Is it important to have PPS signal aligned with reference 10 MHz signal. In
my case they come from different sources.

thanks,
Dmitry?

пн, 18 июн. 2018 г. в 17:37, Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com>:

> On 06/18/2018 10:28 AM, Дмитрий Михайличенко via USRP-users wrote:
>
> The frequency is around 600 MHz. I also tried higher frequencies. The
> offset is visible on picture attached.
>
> thanks,
> Dmitry
>
> If you look here:
>
> https://kb.ettus.com/UBX
>
> You can see that for frequencies below 1GHz, you have to use a 20MHz
> daughterboard clock for UBX to achieve synchronization.
>   I don't know if SBX will work correctly with a 20MHz daughterboard
> clock, so you can't have "mixed" UBX + SBX on the same
>   X310.
>
> Also, integer-N tuning can help maintain better phase synchronization
> characteristics:
>
> https://files.ettus.com/manual/structuhd_1_1tune__request__t.html
>
>
> пн, 18 июн. 2018 г. в 14:50, Дмитрий Михайличенко <mdm...@gmail.com>:
>
>> Hi,
>>
>> I have a couple of X310 each of them has UBX+SBX cards. The devices are
>> synchronized by external 10MHz + PPS signal. But in my test I see random
>> phase delay between all channels that varies between test runs. The test
>> creates multi usrp device, sets up time and tunes to the same frequency
>> using timed command, then it captures some buffers. The same external
>> signal is supplied to all antenna ports. Is it expected to have random
>> delay between channels? Is there any way to have constant phase delay from
>> run to run?
>>
>> thanks,
>> Dmitry
>>
>
>
> _______________________________________________
> USRP-users mailing 
> listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
  • [USRP-users] two X3... Дмитрий Михайличенко via USRP-users
    • Re: [USRP-user... Marcus D. Leech via USRP-users
    • Re: [USRP-user... Дмитрий Михайличенко via USRP-users
      • Re: [USRP-... Marcus D. Leech via USRP-users
        • Re: [U... Дмитрий Михайличенко via USRP-users
          • Re... Marcus D. Leech via USRP-users
            • ... Daniel Jepson via USRP-users
              • ... Marcus D. Leech via USRP-users
                • ... Ian Buckley via USRP-users
          • Re... Marcus D. Leech via USRP-users
            • ... Дмитрий Михайличенко via USRP-users
              • ... Ian Buckley via USRP-users
                • ... Дмитрий Михайличенко via USRP-users
                • ... Ian Buckley via USRP-users
                • ... Дмитрий Михайличенко via USRP-users

Reply via email to