Hi Spamaden, I already have it installed. If you look at the error, it says kannel version is 1.5. This is the command I am running when compiling opensmppbox the is contained in the folder /addons/opensmppbox: ./configure --prefix=/etc/kannel --with-kannel-dir=/etc/kannel/sbin
This is my connection status: Kannel bearerbox version `1.5.0'. Build `May 3 2014 10:19:06', compiler `4.6.3'. System Linux, release 3.2.0-31-generic, version #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012, machine x86_64. Hostname rzpeiz52m2, IP . Libxml version 2.7.8. Using native malloc. Status: running, uptime 1d 6h 23m 14s WDP: received 0 (0 queued), sent 0 (0 queued) SMS: received 0 (0 queued), sent 0 (0 queued), store size -1 SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) msg/sec DLR: received 0, sent 0 DLR: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) msg/sec DLR: 0 queued, using internal storage No boxes connected -- But still getting error. Any ideas? On Sun, May 4, 2014 at 7:07 PM, spameden <spame...@gmail.com> wrote: > > > > 2014-05-04 16:58 GMT+04:00 MOSES KARIUKI <kariuk...@gmail.com>: > > I have tried it. I keep getting this error: >> >> checking for Ct-Lib support... no >> checking for FreeTDS Ct-Lib support... no >> checking for gw-config... /etc/kannel/bin/gw-config >> checking Kannel version... 1.5.0 >> checking Kannel libs... -L/etc/kannel/lib/kannel -lgw -lwap -lgwlib -lpq >> -lrt -lresolv -lnsl -lm -lpthread -L/usr/lib/x86_64-linux-gnu -lxml2 >> -L/usr/lib >> checking Kannel includes... -I/etc/kannel/include/kannel -g -O2 >> -D_XOPEN_SOURCE=600 -D_BSD_SOURCE -D_LARGE_FILES= -I/usr/include/libxml2 >> -I/usr/include/postgresql >> checking for cfg_create in -lgwlib... no >> > > > >> configure: error: Kannel gwlib is required! >> > > Install kannel before compiling sqlbox/opensmmpbox. > > > >> >> What do I do now? >> >> >> On Sun, May 4, 2014 at 9:23 AM, Saurabh Pandey < >> sam.it.develo...@gmail.com> wrote: >> >>> The file opensmppbox.c has errors. Use the default opensmppbox pkg which >>> came with the Kannel. You can find that in the same folder: >>> >>> *gateway-1.5.0/addons/opensmppbox* >>> >>> >>> On Sat, May 3, 2014 at 3:17 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>> >>>> Thanks a lot Sam, >>>> >>>> I followed your instructions, and it complied without errors using >>>> PGSQL. >>>> I now want to configure opensmppbox. However, when i compile using the >>>> command >>>> *./configure --prefix=/usr/local/kannel >>>> --with-kannel-dir=/usr/local/kannel* >>>> Downloaded from: >>>> *./configure --prefix=/usr/local/kannel >>>> --with-kannel-dir=/usr/local/kannel* >>>> This is the error I am getting. >>>> exit 1; f i >>>> opensmppbox.c: In function ‘send_pdu’: >>>> opensmppbox.c:622:5: warning: passing argument 1 of ‘smpp_pdu_dump’ >>>> from incompatible pointer type [enabled by d efault] >>>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >>>> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >>>> opensmppbox.c:622:5: error: too many arguments to function >>>> ‘smpp_pdu_dump’ >>>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >>>> opensmppbox.c: In function ‘handle_pdu’: >>>> opensmppbox.c:1513:2: warning: passing argument 1 of ‘smpp_pdu_dump’ >>>> from incompatible pointer type [enabled by default] >>>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >>>> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >>>> opensmppbox.c:1513:2: error: too many arguments to function >>>> ‘smpp_pdu_dump’ >>>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >>>> opensmppbox.c: In function ‘run_smppbox’: >>>> opensmppbox.c:2099:10: warning: cast from pointer to integer of >>>> different size [-Wpointer-to-int-cast] >>>> opensmppbox.c: In function ‘wait_for_connections’: >>>> opensmppbox.c:2156:10: warning: cast to pointer from integer of >>>> different size [-Wint-to-pointer-cast] >>>> opensmppbox.c: In function ‘smppboxc_run’: >>>> opensmppbox.c:2171:12: warning: cast from pointer to integer of >>>> different size [-Wpointer-to-int-cast] >>>> opensmppbox.c: In function ‘check_login’: >>>> opensmppbox.c:288:9: warning: ignoring return value of ‘fscanf’, >>>> declared with attribute warn_unused_result [-Wu nused-result] >>>> >>>> Thanks, >>>> MT >>>> >>>> >>>> >>>> >>>> On Sat, May 3, 2014 at 7:31 AM, Saurabh Pandey < >>>> sam.it.develo...