I have tried it. I keep getting this error: checking for Ct-Lib support... no checking for FreeTDS Ct-Lib support... no checking for gw-config... /etc/kannel/bin/gw-config checking Kannel version... 1.5.0 checking Kannel libs... -L/etc/kannel/lib/kannel -lgw -lwap -lgwlib -lpq -lrt -lresolv -lnsl -lm -lpthread -L/usr/lib/x86_64-linux-gnu -lxml2 -L/usr/lib checking Kannel includes... -I/etc/kannel/include/kannel -g -O2 -D_XOPEN_SOURCE=600 -D_BSD_SOURCE -D_LARGE_FILES= -I/usr/include/libxml2 -I/usr/include/postgresql checking for cfg_create in -lgwlib... no configure: error: Kannel gwlib is required!
What do I do now? On Sun, May 4, 2014 at 9:23 AM, Saurabh Pandey <sam.it.develo...@gmail.com>wrote: > The file opensmppbox.c has errors. Use the default opensmppbox pkg which > came with the Kannel. You can find that in the same folder: > > *gateway-1.5.0/addons/opensmppbox* > > > On Sat, May 3, 2014 at 3:17 PM, MOSES KARIUKI <kariuk...@gmail.com> wrote: > >> Thanks a lot Sam, >> >> I followed your instructions, and it complied without errors using PGSQL. >> I now want to configure opensmppbox. However, when i compile using the >> command >> *./configure --prefix=/usr/local/kannel >> --with-kannel-dir=/usr/local/kannel* >> Downloaded from: >> *./configure --prefix=/usr/local/kannel >> --with-kannel-dir=/usr/local/kannel* >> This is the error I am getting. >> exit 1; f i >> opensmppbox.c: In function ‘send_pdu’: >> opensmppbox.c:622:5: warning: passing argument 1 of ‘smpp_pdu_dump’ from >> incompatible pointer type [enabled by d efault] >> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >> opensmppbox.c:622:5: error: too many arguments to function ‘smpp_pdu_dump’ >> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >> opensmppbox.c: In function ‘handle_pdu’: >> opensmppbox.c:1513:2: warning: passing argument 1 of ‘smpp_pdu_dump’ from >> incompatible pointer type [enabled by default] >> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >> opensmppbox.c:1513:2: error: too many arguments to function >> ‘smpp_pdu_dump’ >> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >> opensmppbox.c: In function ‘run_smppbox’: >> opensmppbox.c:2099:10: warning: cast from pointer to integer of different >> size [-Wpointer-to-int-cast] >> opensmppbox.c: In function ‘wait_for_connections’: >> opensmppbox.c:2156:10: warning: cast to pointer from integer of different >> size [-Wint-to-pointer-cast] >> opensmppbox.c: In function ‘smppboxc_run’: >> opensmppbox.c:2171:12: warning: cast from pointer to integer of different >> size [-Wpointer-to-int-cast] >> opensmppbox.c: In function ‘check_login’: >> opensmppbox.c:288:9: warning: ignoring return value of ‘fscanf’, declared >> with attribute warn_unused_result [-Wu nused-result] >> >> Thanks, >> MT >> >> >> >> >> On Sat, May 3, 2014 at 7:31 AM, Saurabh Pandey < >> sam.it.develo...@gmail.com> wrote: >> >>> Ok, start again from the begining. Remove all Kannel installations by >>> manually deleting files/binaries. Follow these steps exactly and you'd be >>> good to go: >>> >>> 1) download kannel pkg on server from redmine. Enter this command in >>> terminal >>> >>> >>> *mkdir /downloads* >>> >>> *cd /downloads* >>> >>> >>> *wget http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip >>> <http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip> * >>> 2) Unzip and install Kannel >>> >>> >>> *cd gateway-1.5.0/* >>> >>> *./configure --prefix=/usr/local/kannel --with-mysql >>> --with-mysql-dir=/usr/local/mysql* >>> >>> *make * >>> >>> >>> *make install* >>> 3) Write config file >>> >>> >>> *cd /usr/local/kannel/sbin/* >>> *vim kannel.conf *-- this will open editor and you can copy paste >>> conf from sample conf file provided in the pkg and edit according to your >>> needs >>> Esc+ :wq +Enter -- Save and exit editor >>> >>> 4) Start Kannel >>> Now since you've created conf file in the same directory as bearerbox >>> and smsbox you won't have to provide any paths. so simply enter >>> *./bearerbox, *press enter, close the terminal and in new terminal >>> session enter >>> >>> *./smsbox* >>> Now this must work for you. Also *"Broken Pipe"* error logged in your >>> logs means that the connection was broken which often times i've seen when >>> I'm working on my local system and I get disconnected from internet. So you >>> might wanna look into that too. >>> >>> Let me know how it works out. >>> >>> Cheers >>> -Sam >>> >>> >>> On Fri, May 2, 2014 at 8:21 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>> >>>> That's what is baffling me. I am unable to clear them. >>>> >>>> >>>> On Fri, May 2, 2014 at 5:49 PM, Otandeka Simon Peter < >>>> sotand...