Hello Mark: We do not have any document listing the changes between the hardware revisions of the UBX, but they do not fundamentally affect the operation or capabilities of the device.
Could you please elaborate on what you mean by "communication anomalies", and describe the issue in detail? Thanks! --​Neel Pandeya On 26 October 2017 at 10:25, Mark Koenig via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi Nate, just following up on this. > > > > Thank you > > > > Mark > > > > *From: *Mark Koenig <mark.koe...@iubelttechnologies.com> > *Date: *Thursday, October 19, 2017 at 12:30 PM > *To: *Nate Temple <nate.tem...@ettus.com> > > *Cc: *"usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> > *Subject: *Re: [USRP-users] UBX-160 with X310 communication issue > > > > Nate, > > > > There seems to be a number of differences between the UBX-40 v1, UBX-40 v2 > and UBX-160 v1, UBX-160 v2. Is there any documentation describing the > difference between the v1 and v2 daughtercards? I am also noticing some > communication anomalies when using the v2 daugtercard. > > > > Thank you > > > > Mark > > > > *From: *Nate Temple <nate.tem...@ettus.com> > *Date: *Tuesday, October 17, 2017 at 5:19 PM > *To: *Mark Koenig <mark.koe...@iubelttechnologies.com> > *Cc: *"usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> > *Subject: *Re: [USRP-users] UBX-160 with X310 communication issue > > > > Hi Mark, > > > > The UBX v2 is not supported using UHD 3.9.3. Support for the UBX v2 was > added with UHD 3.9.5 and UHD 3.10.2.0. Can you please try updating to the > newest UHD, such as 3.9.7 or 3.10.2.0 and try probing USRP/DBs again? > > > > Regards, > > Nate Temple > > > > On Tue, Oct 17, 2017 at 1:01 PM, Mark Koenig via USRP-users < > usrp-users@lists.ettus.com> wrote: > > Hello, > > > > I am looking for some help with respect to the UBX-160. I have two > version 2 daughtercards which were purchased a couple of months ago. > > > > I am running on CentOS 7.2 and CentOS 6.5 with GNU radio version 3.7.4 and > UHD version 003.009.003. > > > > I can ping the USRP and also return information on the *uhd_find_devices* > command, however, when I run the *uhd_usrp_probe *command I do not get a > return for the daughtercards. The example output is below. > > > > Any help would be EXTREMELY appreciated. > > > > Thank you > > Mark > > > > linux; GNU C++ version 4.4.7 20120313 (Red Hat 4.4.7-16); Boost_105300; > UHD_003.009.004-0-g2b5a88bb > > > > -- X300 initialization sequence... > > -- Determining maximum frame size... 1472 bytes. > > -- Setup basic communication... > > -- Loading values from EEPROM... > > -- Setup RF frontend clocking... > > -- Radio 1x clock:200 > > -- Detecting internal GPSDO.... Found an internal GPSDO > > -- Initialize Radio0 control... > > -- Performing register loopback test... pass > > -- Initialize Radio1 control... > > -- Performing register loopback test... pass > > _____________________________________________________ > > / > > | Device: X-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: X310 > > | | revision: 11 > > | | revision_compat: 7 > > | | product: 30818 > > | | mac-addr0: 00:80:2f:17:43:3f > > | | mac-addr1: 00:80:2f:17:43:40 > > | | gateway: 192.168.10.1 > > | | ip-addr0: 192.168.10.2 > > | | subnet0: 255.255.255.0 > > | | ip-addr1: 192.168.20.2 > > | | subnet1: 255.255.255.0 > > | | ip-addr2: 192.168.30.2 > > | | subnet2: 255.255.255.0 > > | | ip-addr3: 192.168.40.2 > > | | subnet3: 255.255.255.0 > > | | serial: 311FF4E > > | | FW Version: 4.0 > > | | FPGA Version: 19.0 > > | | > > | | Time sources: internal, external, gpsdo > > | | Clock sources: internal, external, gpsdo > > | | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, > ref_locked > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 0 > > | | | Freq range: -100.000 to 100.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 1 > > | | | Freq range: -100.000 to 100.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | ID: Unknown (0x007e) > > | | | Serial: 3120D56 > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: Unknown (0x007e) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: ads62p48 > > | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: B > > | | | ID: Unknown (0x007e) > > | | | Serial: 3120D4A > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: Unknown (0x007e) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: B > > | | | | Name: ads62p48 > > | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 0 > > | | | Freq range: -100.000 to 100.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 1 > > | | | Freq range: -100.000 to 100.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | ID: Unknown (0x007d) > > | | | Serial: 3120D56 > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: Unknown (0x007d) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: ad9146 > > | | | | Gain Elements: None > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: B > > | | | ID: Unknown (0x007d) > > | | | Serial: 3120D4A > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: Unknown (0x007d) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: B > > | | | | Name: ad9146 > > > > > > > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
