You may have multiple versions of GNU Radio and/or UHD libraries still installed on your PC. Try navigating to the wherever you installed them (e.g., /usr/local/lib) and deleting the ones you don’t want by hand.
Robin Coxe | Chief R&D Program Manager, SDR | Santa Clara, CA | 408.610.6363 ________________________________ From: USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of Carlos Alberto Ruiz Naranjo via USRP-users <usrp-users@lists.ettus.com> Sent: Wednesday, December 12, 2018 4:17 AM To: patchvonbr...@gmail.com Cc: USRP-users@lists.ettus.com Subject: Re: [USRP-users] USRP1 support: "unknown" daughterboard Hi Marcus, I have changed the version to UHD-3.9.LTS. With uhd_usrp_probe --args="type=usrp1" I haven't erros. But I don't know why the GNURadio version hasn't changed... I have, with the previous errors : GNU C++ version 7.3.0; Boost_106501; UHD_4.0.0.rfnoc-devel-702-geec24d7b Any idea? Thank you. El mar., 11 dic. 2018 a las 22:42, Marcus D. Leech via USRP-users (<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>>) escribió: On 12/11/2018 04:36 PM, Carlos Alberto Ruiz Naranjo via USRP-users wrote: > Hello, > > I have found a USRP1 and I am playing with it. I have this error: > > carlos@carlos-pc:~$ sudo uhd_usrp_probe --args="type=usrp1" > [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; > UHD_4.0.0.rfnoc-devel-702-geec24d7b > [INFO] [USRP1] Opening a USRP1 device... > [INFO] [USRP1] Using FPGA clock rate of 64.000000MHz... > [ERROR] [DBMGR] The daughterboard manager encountered a recoverable > error in init. > Loading the "unknown" daughterboard implementations to continue. > The daughterboard cannot operate until this error is resolved. > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 > in double dbsrx::set_lo_freq(double) > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 > > _____________________________________________________ > / > | Device: USRP1 Device > | _____________________________________________________ > | / > | | Mboard: USRP1 > | | serial: 479b9db3 > | | > | | Time sources: none > | | Clock sources: internal > | | Sensors: > | | _____________________________________________________ > | | / > | | | RX DSP: 0 > | | | > | | | Freq range: -32.000 to 32.000 MHz > | | _____________________________________________________ > | | / > | | | RX DSP: 1 > | | | > | | | Freq range: -32.000 to 32.000 MHz > | | _____________________________________________________ > | | / > | | | RX Dboard: A > | | | ID: DBSRX (0x0002) > | | | _____________________________________________________ > | | | / > | | | | RX Frontend: 0 > | | | | Name: Unknown (0xffff) - 0 > | | | | Antennas: > | | | | Sensors: > | | | | Freq range: 0.000 to 0.000 MHz > | | | | Gain Elements: None > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > | | | | Connection Type: IQ > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | RX Codec: A > | | | | Name: ad9522 > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB > | | _____________________________________________________ > | | / > | | | RX Dboard: B > | | | _____________________________________________________ > | | | / > | | | | RX Frontend: 0 > | | | | Name: Unknown (0xffff) - 0 > | | | | Antennas: > | | | | Sensors: > | | | | Freq range: 0.000 to 0.000 MHz > | | | | Gain Elements: None > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > | | | | Connection Type: IQ > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | RX Codec: B > | | | | Name: ad9522 > | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB > | | _____________________________________________________ > | | / > | | | TX DSP: 0 > | | | > | | | Freq range: -44.000 to 44.000 MHz > | | _____________________________________________________ > | | / > | | | TX DSP: 1 > | | | > | | | Freq range: -44.000 to 44.000 MHz > | | _____________________________________________________ > | | / > | | | TX Dboard: A > | | | _____________________________________________________ > | | | / > | | | | TX Frontend: 0 > | | | | Name: Unknown (0xffff) - 0 > | | | | Antennas: > | | | | Sensors: > | | | | Freq range: 0.000 to 0.000 MHz > | | | | Gain Elements: None > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > | | | | Connection Type: IQ > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | TX Codec: A > | | | | Name: ad9522 > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB > | | _____________________________________________________ > | | / > | | | TX Dboard: B > | | | _____________________________________________________ > | | | / > | | | | TX Frontend: 0 > | | | | Name: Unknown (0xffff) - 0 > | | | | Antennas: > | | | | Sensors: > | | | | Freq range: 0.000 to 0.000 MHz > | | | | Gain Elements: None > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > | | | | Connection Type: IQ > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | TX Codec: B > | | | | Name: ad9522 > | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB > > And the same in GNURadio: > > Executing: /usr/bin/python2 -u /home/carlos/top_block.py > > [32;1m[INFO] [UHD] [39;0mlinux; GNU C++ version 7.3.0; Boost_106501; > UHD_4.0.0.rfnoc-devel-702-geec24d7b > [32;1m[INFO] [USRP1] [39;0mOpening a USRP1 device... > [32;1m[INFO] [USRP1] [39;0mUsing FPGA clock rate of 64.000000MHz... > [31;0m[ERROR] [DBMGR] [39;0mThe daughterboard manager encountered a > recoverable error in init. > Loading the "unknown" daughterboard implementations to continue. > The daughterboard cannot operate until this error is resolved. > AssertionError: m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6 > in double dbsrx::set_lo_freq(double) > at /home/carlos/rfnoc/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:305 > > [33;1m[WARNING] [MULTI_USRP] [39;0mSetting IQ imbalance compensation > is not possible on this device. > INFO: Audio sink arch: alsa > aUaU > > Try an older release of UHD--does that help? The DBSRX is ceftainly supported, and if support has gone away, that's not design intent as far as I know. Although, I must point out that the DBSRX was EOLed in favor of the DBSRX2 nearly a decade ago, and the USRP1 is itself EOLed... _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
