Le 16/03/2018 à 20:52, stan a écrit : > On Fri, 16 Mar 2018 18:50:20 +0100 > François Patte <francois.pa...@mi.parisdescartes.fr> wrote: > >> Here is the link: >> >> http://www.alsa-project.org/db/?f=5ebae0714f190eceb8b6ff7ceb435f434d48ad85 > >>From that output, you should have sound. Your system put the PCM > (analog) card in the 0 slot, and that is the default location for sound > to be routed to pulseaudio. Do you by chance have a configuration file > for sound in Nothing that assigns a default device other than 0?
Thank you for helping. Nothing in /etc/modprobe.d But in /usr/lib/modprobe.d/ I have a dist-alsa.conf file with: # ALSA Sound Support # # We want to ensure that snd-seq is always loaded for those who want to use # the sequencer interface, but we can't do this automatically through udev # at the moment...so we have this rule (just for the moment). # # Remove the following line if you don't want the sequencer. install snd-pcm /sbin/modprobe --ignore-install snd-pcm && /sbin/modprobe snd-seq Don't know what it means.... > > You could also do a > man pulse-client.conf > and check the locations at the top of that to see if you have a pulse > configuration file that is overriding your settings via the gui. > Especially in your home directory. > > Also in ~/.config/pulse there should be a file with []-default-source. > Look at that to be sure that it is pointing to device 0, and analog. In ~/.config/pulse I have: bd9a117e29a44dd4b335896e866a41d2-default-sink bd9a117e29a44dd4b335896e866a41d2-default-source Which are empty when I log-in (in that case the config is: "sortie stéréo numérique (iec958) + entrée stéréo analogique" which does not work, no sound) If I change, in the config tab, to duplex stéréo analogique (which works) and going to the "output peripheric" tab and press the button "define as alternative" these two files in ~/.config/pulse, have alsa_input.pci-0000_00_1b.0.analog-stereo inside, but these files are erased at next login/boot. > It doesn't make sense that you don't have sound. What could erase the files source/sink in my ~/.config/pulse and why does the fedora default config does not follow the man pulse-client.conf for, according to this manual, there should be a ~/.config/pulse/client.conf file or ~/.config/pulse/client.conf.d/*.conf files... Regards -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte
signature.asc
Description: OpenPGP digital signature
_______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
