The file opensmppbox.c has errors. Use the default opensmppbox pkg which came with the Kannel. You can find that in the same folder:
*gateway-1.5.0/addons/opensmppbox* On Sat, May 3, 2014 at 3:17 PM, MOSES KARIUKI <kariuk...@gmail.com> wrote: > Thanks a lot Sam, > > I followed your instructions, and it complied without errors using PGSQL. > I now want to configure opensmppbox. However, when i compile using the > command > *./configure --prefix=/usr/local/kannel > --with-kannel-dir=/usr/local/kannel* > Downloaded from: > *./configure --prefix=/usr/local/kannel > --with-kannel-dir=/usr/local/kannel* > This is the error I am getting. > exit 1; f i > opensmppbox.c: In function ‘send_pdu’: > opensmppbox.c:622:5: warning: passing argument 1 of ‘smpp_pdu_dump’ from > incompatible pointer type [enabled by d efault] > /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected > ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ > opensmppbox.c:622:5: error: too many arguments to function ‘smpp_pdu_dump’ > /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here > opensmppbox.c: In function ‘handle_pdu’: > opensmppbox.c:1513:2: warning: passing argument 1 of ‘smpp_pdu_dump’ from > incompatible pointer type [enabled by default] > /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected > ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ > opensmppbox.c:1513:2: error: too many arguments to function ‘smpp_pdu_dump’ > /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here > opensmppbox.c: In function ‘run_smppbox’: > opensmppbox.c:2099:10: warning: cast from pointer to integer of different > size [-Wpointer-to-int-cast] > opensmppbox.c: In function ‘wait_for_connections’: > opensmppbox.c:2156:10: warning: cast to pointer from integer of different > size [-Wint-to-pointer-cast] > opensmppbox.c: In function ‘smppboxc_run’: > opensmppbox.c:2171:12: warning: cast from pointer to integer of different > size [-Wpointer-to-int-cast] > opensmppbox.c: In function ‘check_login’: > opensmppbox.c:288:9: warning: ignoring return value of ‘fscanf’, declared > with attribute warn_unused_result [-Wu nused-result] > > Thanks, > MT > > > > > On Sat, May 3, 2014 at 7:31 AM, Saurabh Pandey <sam.it.develo...@gmail.com > > wrote: > >> Ok, start again from the begining. Remove all Kannel installations by >> manually deleting files/binaries. Follow these steps exactly and you'd be >> good to go: >> >> 1) download kannel pkg on server from redmine. Enter this command in >> terminal >> >> >> *mkdir /downloads* >> >> *cd /downloads* >> >> >> *wget http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip >> <http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip> * >> 2) Unzip and install Kannel >> >> >> *cd gateway-1.5.0/* >> >> *./configure --prefix=/usr/local/kannel --with-mysql >> --with-mysql-dir=/usr/local/mysql* >> >> *make * >> >> >> *make install* >> 3) Write config file >> >> >> *cd /usr/local/kannel/sbin/* >> *vim kannel.conf *-- this will open editor and you can copy paste >> conf from sample conf file provided in the pkg and edit according to your >> needs >> Esc+ :wq +Enter -- Save and exit editor >> >> 4) Start Kannel >> Now since you've created conf file in the same directory as bearerbox and >> smsbox you won't have to provide any paths. so simply enter >> *./bearerbox, *press enter, close the terminal and in new terminal >> session enter >> >> *./smsbox* >> Now this must work for you. Also *"Broken Pipe"* error logged in your >> logs means that the connection was broken which often times i've seen when >> I'm working on my local system and I get disconnected from internet. So you >> might wanna look into that too. >> >> Let me know how it works out. >> >> Cheers >> -Sam >> >> >> On Fri, May 2, 2014 at 8:21 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >> >>> That's what is baffling me. I am unable to clear them. >>> >>> >>> On Fri, May 2, 2014 at 5:49 PM, Otandeka Simon Peter < >>> sotand...