@gmail.com> wrote: >>>> >>>>> >>>>> You are almost there. Just clear out those errors and you are good >>>>> to. >>>>> >>>>> P. >>>>> >>>>> >>>>> @sotandeka >>>>> +256 716 801 124 >>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>> Systems. >>>>> Experienced Linux System Administrator and Open Source Developer. >>>>> >>>>> >>>>> >>>>> On Fri, May 2, 2014 at 5:45 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>>> >>>>>> Hi All, >>>>>> >>>>>> This is the bearer box log: >>>>>> >>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Couldn't open logfile >>>>>> `/var/log/kannel/bearerbox.log'. >>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: System error 2: No such file or >>>>>> directory >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SSL not supported, no SSL >>>>>> initialization done. >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: HTTP: Opening server at port >>>>>> 13000. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 1 >>>>>> (gwlib/fdset.c:poller) >>>>>> 2014-05-02 14:41:49 [1944] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>>>> maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 2 >>>>>> (gwlib/http.c:server_thread) >>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: Thread 2 >>>>>> (gwlib/http.c:server_thread) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [3] DEBUG: Thread 3 >>>>>> (gw/bb_http.c:httpadmin_run) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 3 >>>>>> (gw/bb_http.c:httpadmin_run) >>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: HTTP: Including port 13000, fd >>>>>> 8 for polling in server thread >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting smsbox connection >>>>>> module >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>>> set, using default (100). >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 4 >>>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>>> 2014-05-02 14:41:49 [1944] [4] DEBUG: Thread 4 >>>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 5 >>>>>> (gw/bb_boxc.c:smsboxc_run) >>>>>> 2014-05-02 14:41:49 [1944] [5] DEBUG: Thread 5 >>>>>> (gw/bb_boxc.c:smsboxc_run) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Set SMS resend frequency to 60 >>>>>> seconds. >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SMS resend retry set to >>>>>> unlimited. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: MO concatenated message >>>>>> handling enabled >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: DLR rerouting for smsc id >>>>>> <congoairtel> disabled. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 6 >>>>>> (gw/smsc/smsc_smpp.c:io_thread) >>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Thread 6 >>>>>> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 7 >>>>>> (gw/bb_smscconn.c:sms_router) >>>>>> 2014-05-02 14:41:49 [1944] [7] DEBUG: Thread 7 >>>>>> (gw/bb_smscconn.c:sms_router) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting UDP sender/receiver >>>>>> module >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Adding interface * >>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Connecting to <217.113.71.81> >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>> 0.0.0.0:9200> >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 8 >>>>>> (gw/bb_udp.c:udp_receiver) >>>>>> 2014-05-02 14:41:49 [1944] [8] DEBUG: Thread 8 >>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 9 >>>>>> (gw/bb_udp.c:udp_sender) >>>>>> 2014-05-02 14:41:49 [1944] [9] DEBUG: Thread 9 >>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>> 0.0.0.0:9201> >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 10 >>>>>> (gw/bb_udp.c:udp_receiver) >>>>>> 2014-05-02 14:41:49 [1944] [10] DEBUG: Thread 10 >>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 11 >>>>>> (gw/bb_udp.c:udp_sender) >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting wapbox connection >>>>>> module >>>>>> 2014-05-02 14:41:49 [1944] [11] DEBUG: Thread 11 >>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Missing wapbox-port variable, >>>>>> cannot start WAP >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting WDP router >>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 12 >>>>>> (gw/bearerbox.c:wdp_router) >>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: Thread 12 >>>>>> (gw/bearerbox.c:wdp_router) maps to pid 1944. >>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: udp_die: removing producers >>>>>> from udp-lists >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: >>>>>> ---------------------------------------- >>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Kannel bearerbox II version >>>>>> svn-r5089 starting >>>>>> >>>>>> >>>>>> >>>>>> On Fri, May 2, 2014 at 5:36 PM, Otandeka Simon Peter < >>>>>> sotand...