Hi Michael, I see new commits have been entered in the uhd maint branch in the last couple days. Were any related to this issue?
Andrew On Mon, Apr 23, 2018 at 11:12 AM, Michael West <michael.w...@ettus.com> wrote: > Hi Louis/Andrew, > > The root cause of the issue has been identified and a fix is in progress. > We should have the fix available on the head of the maint branch very > soon. Thank you for bringing it to our attention! > > Regards, > Michael > > On Fri, Apr 20, 2018 at 8:54 AM, switchlanez via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> I have an issue that may be related. Using LFTX and LFRX boards in an >> X310, anytime I use the RFNoC Radio block in Rx mode the run terminates >> with: >> >> terminate called after throwing an instance of 'std::out_of_range' >> what(): map::at >> >> Following for updates. >> >> Andrew >> >> >> On Thu, Apr 19, 2018 at 9:54 AM, Neel Pandeya via USRP-users < >> usrp-users@lists.ettus.com> wrote: >> >>> Hello Louis: >>> >>> Thanks for the detailed feedback. We have reproduced this issue, and are >>> debugging it now. We will get back to you and post an update shortly. >>> >>> --​Neel Pandeya >>> >>> >>> >>> >>> On 12 April 2018 at 18:46, Louis Brown via USRP-users < >>> usrp-users@lists.ettus.com> wrote: >>> >>>> Could it be something to do with this commit for address offsets? >>>> >>>> https://github.com/EttusResearch/uhd/commit/8ee22529f33a63c2 >>>> 064b0dc6fbcc04c2ded94b4a >>>> >>>> Lou >>>> >>>> >>>> On Apr 12, 2018, at 16:38, Louis Brown <rfeng...@me.com> wrote: >>>> >>>> >>>> Did something change with respect to daughter board addressing in UHD >>>> 3.11? >>>> I have an X310 with LFTX and LFRX in motherboard slot A. >>>> When I run benchmark_rate it core dumps as follows: >>>> >>>> /* >>>> [/usr/local/lib64/uhd/examples]$ ./benchmark_rate --args >>>> "addr=192.168.40.2" --tx_rate=10E6 >>>> >>>> [INFO] [UHD] linux; GNU C++ version 7.3.1 20180303 (Red Hat 7.3.1-5); >>>> Boost_106400; UHD_3.11.0.1-0-unknown >>>> [00:00:00.000006] Creating the usrp device with: addr=192.168.40.2... >>>> [INFO] [X300] X300 initialization sequence... >>>> [INFO] [X300] Determining maximum frame size... >>>> [INFO] [X300] Maximum frame size: 8000 bytes. >>>> [INFO] [X300] Setup basic communication... >>>> [INFO] [X300] Loading values from EEPROM... >>>> [INFO] [X300] Setup RF frontend clocking... >>>> [INFO] [X300] Radio 1x clock:200 >>>> [INFO] [RFNOC DMA FIFO] Running BIST for FIFO 0... >>>> [INFO] [RFNOC DMA FIFO] BIST passed (Throughput: 1299 MB/s) >>>> [INFO] [RFNOC DMA FIFO] Running BIST for FIFO 1... >>>> [INFO] [RFNOC DMA FIFO] BIST passed (Throughput: 1302 MB/s) >>>> [WARNING] [RFNOC] [0/Radio_0] defines 2 input buffer sizes, but 1 input >>>> ports >>>> [INFO] [RFNOC RADIO] Register loopback test passed >>>> [INFO] [RFNOC RADIO] Register loopback test passed >>>> [WARNING] [RFNOC] [0/Radio_1] defines 2 input buffer sizes, but 1 input >>>> ports >>>> [INFO] [RFNOC RADIO] Register loopback test passed >>>> [INFO] [RFNOC RADIO] Register loopback test passed >>>> [INFO] [CORES] Performing timer loopback test... >>>> [INFO] [CORES] Timer loopback test passed >>>> [INFO] [CORES] Performing timer loopback test... >>>> [INFO] [CORES] Timer loopback test passed >>>> Using Device: Single USRP: >>>> Device: X-Series Device >>>> Mboard 0: X310 >>>> RX Channel: 0 >>>> RX DSP: 0 >>>> RX Dboard: A >>>> RX Subdev: LFRX (AB) >>>> RX Channel: 1 >>>> RX DSP: 0 >>>> RX Dboard: B >>>> RX Subdev: Unknown (0xffff) - 0 >>>> TX Channel: 0 >>>> TX DSP: 0 >>>> TX Dboard: A >>>> TX Subdev: LFTX (AB) >>>> TX Channel: 1 >>>> TX DSP: 0 >>>> TX Dboard: B >>>> TX Subdev: Unknown (0xffff) - 0 >>>> >>>> [00:00:02.623786] Setting device timestamp to 0... >>>> terminate called after throwing an instance of 'std::out_of_range' >>>> what(): map::at >>>> Aborted (core dumped) >>>> */ >>>> >>>> >>>> If I specify tx_channels "1" it runs, lighting up the slot B TX/RX LED, >>>> or course I have no boards installed there. >>>> >>>> /* >>>> [/usr/local/lib64/uhd/examples]$ ./benchmark_rate --args >>>> "addr=192.168.40.2" --tx_rate=100E6 --tx_channels "1" >>>> */ >>>> >>>> If I specify tx_channels "0" it core dumps with the same >>>> std::out_of_range >>>> >>>> Flow graphs that ran in UHD 3.10 with sub-device "A:AB" no longer run: >>>> >>>> /* >>>> [INFO] [CORES] Timer loopback test passed >>>> terminate called after throwing an instance of 'std::out_of_range' >>>> what(): map::at >>>> */ >>>> >>>> If I try benchmark_rate with another X310 with the UBX card in slot A, >>>> things work fine. So maybe it's specific to the use of LF cards with UHD >>>> 3.11. >>>> >>>> Thanks, >>>> Lou >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> USRP-users mailing list >>>> USRP-users@lists.ettus.com >>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>>> >>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >>> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