@gmail.com> wrote: >>> >>>> >>>> You are almost there. Just clear out those errors and you are good to. >>>> >>>> P. >>>> >>>> >>>> @sotandeka >>>> +256 716 801 124 >>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>> Systems. >>>> Experienced Linux System Administrator and Open Source Developer. >>>> >>>> >>>> >>>> On Fri, May 2, 2014 at 5:45 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>> >>>>> Hi All, >>>>> >>>>> This is the bearer box log: >>>>> >>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Couldn't open logfile >>>>> `/var/log/kannel/bearerbox.log'. >>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: System error 2: No such file or >>>>> directory >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SSL not supported, no SSL >>>>> initialization done. >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: HTTP: Opening server at port >>>>> 13000. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 1 >>>>> (gwlib/fdset.c:poller) >>>>> 2014-05-02 14:41:49 [1944] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>>> maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: Thread 2 >>>>> (gwlib/http.c:server_thread) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [3] DEBUG: Thread 3 >>>>> (gw/bb_http.c:httpadmin_run) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: HTTP: Including port 13000, fd 8 >>>>> for polling in server thread >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting smsbox connection module >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>> set, using default (100). >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>> 2014-05-02 14:41:49 [1944] [4] DEBUG: Thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> 2014-05-02 14:41:49 [1944] [5] DEBUG: Thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Set SMS resend frequency to 60 >>>>> seconds. >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SMS resend retry set to unlimited. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: MO concatenated message handling >>>>> enabled >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: DLR rerouting for smsc id >>>>> <congoairtel> disabled. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 6 >>>>> (gw/smsc/smsc_smpp.c:io_thread) >>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Thread 6 >>>>> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 7 >>>>> (gw/bb_smscconn.c:sms_router) >>>>> 2014-05-02 14:41:49 [1944] [7] DEBUG: Thread 7 >>>>> (gw/bb_smscconn.c:sms_router) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting UDP sender/receiver >>>>> module >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Adding interface * >>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Connecting to <217.113.71.81> >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>> 0.0.0.0:9200> >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 8 >>>>> (gw/bb_udp.c:udp_receiver) >>>>> 2014-05-02 14:41:49 [1944] [8] DEBUG: Thread 8 >>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 9 >>>>> (gw/bb_udp.c:udp_sender) >>>>> 2014-05-02 14:41:49 [1944] [9] DEBUG: Thread 9 >>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>> 0.0.0.0:9201> >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 10 >>>>> (gw/bb_udp.c:udp_receiver) >>>>> 2014-05-02 14:41:49 [1944] [10] DEBUG: Thread 10 >>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 11 >>>>> (gw/bb_udp.c:udp_sender) >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting wapbox connection module >>>>> 2014-05-02 14:41:49 [1944] [11] DEBUG: Thread 11 >>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Missing wapbox-port variable, >>>>> cannot start WAP >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting WDP router >>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 12 >>>>> (gw/bearerbox.c:wdp_router) >>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: Thread 12 >>>>> (gw/bearerbox.c:wdp_router) maps to pid 1944. >>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: udp_die: removing producers >>>>> from udp-lists >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: >>>>> ---------------------------------------- >>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Kannel bearerbox II version >>>>> svn-r5089 starting >>>>> >>>>> >>>>> >>>>> On Fri, May 2, 2014 at 5:36 PM, Otandeka Simon Peter < >>>>> sotand...@gmail.com> wrote: >>>>> >>>>>> >>>>>> Hi, >>>>>> >>>>>> 1. Run bearerbox first before running smsbox.... something like >>>>>> /usr/local/sbin/bearerbox -v 0 /etc/kannel.conf >>>>>> /usr/local/sbin/smsbox -v 0 /etc/kannel.conf >>>>>> 2. Send us the full log at debug-level zero >>>>>> (/usr/local/sbin/bearerbox -v 0 /etc/kannel.conf) >>>>>> 3. Check that you reach your SMSC at the given port and connection is >>>>>> stable. >>>>>> 4. Also check for file permissions. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> @sotandeka >>>>>> +256 716 801 124 >>>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>>> Systems. >>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>> >>>>>> >>>>>> >>>>>> On Fri, May 2, 2014 at 5:11 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>>>> >>>>>>> Bendon, >>>>>>> >>>>>>> In Addition, these are the instructions I followed. >>>>>>> >>>>>>> svn co https://svn.kannel.org/gateway/trunk kannel-1.5 >>>>>>> cd kannel-1.5 >>>>>>> ./configure --with-mysql --prefix=/usr/local >>>>>>> make >>>>>>> make install >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, May 2, 2014 at 5:10 PM, MOSES KARIUKI >>>>>>> <kariuk...@gmail.com>wrote: >>>>>>> >>>>>>>> # >>>>>>>> # Sample configuration file for Kannel bearerbox on Debian. >>>>>>>> # See the documentation for explanations of fields. >>>>>>>> # >>>>>>>> >>>>>>>> # HTTP administration is disabled by default. Make sure you set the >>>>>>>> # password if you enable it. >>>>>>>> >>>>>>>> group = core >>>>>>>> admin-port = 13000 >>>>>>>> admin-password = >>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>> admin-allow-ip = "" >>>>>>>> #wapbox-port = 13002 >>>>>>>> smsbox-port = 13001 >>>>>>>> wdp-interface-name = "*" >>>>>>>> log-file = "/var/log/kannel/bearerbox.log" >>>>>>>> log-level = 0 >>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>> box-allow-ip = >>>>>>>> #dlr-storage = pgsql >>>>>>>> >>>>>>>> #group = wapbox >>>>>>>> #bearerbox-host = localhost >>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>> >>>>>>>> group = smsbox >>>>>>>> bearerbox-host = localhost >>>>>>>> sendsms-port = 13013 >>>>>>>> global-sender = 13013 >>>>>>>> smsbox-id = box1 >>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>> log-level = 0 >>>>>>>> >>>>>>>> group = sendsms-user >>>>>>>> username = >>>>>>>> password = >>>>>>>> dlr-url = " >>>>>>>> http://localhost/kannel/dlr_status.php?id=%p&mask=%d&message_id=%F"; >>>>>>>> >>>>>>>> group = sms-service >>>>>>>> keyword = default >>>>>>>> get-url = " >>>>>>>> http://localhost/kannel/receivesms.php?sender=%p&text=%a&receiverph=%P&smscid=%i >>>>>>>> " >>>>>>>> accept-x-kannel-headers = true >>>>>>>> concatenation = true >>>>>>>> catch-all = true >>>>>>>> >>>>>>>> #group = wapbox >>>>>>>> #bearerbox-host = localhost >>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>> >>>>>>>> group = smsc >>>>>>>> smsc = smpp >>>>>>>> smsc-id = >>>>>>>> host = >>>>>>>> port = 0 >>>>>>>> smsc-username = >>>>>>>> smsc-password = >>>>>>>> system-type = VMA >>>>>>>> transceiver-mode = false >>>>>>>> receive-port = 9000 >>>>>>>> interface-version = 34 >>>>>>>> #connect-allow-ip = 127.0.0.1 >>>>>>>> #msg-id-type = 0x00 >>>>>>>> >>>>>>>> group = pgsql-connection >>>>>>>> id = mydlr >>>>>>>> host = localhost >>>>>>>> port = 5432 >>>>>>>> username = postgres >>>>>>>> password = _123ntGrac0N_ >>>>>>>> database = postgres >>>>>>>> max-connections = 1 >>>>>>>> >>>>>>>> group = dlr-db >>>>>>>> id = mydlr >>>>>>>> table = tbl_dlr >>>>>>>> field-smsc = smsc >>>>>>>> field-timestamp = _timstamp >>>>>>>> field-destination = destination >>>>>>>> field-source = source >>>>>>>> field-service = _service >>>>>>>> field-url = url >>>>>>>> field-mask = mask >>>>>>>> field-status = status >>>>>>>> field-boxc-id = boxc_id >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, May 2, 2014 at 5:06 PM, Bendon Murgor < >>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Send in your conf file... >>>>>>>>> You may remove the passwords in it >>>>>>>>> >>>>>>>>> >>>>>>>>> Best Regards, >>>>>>>>> ----------------------------------------- >>>>>>>>> Bendon Murgor >>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>> +254-720-529868 >>>>>>>>> Sent from my BlackBerry® >>>>>>>>> ------------------------------ >>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>> *Date: *Fri, 2 May 2014 17:03:53 +0300 >>>>>>>>> *To: *Murgor Bendon<bendonmur...