@gmail.com> wrote: >>>>>> >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> 1. Run bearerbox first before running smsbox.... something like >>>>>>> /usr/local/sbin/bearerbox -v 0 /etc/kannel.conf >>>>>>> /usr/local/sbin/smsbox -v 0 /etc/kannel.conf >>>>>>> 2. Send us the full log at debug-level zero >>>>>>> (/usr/local/sbin/bearerbox -v 0 /etc/kannel.conf) >>>>>>> 3. Check that you reach your SMSC at the given port and connection >>>>>>> is stable. >>>>>>> 4. Also check for file permissions. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> @sotandeka >>>>>>> +256 716 801 124 >>>>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>>>> Systems. >>>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, May 2, 2014 at 5:11 PM, MOSES KARIUKI >>>>>>> <kariuk...@gmail.com>wrote: >>>>>>> >>>>>>>> Bendon, >>>>>>>> >>>>>>>> In Addition, these are the instructions I followed. >>>>>>>> >>>>>>>> svn co https://svn.kannel.org/gateway/trunk kannel-1.5 >>>>>>>> cd kannel-1.5 >>>>>>>> ./configure --with-mysql --prefix=/usr/local >>>>>>>> make >>>>>>>> make install >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, May 2, 2014 at 5:10 PM, MOSES KARIUKI >>>>>>>> <kariuk...@gmail.com>wrote: >>>>>>>> >>>>>>>>> # >>>>>>>>> # Sample configuration file for Kannel bearerbox on Debian. >>>>>>>>> # See the documentation for explanations of fields. >>>>>>>>> # >>>>>>>>> >>>>>>>>> # HTTP administration is disabled by default. Make sure you set the >>>>>>>>> # password if you enable it. >>>>>>>>> >>>>>>>>> group = core >>>>>>>>> admin-port = 13000 >>>>>>>>> admin-password = >>>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>>> admin-allow-ip = "" >>>>>>>>> #wapbox-port = 13002 >>>>>>>>> smsbox-port = 13001 >>>>>>>>> wdp-interface-name = "*" >>>>>>>>> log-file = "/var/log/kannel/bearerbox.log" >>>>>>>>> log-level = 0 >>>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>>> box-allow-ip = >>>>>>>>> #dlr-storage = pgsql >>>>>>>>> >>>>>>>>> #group = wapbox >>>>>>>>> #bearerbox-host = localhost >>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>> >>>>>>>>> group = smsbox >>>>>>>>> bearerbox-host = localhost >>>>>>>>> sendsms-port = 13013 >>>>>>>>> global-sender = 13013 >>>>>>>>> smsbox-id = box1 >>>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>>> log-level = 0 >>>>>>>>> >>>>>>>>> group = sendsms-user >>>>>>>>> username = >>>>>>>>> password = >>>>>>>>> dlr-url = " >>>>>>>>> http://localhost/kannel/dlr_status.php?id=%p&mask=%d&message_id=%F >>>>>>>>> " >>>>>>>>> >>>>>>>>> group = sms-service >>>>>>>>> keyword = default >>>>>>>>> get-url = " >>>>>>>>> http://localhost/kannel/receivesms.php?sender=%p&text=%a&receiverph=%P&smscid=%i >>>>>>>>> " >>>>>>>>> accept-x-kannel-headers = true >>>>>>>>> concatenation = true >>>>>>>>> catch-all = true >>>>>>>>> >>>>>>>>> #group = wapbox >>>>>>>>> #bearerbox-host = localhost >>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>> >>>>>>>>> group = smsc >>>>>>>>> smsc = smpp >>>>>>>>> smsc-id = >>>>>>>>> host = >>>>>>>>> port = 0 >>>>>>>>> smsc-username = >>>>>>>>> smsc-password = >>>>>>>>> system-type = VMA >>>>>>>>> transceiver-mode = false >>>>>>>>> receive-port = 9000 >>>>>>>>> interface-version = 34 >>>>>>>>> #connect-allow-ip = 127.0.0.1 >>>>>>>>> #msg-id-type = 0x00 >>>>>>>>> >>>>>>>>> group = pgsql-connection >>>>>>>>> id = mydlr >>>>>>>>> host = localhost >>>>>>>>> port = 5432 >>>>>>>>> username = postgres >>>>>>>>> password = _123ntGrac0N_ >>>>>>>>> database = postgres >>>>>>>>> max-connections = 1 >>>>>>>>> >>>>>>>>> group = dlr-db >>>>>>>>> id = mydlr >>>>>>>>> table = tbl_dlr >>>>>>>>> field-smsc = smsc >>>>>>>>> field-timestamp = _timstamp >>>>>>>>> field-destination = destination >>>>>>>>> field-source = source >>>>>>>>> field-service = _service >>>>>>>>> field-url = url >>>>>>>>> field-mask = mask >>>>>>>>> field-status = status >>>>>>>>> field-boxc-id = boxc_id >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, May 2, 2014 at 5:06 PM, Bendon Murgor < >>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Send in your conf file... >>>>>>>>>> You may remove the passwords in it >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Best Regards, >>>>>>>>>> ----------------------------------------- >>>>>>>>>> Bendon Murgor >>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>> +254-720-529868 >>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>> ------------------------------ >>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>> *Date: *Fri, 2 May 2014 17:03:53 +0300 >>>>>>>>>> *To: *Murgor Bendon<bendonmur...