Well if the phase difference is constant then i can manage it, but if it is
random then I have a problem?
From: Marcus D. Leech via USRP-users <usrp-users@lists.ettus.com>
To: usrp-users@lists.ettus.com
Sent: Monday, 8 October 2018 8:15 PM
Subject: Re: [USRP-users] two B205 mini radios synchronization
On 10/08/2018 04:39 AM, Arun kumar Verma via USRP-users wrote:
Hi
Well i want to synchronize two B205 mini radios with PPS and 10MHz external
clock. Since only one Ref input port is available, is it possible to combine to
signal and give it to Ref input or in B205 both synchronization not at all
possible?
Regards, Arun
The REF port on the B205 detects whether you're giving it 10MHz or 1PPS, and
uses that to drive an internal clock servo that controls the
on-board master clock.
Unfortunately, due to the way that servo works (it's a DPLL), you cannot
achieve tight phase synchronization between two or more B205s.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
