Hi Marcus, I have changed the version to UHD-3.9.LTS. With *uhd_usrp_probe --args="type=usrp1" *I haven't erros. But I don't know why the GNURadio version hasn't changed... I have, with the previous errors :
* GNU C++ version 7.3.0; Boost_106501; UHD_4.0.0.rfnoc-devel-702-* *geec24d7b* Any idea? Thank you. El mar., 11 dic. 2018 a las 22:42, Marcus D. Leech via USRP-users (< usrp-users@lists.ettus.com>) escribió: > On 12/11/2018 04:36 PM, Carlos Alberto Ruiz Naranjo via USRP-users wrote: > > Hello, > > > > I have found a USRP1 and I am playing with it. I have this error: > > > > carlos@carlos-pc:~$ sudo uhd_usrp_probe --args="type=usrp1" > > [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; > > UHD_4.0.0.rfnoc-devel-702-geec24d7b > > [INFO] [USRP1] Opening a USRP1 device... > > [INFO] [USRP1] Using FPGA clock rate of 64.000000MHz... > > [ERROR] [DBMGR] The daughterboard manager encountered a recoverable > > error in init. > > Loading the "unknown" daughterboard implementations to continue. > > The daughterboard cannot operate until this error is resolved. > > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 > > in double dbsrx::set_lo_freq(double) > > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 > > > > _____________________________________________________ > > / > > | Device: USRP1 Device > > | _____________________________________________________ > > | / > > | | Mboard: USRP1 > > | | serial: 479b9db3 > > | | > > | | Time sources: none > > | | Clock sources: internal > > | | Sensors: > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 0 > > | | | > > | | | Freq range: -32.000 to 32.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 1 > > | | | > > | | | Freq range: -32.000 to 32.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | ID: DBSRX (0x0002) > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: Unknown (0xffff) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: ad9522 > > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: B > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: Unknown (0xffff) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: B > > | | | | Name: ad9522 > > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 0 > > | | | > > | | | Freq range: -44.000 to 44.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 1 > > | | | > > | | | Freq range: -44.000 to 44.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: Unknown (0xffff) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: ad9522 > > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: B > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: Unknown (0xffff) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: B > > | | | | Name: ad9522 > > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB > > > > And the same in GNURadio: > > > > Executing: /usr/bin/python2 -u /home/carlos/top_block.py > > > > [32;1m[INFO] [UHD] [39;0mlinux; GNU C++ version 7.3.0; Boost_106501; > > UHD_4.0.0.rfnoc-devel-702-geec24d7b > > [32;1m[INFO] [USRP1] [39;0mOpening a USRP1 device... > > [32;1m[INFO] [USRP1] [39;0mUsing FPGA clock rate of 64.000000MHz... > > [31;0m[ERROR] [DBMGR] [39;0mThe daughterboard manager encountered a > > recoverable error in init. > > Loading the "unknown" daughterboard implementations to continue. > > The daughterboard cannot operate until this error is resolved. > > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 > > in double dbsrx::set_lo_freq(double) > > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 > > > > [33;1m[WARNING] [MULTI_USRP] [39;0mSetting IQ imbalance compensation > > is not possible on this device. > > INFO: Audio sink arch: alsa > > aUaU > > > > > Try an older release of UHD--does that help? > > The DBSRX is ceftainly supported, and if support has gone away, that's > not design intent as far as I know. > > Although, I must point out that the DBSRX was EOLed in favor of the > DBSRX2 nearly a decade ago, and the USRP1 is itself EOLed... > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