@gmail.com> >>>>>>>>>> *Cc: *Kannel Users<users@kannel.org> >>>>>>>>>> *Subject: *Re: Kannel 1.5 smsbox error >>>>>>>>>> >>>>>>>>>> THanks Bendon, >>>>>>>>>> >>>>>>>>>> I have done that. Below is the new error I am getting. >>>>>>>>>> >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Connecting to <127.0.0.1> >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Connected to bearerbox at >>>>>>>>>> localhost port 13001. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Started thread 8 >>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) >>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) maps to pid 1811. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Connection closed by the >>>>>>>>>> bearerbox. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Bearerbox is gone, >>>>>>>>>> restarting >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Received (and handled?) 0 >>>>>>>>>> requests in 0 seconds (-nan per second) >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Kannel smsbox terminating. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Error writing 12 octets to >>>>>>>>>> fd 45: >>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: System error 32: Broken pipe >>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Couldn't write Msg to >>>>>>>>>> bearerbox. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) terminates. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 2 >>>>>>>>>> (gwlib/http.c:server_thread) to terminate >>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: HTTP: No clients with >>>>>>>>>> requests, quitting. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: Thread 3 >>>>>>>>>> (gw/smsbox.c:sendsms_thread) terminates. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [1] DEBUG: Thread 1 >>>>>>>>>> (gwlib/fdset.c:poller) terminates. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [2] DEBUG: Thread 2 >>>>>>>>>> (gwlib/http.c:server_thread) terminates. >>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 5 >>>>>>>>>> (gw/smsbox.c:obey_request_thread) to terminate >>>>>>>>>> >>>>>>>>>> MT >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Fri, May 2, 2014 at 5:02 PM, Bendon Murgor < >>>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Boss, are you sure that is the correct location of your conf >>>>>>>>>>> file? >>>>>>>>>>> Have you followed the documentation? >>>>>>>>>>> Create the kannel.conf in your current working directory and >>>>>>>>>>> execute again. >>>>>>>>>>> Best Regards, >>>>>>>>>>> ----------------------------------------- >>>>>>>>>>> Bendon Murgor >>>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>>> +254-720-529868 >>>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>>> ------------------------------ >>>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>>> *Sender: * "users" <users-boun...@kannel.org> >>>>>>>>>>> *Date: *Fri, 2 May 2014 16:56:53 +0300 >>>>>>>>>>> *To: *Kannel Users<users@kannel.org> >>>>>>>>>>> *Subject: *Kannel 1.5 smsbox error >>>>>>>>>>> >>>>>>>>>>> Hi All, >>>>>>>>>>> >>>>>>>>>>> I am getting the below error. Please assist. I tried locating >>>>>>>>>>> the /etc/default/kannel file but its not there. >>>>>>>>>>> root@rzpeiz52m2:/etc/default# /etc/kannel/sbin/smsbox >>>>>>>>>>> kannel.conf >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] INFO: Debug_lvl = -1, log_file = >>>>>>>>>>> <none>, log_lvl = 0 >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: fopen failed: couldn't >>>>>>>>>>> open `kannel.conf' >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: System error 2: No such >>>>>>>>>>> file or directory >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: Failed to load main >>>>>>>>>>> configuration file `kannel.conf'. Aborting! >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_backtrace+0xae) [0x440fee] >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_panic+0x169) [0x441169] >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>> /etc/kannel/sbin/smsbox(cfg_read+0x5d6) [0x42c826] >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>> /etc/kannel/sbin/smsbox(main+0x101) [0x40ce21] >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) >>>>>>>>>>> [0x7f485ec5476d] >>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: /etc/kannel/sbin/smsbox() >>>>>>>>>>> [0x40e3f5] >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Please assist. >>>>>>>>>>> MK >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