@gmail.com> wrote: >>>> >>>>> Ok, start again from the begining. Remove all Kannel installations by >>>>> manually deleting files/binaries. Follow these steps exactly and you'd be >>>>> good to go: >>>>> >>>>> 1) download kannel pkg on server from redmine. Enter this command in >>>>> terminal >>>>> >>>>> >>>>> *mkdir /downloads* >>>>> >>>>> *cd /downloads* >>>>> >>>>> >>>>> *wget http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip >>>>> <http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip> * >>>>> 2) Unzip and install Kannel >>>>> >>>>> >>>>> *cd gateway-1.5.0/* >>>>> >>>>> *./configure --prefix=/usr/local/kannel --with-mysql >>>>> --with-mysql-dir=/usr/local/mysql* >>>>> >>>>> *make * >>>>> >>>>> >>>>> *make install* >>>>> 3) Write config file >>>>> >>>>> >>>>> *cd /usr/local/kannel/sbin/* >>>>> *vim kannel.conf *-- this will open editor and you can copy paste >>>>> conf from sample conf file provided in the pkg and edit according to your >>>>> needs >>>>> Esc+ :wq +Enter -- Save and exit editor >>>>> >>>>> 4) Start Kannel >>>>> Now since you've created conf file in the same directory as bearerbox >>>>> and smsbox you won't have to provide any paths. so simply enter >>>>> *./bearerbox, *press enter, close the terminal and in new terminal >>>>> session enter >>>>> >>>>> *./smsbox* >>>>> Now this must work for you. Also *"Broken Pipe"* error logged in your >>>>> logs means that the connection was broken which often times i've seen when >>>>> I'm working on my local system and I get disconnected from internet. So >>>>> you >>>>> might wanna look into that too. >>>>> >>>>> Let me know how it works out. >>>>> >>>>> Cheers >>>>> -Sam >>>>> >>>>> >>>>> On Fri, May 2, 2014 at 8:21 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>>> >>>>>> That's what is baffling me. I am unable to clear them. >>>>>> >>>>>> >>>>>> On Fri, May 2, 2014 at 5:49 PM, Otandeka Simon Peter < >>>>>> sotand...@gmail.com> wrote: >>>>>> >>>>>>> >>>>>>> You are almost there. Just clear out those errors and you are good >>>>>>> to. >>>>>>> >>>>>>> P. >>>>>>> >>>>>>> >>>>>>> @sotandeka >>>>>>> +256 716 801 124 >>>>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>>>> Systems. >>>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, May 2, 2014 at 5:45 PM, MOSES KARIUKI >>>>>>> <kariuk...@gmail.com>wrote: >>>>>>> >>>>>>>> Hi All, >>>>>>>> >>>>>>>> This is the bearer box log: >>>>>>>> >>>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Couldn't open logfile >>>>>>>> `/var/log/kannel/bearerbox.log'. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: System error 2: No such file >>>>>>>> or directory >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SSL not supported, no SSL >>>>>>>> initialization done. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: HTTP: Opening server at port >>>>>>>> 13000. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 1 >>>>>>>> (gwlib/fdset.c:poller) >>>>>>>> 2014-05-02 14:41:49 [1944] [1] DEBUG: Thread 1 >>>>>>>> (gwlib/fdset.c:poller) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 2 >>>>>>>> (gwlib/http.c:server_thread) >>>>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: Thread 2 >>>>>>>> (gwlib/http.c:server_thread) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [3] DEBUG: Thread 3 >>>>>>>> (gw/bb_http.c:httpadmin_run) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 3 >>>>>>>> (gw/bb_http.c:httpadmin_run) >>>>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: HTTP: Including port 13000, >>>>>>>> fd 8 for polling in server thread >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting smsbox connection >>>>>>>> module >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>>>>> set, using default (100). >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 4 >>>>>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>>>>> 2014-05-02 14:41:49 [1944] [4] DEBUG: Thread 4 >>>>>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 5 >>>>>>>> (gw/bb_boxc.c:smsboxc_run) >>>>>>>> 2014-05-02 14:41:49 [1944] [5] DEBUG: Thread 5 >>>>>>>> (gw/bb_boxc.c:smsboxc_run) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Set SMS resend frequency to 60 >>>>>>>> seconds. