2014-05-04 16:58 GMT+04:00 MOSES KARIUKI <kariuk...@gmail.com>: > I have tried it. I keep getting this error: > > checking for Ct-Lib support... no > checking for FreeTDS Ct-Lib support... no > checking for gw-config... /etc/kannel/bin/gw-config > checking Kannel version... 1.5.0 > checking Kannel libs... -L/etc/kannel/lib/kannel -lgw -lwap -lgwlib -lpq > -lrt -lresolv -lnsl -lm -lpthread -L/usr/lib/x86_64-linux-gnu -lxml2 > -L/usr/lib > checking Kannel includes... -I/etc/kannel/include/kannel -g -O2 > -D_XOPEN_SOURCE=600 -D_BSD_SOURCE -D_LARGE_FILES= -I/usr/include/libxml2 > -I/usr/include/postgresql > checking for cfg_create in -lgwlib... no >
> configure: error: Kannel gwlib is required! > Install kannel before compiling sqlbox/opensmmpbox. > > What do I do now? > > > On Sun, May 4, 2014 at 9:23 AM, Saurabh Pandey <sam.it.develo...@gmail.com > > wrote: > >> The file opensmppbox.c has errors. Use the default opensmppbox pkg which >> came with the Kannel. You can find that in the same folder: >> >> *gateway-1.5.0/addons/opensmppbox* >> >> >> On Sat, May 3, 2014 at 3:17 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >> >>> Thanks a lot Sam, >>> >>> I followed your instructions, and it complied without errors using >>> PGSQL. >>> I now want to configure opensmppbox. However, when i compile using the >>> command >>> *./configure --prefix=/usr/local/kannel >>> --with-kannel-dir=/usr/local/kannel* >>> Downloaded from: >>> *./configure --prefix=/usr/local/kannel >>> --with-kannel-dir=/usr/local/kannel* >>> This is the error I am getting. >>> exit 1; f i >>> opensmppbox.c: In function ‘send_pdu’: >>> opensmppbox.c:622:5: warning: passing argument 1 of ‘smpp_pdu_dump’ from >>> incompatible pointer type [enabled by d efault] >>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >>> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >>> opensmppbox.c:622:5: error: too many arguments to function >>> ‘smpp_pdu_dump’ >>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >>> opensmppbox.c: In function ‘handle_pdu’: >>> opensmppbox.c:1513:2: warning: passing argument 1 of ‘smpp_pdu_dump’ >>> from incompatible pointer type [enabled by default] >>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: expected >>> ‘struct SMPP_PDU *’ but argument is of type ‘struct Octstr *’ >>> opensmppbox.c:1513:2: error: too many arguments to function >>> ‘smpp_pdu_dump’ >>> /etc/kannel/include/kannel/gw/smsc/smpp_pdu.h:237:6: note: declared here >>> opensmppbox.c: In function ‘run_smppbox’: >>> opensmppbox.c:2099:10: warning: cast from pointer to integer of >>> different size [-Wpointer-to-int-cast] >>> opensmppbox.c: In function ‘wait_for_connections’: >>> opensmppbox.c:2156:10: warning: cast to pointer from integer of >>> different size [-Wint-to-pointer-cast] >>> opensmppbox.c: In function ‘smppboxc_run’: >>> opensmppbox.c:2171:12: warning: cast from pointer to integer of >>> different size [-Wpointer-to-int-cast] >>> opensmppbox.c: In function ‘check_login’: >>> opensmppbox.c:288:9: warning: ignoring return value of ‘fscanf’, >>> declared with attribute warn_unused_result [-Wu nused-result] >>> >>> Thanks, >>> MT >>> >>> >>> >>> >>> On Sat, May 3, 2014 at 7:31 AM, Saurabh Pandey < >>> sam.it.develo...@gmail.com> wrote: >>> >>>> Ok, start again from the begining. Remove all Kannel installations by >>>> manually deleting files/binaries. Follow these steps exactly and you'd be >>>> good to go: >>>> >>>> 1) download kannel pkg on server from redmine. Enter this command in >>>> terminal >>>> >>>> >>>> *mkdir /downloads* >>>> >>>> *cd /downloads* >>>> >>>> >>>> *wget http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip >>>> <http://www.kannel.org/download/1.5.0/gateway-1.5.0.zip> * >>>> 2) Unzip and install Kannel >>>> >>>> >>>> *cd gateway-1.5.0/* >>>> >>>> *./configure --prefix=/usr/local/kannel --with-mysql >>>> --with-mysql-dir=/usr/local/mysql* >>>> >>>> *make * >>>> >>>> >>>> *make install* >>>> 3) Write config file >>>> >>>> >>>> *cd /usr/local/kannel/sbin/* >>>> *vim kannel.conf *-- this will open editor and you can copy paste >>>> conf from sample conf file provided in the pkg and edit according to your >>>> needs >>>> Esc+ :wq +Enter -- Save and exit editor >>>> >>>> 4) Start Kannel >>>> Now since you've created conf file in the same directory as bearerbox >>>> and smsbox you won't have to provide any paths. so simply enter >>>> *./bearerbox, *press enter, close the terminal and in new terminal >>>> session enter >>>> >>>> *./smsbox* >>>> Now this must work for you. Also *"Broken Pipe"* error logged in your >>>> logs means that the connection was broken which often times i've seen when >>>> I'm working on my local system and I get disconnected from internet. So you >>>> might wanna look into that too. >>>> >>>> Let me know how it works out. >>>> >>>> Cheers >>>> -Sam >>>> >>>> >>>> On Fri, May 2, 2014 at 8:21 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>> >>>>> That's what is baffling me. I am unable to clear them. >>>>> >>>>> >>>>> On Fri, May 2, 2014 at 5:49 PM, Otandeka Simon Peter < >>>>> sotand...