@gmail.com> >>>>>>>>> *Cc: *Kannel Users<users@kannel.org> >>>>>>>>> *Subject: *Re: Kannel 1.5 smsbox error >>>>>>>>> >>>>>>>>> THanks Bendon, >>>>>>>>> >>>>>>>>> I have done that. Below is the new error I am getting. >>>>>>>>> >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Connecting to <127.0.0.1> >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Connected to bearerbox at >>>>>>>>> localhost port 13001. >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Started thread 8 >>>>>>>>> (gw/heartbeat.c:heartbeat_thread) >>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>> (gw/heartbeat.c:heartbeat_thread) maps to pid 1811. >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Connection closed by the >>>>>>>>> bearerbox. >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Bearerbox is gone, restarting >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Received (and handled?) 0 >>>>>>>>> requests in 0 seconds (-nan per second) >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Kannel smsbox terminating. >>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Error writing 12 octets to >>>>>>>>> fd 45: >>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: System error 32: Broken pipe >>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Couldn't write Msg to >>>>>>>>> bearerbox. >>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>> (gw/heartbeat.c:heartbeat_thread) terminates. >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 2 >>>>>>>>> (gwlib/http.c:server_thread) to terminate >>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: HTTP: No clients with >>>>>>>>> requests, quitting. >>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: Thread 3 >>>>>>>>> (gw/smsbox.c:sendsms_thread) terminates. >>>>>>>>> 2014-05-02 14:01:07 [1811] [1] DEBUG: Thread 1 >>>>>>>>> (gwlib/fdset.c:poller) terminates. >>>>>>>>> 2014-05-02 14:01:07 [1811] [2] DEBUG: Thread 2 >>>>>>>>> (gwlib/http.c:server_thread) terminates. >>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 5 >>>>>>>>> (gw/smsbox.c:obey_request_thread) to terminate >>>>>>>>> >>>>>>>>> MT >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, May 2, 2014 at 5:02 PM, Bendon Murgor < >>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Boss, are you sure that is the correct location of your conf file? >>>>>>>>>> Have you followed the documentation? >>>>>>>>>> Create the kannel.conf in your current working directory and >>>>>>>>>> execute again. >>>>>>>>>> Best Regards, >>>>>>>>>> ----------------------------------------- >>>>>>>>>> Bendon Murgor >>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>> +254-720-529868 >>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>> ------------------------------ >>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>> *Sender: * "users" <users-boun...@kannel.org> >>>>>>>>>> *Date: *Fri, 2 May 2014 16:56:53 +0300 >>>>>>>>>> *To: *Kannel Users<users@kannel.org> >>>>>>>>>> *Subject: *Kannel 1.5 smsbox error >>>>>>>>>> >>>>>>>>>> Hi All, >>>>>>>>>> >>>>>>>>>> I am getting the below error. Please assist. I tried locating the >>>>>>>>>> /etc/default/kannel file but its not there. >>>>>>>>>> root@rzpeiz52m2:/etc/default# /etc/kannel/sbin/smsbox kannel.conf >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] INFO: Debug_lvl = -1, log_file = >>>>>>>>>> <none>, log_lvl = 0 >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: fopen failed: couldn't >>>>>>>>>> open `kannel.conf' >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: System error 2: No such >>>>>>>>>> file or directory >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: Failed to load main >>>>>>>>>> configuration file `kannel.conf'. Aborting! >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>> /etc/kannel/sbin/smsbox(gw_backtrace+0xae) [0x440fee] >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>> /etc/kannel/sbin/smsbox(gw_panic+0x169) [0x441169] >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>> /etc/kannel/sbin/smsbox(cfg_read+0x5d6) [0x42c826] >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>> /etc/kannel/sbin/smsbox(main+0x101) [0x40ce21] >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) >>>>>>>>>> [0x7f485ec5476d] >>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: /etc/kannel/sbin/smsbox() >>>>>>>>>> [0x40e3f5] >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Please assist. >>>>>>>>>> MK >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