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SMS resend retry set to >>>>>>>> unlimited. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: MO concatenated message >>>>>>>> handling enabled >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: DLR rerouting for smsc id >>>>>>>> <congoairtel> disabled. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 6 >>>>>>>> (gw/smsc/smsc_smpp.c:io_thread) >>>>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Thread 6 >>>>>>>> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 7 >>>>>>>> (gw/bb_smscconn.c:sms_router) >>>>>>>> 2014-05-02 14:41:49 [1944] [7] DEBUG: Thread 7 >>>>>>>> (gw/bb_smscconn.c:sms_router) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting UDP sender/receiver >>>>>>>> module >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Adding interface * >>>>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Connecting to <217.113.71.81> >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>>>> 0.0.0.0:9200> >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 8 >>>>>>>> (gw/bb_udp.c:udp_receiver) >>>>>>>> 2014-05-02 14:41:49 [1944] [8] DEBUG: Thread 8 >>>>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 9 >>>>>>>> (gw/bb_udp.c:udp_sender) >>>>>>>> 2014-05-02 14:41:49 [1944] [9] DEBUG: Thread 9 >>>>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>>>> 0.0.0.0:9201> >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 10 >>>>>>>> (gw/bb_udp.c:udp_receiver) >>>>>>>> 2014-05-02 14:41:49 [1944] [10] DEBUG: Thread 10 >>>>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 11 >>>>>>>> (gw/bb_udp.c:udp_sender) >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting wapbox connection >>>>>>>> module >>>>>>>> 2014-05-02 14:41:49 [1944] [11] DEBUG: Thread 11 >>>>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Missing wapbox-port variable, >>>>>>>> cannot start WAP >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting WDP router >>>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 12 >>>>>>>> (gw/bearerbox.c:wdp_router) >>>>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: Thread 12 >>>>>>>> (gw/bearerbox.c:wdp_router) maps to pid 1944. >>>>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: udp_die: removing producers >>>>>>>> from udp-lists >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: >>>>>>>> ---------------------------------------- >>>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Kannel bearerbox II version >>>>>>>> svn-r5089 starting >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, May 2, 2014 at 5:36 PM, Otandeka Simon Peter < >>>>>>>> sotand...@gmail.com> wrote: >>>>>>>> >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> 1. Run bearerbox first before running smsbox.... something like >>>>>>>>> /usr/local/sbin/bearerbox -v 0 /etc/kannel.conf >>>>>>>>> /usr/local/sbin/smsbox -v 0 /etc/kannel.conf >>>>>>>>> 2. Send us the full log at debug-level zero >>>>>>>>> (/usr/local/sbin/bearerbox -v 0 /etc/kannel.conf) >>>>>>>>> 3. Check that you reach your SMSC at the given port and connection >>>>>>>>> is stable. >>>>>>>>> 4. Also check for file permissions. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> @sotandeka >>>>>>>>> +256 716 801 124 >>>>>>>>> Senior Programmer in VAS Mobile services, ERP, Health and >>>>>>>>> Web-based Systems. >>>>>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, May 2, 2014 at 5:11 PM, MOSES KARIUKI <kariuk...@gmail.com >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> Bendon, >>>>>>>>>> >>>>>>>>>> In Addition, these are the instructions I followed. >>>>>>>>>> >>>>>>>>>> svn co https://svn.kannel.org/gateway/trunk kannel-1.5 >>>>>>>>>> cd kannel-1.5 >>>>>>>>>> ./configure --with-mysql --prefix=/usr/local >>>>>>>>>> make >>>>>>>>>> make install >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Fri, May 2, 2014 at 5:10 PM, MOSES KARIUKI < >>>>>>>>>> kariuk...