _____________________________________________________ >> > | | | / >> > | | | | TX Frontend: 0 >> > | | | | Name: Unknown (0xffff) - 0 >> > | | | | Antennas: >> > | | | | Sensors: >> > | | | | Freq range: 0.000 to 0.000 MHz >> > | | | | Gain Elements: None >> > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz >> > | | | | Connection Type: IQ >> > | | | | Uses LO offset: No >> > | | | _____________________________________________________ >> > | | | / >> > | | | | TX Codec: B >> > | | | | Name: ad9522 >> > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB >> > >> > And the same in GNURadio: >> > >> > Executing: /usr/bin/python2 -u /home/carlos/top_block.py >> > >> > [32;1m[INFO] [UHD] [39;0mlinux; GNU C++ version 7.3.0; Boost_106501; >> > UHD_4.0.0.rfnoc-devel-702-geec24d7b >> > [32;1m[INFO] [USRP1] [39;0mOpening a USRP1 device... >> > [32;1m[INFO] [USRP1] [39;0mUsing FPGA clock rate of 64.000000MHz... >> > [31;0m[ERROR] [DBMGR] [39;0mThe daughterboard manager encountered a >> > recoverable error in init. >> > Loading the "unknown" daughterboard implementations to continue. >> > The daughterboard cannot operate until this error is resolved. >> > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 >> > in double dbsrx::set_lo_freq(double) >> > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 >> > >> > [33;1m[WARNING] [MULTI_USRP] [39;0mSetting IQ imbalance compensation >> > is not possible on this device. >> > INFO: Audio sink arch: alsa >> > aUaU >> > >> > >> Try an older release of UHD--does that help? >> >> The DBSRX is ceftainly supported, and if support has gone away, that's >> not design intent as far as I know. >> >> Although, I must point out that the DBSRX was EOLed in favor of the >> DBSRX2 nearly a decade ago, and the USRP1 is itself EOLed... >> >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
