My python script used to setup the gain, frequency, number of channels, sampling freq, etc. no longer works as it did with the version 1 daughtercards, and I am trying to understand why. The only difference is the new version 2 daughtercards.
From: Neel Pandeya <neel.pand...@ettus.com> Date: Thursday, October 26, 2017 at 2:49 PM To: Mark Koenig <mark.koe...@iubelttechnologies.com> Cc: Nate Temple <nate.tem...@ettus.com>, "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] UBX-160 with X310 communication issue Hello Mark: We do not have any document listing the changes between the hardware revisions of the UBX, but they do not fundamentally affect the operation or capabilities of the device. Could you please elaborate on what you mean by "communication anomalies", and describe the issue in detail? Thanks! --​Neel Pandeya On 26 October 2017 at 10:25, Mark Koenig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Hi Nate, just following up on this. Thank you Mark From: Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> Date: Thursday, October 19, 2017 at 12:30 PM To: Nate Temple <nate.tem...@ettus.com<mailto:nate.tem...@ettus.com>> Cc: "usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>" <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] UBX-160 with X310 communication issue Nate, There seems to be a number of differences between the UBX-40 v1, UBX-40 v2 and UBX-160 v1, UBX-160 v2. Is there any documentation describing the difference between the v1 and v2 daughtercards? I am also noticing some communication anomalies when using the v2 daugtercard. Thank you Mark From: Nate Temple <nate.tem...@ettus.com<mailto:nate.tem...@ettus.com>> Date: Tuesday, October 17, 2017 at 5:19 PM To: Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> Cc: "usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>" <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] UBX-160 with X310 communication issue Hi Mark, The UBX v2 is not supported using UHD 3.9.3. Support for the UBX v2 was added with UHD 3.9.5 and UHD 3.10.2.0. Can you please try updating to the newest UHD, such as 3.9.7 or 3.10.2.0 and try probing USRP/DBs again? Regards, Nate Temple On Tue, Oct 17, 2017 at 1:01 PM, Mark Koenig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Hello, I am looking for some help with respect to the UBX-160. I have two version 2 daughtercards which were purchased a couple of months ago. I am running on CentOS 7.2 and CentOS 6.5 with GNU radio version 3.7.4 and UHD version 003.009.003. I can ping the USRP and also return information on the uhd_find_devices command, however, when I run the uhd_usrp_probe command I do not get a return for the daughtercards. The example output is below. Any help would be EXTREMELY appreciated. Thank you Mark linux; GNU C++ version 4.4.7 20120313 (Red Hat 4.4.7-16); Boost_105300; UHD_003.009.004-0-g2b5a88bb -- X300 initialization sequence... -- Determining maximum frame size... 1472 bytes. -- Setup basic communication... -- Loading values from EEPROM... -- Setup RF frontend clocking... -- Radio 1x clock:200 -- Detecting internal GPSDO.... Found an internal GPSDO -- Initialize Radio0 control... -- Performing register loopback test... pass -- Initialize Radio1 control... -- Performing register loopback test... pass _____________________________________________________ / | Device: X-Series Device | _____________________________________________________ | / | | Mboard: X310 | | revision: 11 | | revision_compat: 7 | | product: 30818 | | mac-addr0: 00:80:2f:17:43:3f | | mac-addr1: 00:80:2f:17:43:40 | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 311FF4E | | FW Version: 4.0 | | FPGA Version: 19.0 | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, ref_locked | | _____________________________________________________ | | / | | | RX DSP: 0 | | | Freq range: -100.000 to 100.000 MHz | | _____________________________________________________ | | / | | | RX DSP: 1 | | | Freq range: -100.000 to 100.000 MHz | | _____________________________________________________ | | / | | | RX Dboard: A | | | ID: Unknown (0x007e) | | | Serial: 3120D56 | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: Unknown (0x007e) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz | | | | Gain Elements: None | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _____________________________________________________ | | / | | | RX Dboard: B | | | ID: Unknown (0x007e) | | | Serial: 3120D4A | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: Unknown (0x007e) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz | | | | Gain Elements: None | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: B | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _____________________________________________________ | | / | | | TX DSP: 0 | | | Freq range: -100.000 to 100.000 MHz | | _____________________________________________________ | | / | | | TX DSP: 1 | | | Freq range: -100.000 to 100.000 MHz | | _____________________________________________________ | | / | | | TX Dboard: A | | | ID: Unknown (0x007d) | | | Serial: 3120D56 | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: Unknown (0x007d) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz | | | | Gain Elements: None | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: ad9146 | | | | Gain Elements: None | | _____________________________________________________ | | / | | | TX Dboard: B | | | ID: Unknown (0x007d) | | | Serial: 3120D4A | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: Unknown (0x007d) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz | | | | Gain Elements: None | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: B | | | | Name: ad9146 _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