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> # >>>>>>>>>>> # Sample configuration file for Kannel bearerbox on Debian. >>>>>>>>>>> # See the documentation for explanations of fields. >>>>>>>>>>> # >>>>>>>>>>> >>>>>>>>>>> # HTTP administration is disabled by default. Make sure you set >>>>>>>>>>> the >>>>>>>>>>> # password if you enable it. >>>>>>>>>>> >>>>>>>>>>> group = core >>>>>>>>>>> admin-port = 13000 >>>>>>>>>>> admin-password = >>>>>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>>>>> admin-allow-ip = "" >>>>>>>>>>> #wapbox-port = 13002 >>>>>>>>>>> smsbox-port = 13001 >>>>>>>>>>> wdp-interface-name = "*" >>>>>>>>>>> log-file = "/var/log/kannel/bearerbox.log" >>>>>>>>>>> log-level = 0 >>>>>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>>>>> box-allow-ip = >>>>>>>>>>> #dlr-storage = pgsql >>>>>>>>>>> >>>>>>>>>>> #group = wapbox >>>>>>>>>>> #bearerbox-host = localhost >>>>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>>>> >>>>>>>>>>> group = smsbox >>>>>>>>>>> bearerbox-host = localhost >>>>>>>>>>> sendsms-port = 13013 >>>>>>>>>>> global-sender = 13013 >>>>>>>>>>> smsbox-id = box1 >>>>>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>>>>> log-level = 0 >>>>>>>>>>> >>>>>>>>>>> group = sendsms-user >>>>>>>>>>> username = >>>>>>>>>>> password = >>>>>>>>>>> dlr-url = " >>>>>>>>>>> http://localhost/kannel/dlr_status.php?id=%p&mask=%d&message_id=%F >>>>>>>>>>> " >>>>>>>>>>> >>>>>>>>>>> group = sms-service >>>>>>>>>>> keyword = default >>>>>>>>>>> get-url = " >>>>>>>>>>> http://localhost/kannel/receivesms.php?sender=%p&text=%a&receiverph=%P&smscid=%i >>>>>>>>>>> " >>>>>>>>>>> accept-x-kannel-headers = true >>>>>>>>>>> concatenation = true >>>>>>>>>>> catch-all = true >>>>>>>>>>> >>>>>>>>>>> #group = wapbox >>>>>>>>>>> #bearerbox-host = localhost >>>>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>>>> >>>>>>>>>>> group = smsc >>>>>>>>>>> smsc = smpp >>>>>>>>>>> smsc-id = >>>>>>>>>>> host = >>>>>>>>>>> port = 0 >>>>>>>>>>> smsc-username = >>>>>>>>>>> smsc-password = >>>>>>>>>>> system-type = VMA >>>>>>>>>>> transceiver-mode = false >>>>>>>>>>> receive-port = 9000 >>>>>>>>>>> interface-version = 34 >>>>>>>>>>> #connect-allow-ip = 127.0.0.1 >>>>>>>>>>> #msg-id-type = 0x00 >>>>>>>>>>> >>>>>>>>>>> group = pgsql-connection >>>>>>>>>>> id = mydlr >>>>>>>>>>> host = localhost >>>>>>>>>>> port = 5432 >>>>>>>>>>> username = postgres >>>>>>>>>>> password = _123ntGrac0N_ >>>>>>>>>>> database = postgres >>>>>>>>>>> max-connections = 1 >>>>>>>>>>> >>>>>>>>>>> group = dlr-db >>>>>>>>>>> id = mydlr >>>>>>>>>>> table = tbl_dlr >>>>>>>>>>> field-smsc = smsc >>>>>>>>>>> field-timestamp = _timstamp >>>>>>>>>>> field-destination = destination >>>>>>>>>>> field-source = source >>>>>>>>>>> field-service = _service >>>>>>>>>>> field-url = url >>>>>>>>>>> field-mask = mask >>>>>>>>>>> field-status = status >>>>>>>>>>> field-boxc-id = boxc_id >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Fri, May 2, 2014 at 5:06 PM, Bendon Murgor < >>>>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Send in your conf file... >>>>>>>>>>>> You may remove the passwords in it >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Best Regards, >>>>>>>>>>>> ----------------------------------------- >>>>>>>>>>>> Bendon Murgor >>>>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>>>> +254-720-529868 >>>>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>>>> ------------------------------ >>>>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>>>> *Date: *Fri, 2 May 2014 17:03:53 +0300 >>>>>>>>>>>> *To: *Murgor Bendon<bendonmur...@gmail.com> >>>>>>>>>>>> *Cc: *Kannel Users<users@kannel.org> >>>>>>>>>>>> *Subject: *Re: Kannel 1.5 smsbox error >>>>>>>>>>>> >>>>>>>>>>>> THanks Bendon, >>>>>>>>>>>> >>>>>>>>>>>> I have done that. Below is the new error I am getting. >>>>>>>>>>>> >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Connecting to <127.0.0.1> >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Connected to bearerbox at >>>>>>>>>>>> localhost port 13001. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Started thread 8 >>>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) maps to pid 1811. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Connection closed by the >>>>>>>>>>>> bearerbox. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Bearerbox is gone, >>>>>>>>>>>> restarting >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Received (and handled?) 0 >>>>>>>>>>>> requests in 0 seconds (-nan per second) >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Kannel smsbox terminating. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Error writing 12 octets >>>>>>>>>>>> to fd 45: >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: System error 32: Broken >>>>>>>>>>>> pipe >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Couldn't write Msg to >>>>>>>>>>>> bearerbox. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) terminates. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 2 >>>>>>>>>>>> (gwlib/http.c:server_thread) to terminate >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: HTTP: No clients with >>>>>>>>>>>> requests, quitting. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: Thread 3 >>>>>>>>>>>> (gw/smsbox.c:sendsms_thread) terminates. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [1] DEBUG: Thread 1 >>>>>>>>>>>> (gwlib/fdset.c:poller) terminates. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [2] DEBUG: Thread 2 >>>>>>>>>>>> (gwlib/http.c:server_thread) terminates. >>>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 5 >>>>>>>>>>>> (gw/smsbox.c:obey_request_thread) to terminate >>>>>>>>>>>> >>>>>>>>>>>> MT >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Fri, May 2, 2014 at 5:02 PM, Bendon Murgor < >>>>>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Boss, are you sure that is the correct location of your conf >>>>>>>>>>>>> file? >>>>>>>>>>>>> Have you followed the documentation? >>>>>>>>>>>>> Create the kannel.conf in your current working directory and >>>>>>>>>>>>> execute again. >>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>> ----------------------------------------- >>>>>>>>>>>>> Bendon Murgor >>>>>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>>>>> +254-720-529868 >>>>>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>>>>> *Sender: * "users" <users-boun...@kannel.org> >>>>>>>>>>>>> *Date: *Fri, 2 May 2014 16:56:53 +0300 >>>>>>>>>>>>> *To: *Kannel Users<users@kannel.org> >>>>>>>>>>>>> *Subject: *Kannel 1.5 smsbox error >>>>>>>>>>>>> >>>>>>>>>>>>> Hi All, >>>>>>>>>>>>> >>>>>>>>>>>>> I am getting the below error. Please assist. I tried locating >>>>>>>>>>>>> the /etc/default/kannel file but its not there. >>>>>>>>>>>>> root@rzpeiz52m2:/etc/default# /etc/kannel/sbin/smsbox >>>>>>>>>>>>> kannel.conf >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] INFO: Debug_lvl = -1, log_file >>>>>>>>>>>>> = <none>, log_lvl = 0 >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: fopen failed: couldn't >>>>>>>>>>>>> open `kannel.conf' >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: System error 2: No such >>>>>>>>>>>>> file or directory >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: Failed to load main >>>>>>>>>>>>> configuration file `kannel.conf'. Aborting! >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_backtrace+0xae) [0x440fee] >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_panic+0x169) [0x441169] >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /etc/kannel/sbin/smsbox(cfg_read+0x5d6) [0x42c826] >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /etc/kannel/sbin/smsbox(main+0x101) [0x40ce21] >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) >>>>>>>>>>>>> [0x7f485ec5476d] >>>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>>> /etc/kannel/sbin/smsbox() [0x40e3f5] >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Please assist. >>>>>>>>>>>>> MK >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
