Hello Jose,
please try running the following:
$ ./uhd_image_builder.py twochannelsiggen duc fft *-I
/home/joseavila/Documents/gnuradio_source/rfnoc-siggen2ch/* -d x310 -t
X310_RFNOC_HG -m 6 --fill-with-fifos
which means pointing to the top OOT directory instead to directly the
fpga-srcs directory. This small change was recently introduced and might be
the source of your issue. I just modified the guide accordingly.
Also, there is a possibility that you will face another path problem that
has already been fixed, but is yet to be pushed into the repository. To
avoid it, before running the uhd_image_builder, please go into the
uhd_image_builder.py file and modify the L239 from:
- curr_srcs = curr_srcs.replace('SOURCES_PATH',
os.path.join(oot_path, 'rfnoc', 'fpga-src'))
to:
+ curr_srcs = curr_srcs.replace('SOURCES_PATH',
os.path.join(oot_path, 'rfnoc', 'fpga-src', ''))
As said, this fix will be pushed soon, but for now you can avoid problems
by doing it manually.
Regards,
- Nicolas
On Tue, Oct 3, 2017 at 9:21 PM, Avila, Jose A via USRP-users <
usrp-users@lists.ettus.com> wrote:
> We are currently getting an error attempting to build a fpga image when
> running the following which points to the OOT module using the -I option
>
>
>
> *./uhd_image_builder.py twochannelsiggen duc fft -I
> /home/joseavila/Documents/gnuradio_source/rfnoc-siggen2ch/rfnoc/fpga-src/
> -d x310 -t X310_RFNOC_HG -m 6 --fill-with-fifos*
>
>
>
> The testbench ran successfully but now the image builder is giving an
> error saying module *noc_block_twochannelsiggen not found
> [.../top/x300/rfnoc_ce_auto_inst_x310.v]*
>
> twochannelsiggen is the OOT module created with rfnocmodtool in the
> rfnoc-siggen2ch directory. We tried editing the Makefile.OOT.inc in
> /…/top/x300 with the following two lines
>
>
>
> *OOT_DIR = /home/joseavila/Documents/gnuradio_source/rfnoc-siggen2ch/rfnoc*
>
> *include $(OOT_DIR)/Makefile.inc*
>
>
>
> As well as editing the subsequent makefiles in the OOT rfnoc directory. We
> did notice that the Makefile.OOT.inc would get erased after running the
> image builder and it erroring out. The following is the error
> encountered with the image builder
>
>
>
>
> Parameter my_addr bound to: 237 - type: integer
>
>
>
> Parameter awidth bound to: 8 - type: integer
>
>
>
> Parameter width bound to: 32 - type: integer
>
>
>
> Parameter at_reset bound to: 0 - type: integer
>
>
>
> INFO: [Synth 8-256] done synthesizing module
> 'setting_reg__parameterized18' (136#1) [/home/joseavila/Documents/
> gnuradio_source/fpga/usrp3/lib/control/setting_reg.v:12]
>
>
>
> INFO: [Synth 8-256] done synthesizing module 'rx_frontend_gen3' (137#1)
> [/home/joseavila/Documents/gnuradio_source/fpga/usrp3/
> lib/radio/rx_frontend_gen3.v:5]
>
>
>
> ERROR: [Synth 8-439] module 'noc_block_twochannelsiggen' not found
> [/home/joseavila/Documents/gnuradio_source/fpga/usrp3/
> top/x300/rfnoc_ce_auto_inst_x310.v:22]
>
>
>
> ERROR: [Synth 8-285] failed synthesizing module 'x300_core'
> [/home/joseavila/Documents/gnuradio_source/fpga/usrp3/
> top/x300/x300_core.v:2]
>
>
>
> ERROR: [Synth 8-285] failed synthesizing module 'x300'
> [/home/joseavila/Documents/gnuradio_source/fpga/usrp3/top/x300/x300.v:15]
>
>
>
> ------------------------------------------------------------
> ---------------------
>
>
>
> Finished RTL Elaboration : Time (s): cpu = 00:01:44 ; elapsed = 00:01:44 .
> Memory (MB): peak = 1351.676 ; gain = 517.594 ; free physical = 4123 ; free
> virtual = 14654
>
>
>
> ------------------------------------------------------------
> ---------------------
>
>
>
> RTL Elaboration failed
>
>
>
> INFO: [Common 17-83] Releasing license: Synthesis
>
>
>
> 552 Infos, 57 Warnings, 0 Critical Warnings and 4 Errors encountered.
>
>
>
> synth_design failed
>
>
>
> ERROR: [Common 17-69] Command failed: Synthesis failed - please see the
> console or run log file for details
>
>
>
> INFO: [Common 17-206] Exiting Vivado at Mon Oct 2 15:23:15 2017...
>
>
>
> make[1]: *** [bin] Error 1
>
>
>
> make[1]: Leaving directory `/home/joseavila/Documents/
> gnuradio_source/fpga/usrp3/top/x300'
>
>
>
> make: *** [X310_RFNOC_HG] Error 2
>
>
>
>
>
> Thank you
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