@gmail.com> wrote: >>>>> >>>>>> >>>>>> You are almost there. Just clear out those errors and you are good >>>>>> to. >>>>>> >>>>>> P. >>>>>> >>>>>> >>>>>> @sotandeka >>>>>> +256 716 801 124 >>>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>>> Systems. >>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>> >>>>>> >>>>>> >>>>>> On Fri, May 2, 2014 at 5:45 PM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>>>>> >>>>>>> Hi All, >>>>>>> >>>>>>> This is the bearer box log: >>>>>>> >>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Couldn't open logfile >>>>>>> `/var/log/kannel/bearerbox.log'. >>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: System error 2: No such file >>>>>>> or directory >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SSL not supported, no SSL >>>>>>> initialization done. >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: HTTP: Opening server at port >>>>>>> 13000. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 1 >>>>>>> (gwlib/fdset.c:poller) >>>>>>> 2014-05-02 14:41:49 [1944] [1] DEBUG: Thread 1 >>>>>>> (gwlib/fdset.c:poller) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 2 >>>>>>> (gwlib/http.c:server_thread) >>>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: Thread 2 >>>>>>> (gwlib/http.c:server_thread) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [3] DEBUG: Thread 3 >>>>>>> (gw/bb_http.c:httpadmin_run) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 3 >>>>>>> (gw/bb_http.c:httpadmin_run) >>>>>>> 2014-05-02 14:41:49 [1944] [2] DEBUG: HTTP: Including port 13000, fd >>>>>>> 8 for polling in server thread >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting smsbox connection >>>>>>> module >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>>>> set, using default (100). >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 4 >>>>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>>>> 2014-05-02 14:41:49 [1944] [4] DEBUG: Thread 4 >>>>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 5 >>>>>>> (gw/bb_boxc.c:smsboxc_run) >>>>>>> 2014-05-02 14:41:49 [1944] [5] DEBUG: Thread 5 >>>>>>> (gw/bb_boxc.c:smsboxc_run) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Set SMS resend frequency to 60 >>>>>>> seconds. >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: SMS resend retry set to >>>>>>> unlimited. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: MO concatenated message >>>>>>> handling enabled >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: DLR rerouting for smsc id >>>>>>> <congoairtel> disabled. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 6 >>>>>>> (gw/smsc/smsc_smpp.c:io_thread) >>>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Thread 6 >>>>>>> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 7 >>>>>>> (gw/bb_smscconn.c:sms_router) >>>>>>> 2014-05-02 14:41:49 [1944] [7] DEBUG: Thread 7 >>>>>>> (gw/bb_smscconn.c:sms_router) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting UDP sender/receiver >>>>>>> module >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Adding interface * >>>>>>> 2014-05-02 14:41:49 [1944] [6] DEBUG: Connecting to <217.113.71.81> >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>>> 0.0.0.0:9200> >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 8 >>>>>>> (gw/bb_udp.c:udp_receiver) >>>>>>> 2014-05-02 14:41:49 [1944] [8] DEBUG: Thread 8 >>>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 9 >>>>>>> (gw/bb_udp.c:udp_sender) >>>>>>> 2014-05-02 14:41:49 [1944] [9] DEBUG: Thread 9 >>>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: udpc_create: Bound to UDP < >>>>>>> 0.0.0.0:9201> >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 10 >>>>>>> (gw/bb_udp.c:udp_receiver) >>>>>>> 2014-05-02 14:41:49 [1944] [10] DEBUG: Thread 10 >>>>>>> (gw/bb_udp.c:udp_receiver) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 11 >>>>>>> (gw/bb_udp.c:udp_sender) >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting wapbox connection >>>>>>> module >>>>>>> 2014-05-02 14:41:49 [1944] [11] DEBUG: Thread 11 >>>>>>> (gw/bb_udp.c:udp_sender) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [0] ERROR: Missing wapbox-port variable, >>>>>>> cannot start WAP >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: starting WDP router >>>>>>> 2014-05-02 14:41:49 [1944] [0] DEBUG: Started thread 12 >>>>>>> (gw/bearerbox.c:wdp_router) >>>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: Thread 12 >>>>>>> (gw/bearerbox.c:wdp_router) maps to pid 1944. >>>>>>> 2014-05-02 14:41:49 [1944] [12] DEBUG: udp_die: removing producers >>>>>>> from udp-lists >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: >>>>>>> ---------------------------------------- >>>>>>> 2014-05-02 14:41:49 [1944] [0] INFO: Kannel bearerbox II version >>>>>>> svn-r5089 starting >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, May 2, 2014 at 5:36 PM, Otandeka Simon Peter < >>>>>>> sotand...@gmail.com> wrote: >>>>>>> >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> 1. Run bearerbox first before running smsbox.... something like >>>>>>>> /usr/local/sbin/bearerbox -v 0 /etc/kannel.conf >>>>>>>> /usr/local/sbin/smsbox -v 0 /etc/kannel.conf >>>>>>>> 2. Send us the full log at debug-level zero >>>>>>>> (/usr/local/sbin/bearerbox -v 0 /etc/kannel.conf) >>>>>>>> 3. Check that you reach your SMSC at the given port and connection >>>>>>>> is stable. >>>>>>>> 4. Also check for file permissions. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> @sotandeka >>>>>>>> +256 716 801 124 >>>>>>>> Senior Programmer in VAS Mobile services, ERP, Health and Web-based >>>>>>>> Systems. >>>>>>>> Experienced Linux System Administrator and Open Source Developer. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, May 2, 2014 at 5:11 PM, MOSES KARIUKI >>>>>>>> <kariuk...@gmail.com>wrote: >>>>>>>> >>>>>>>>> Bendon, >>>>>>>>> >>>>>>>>> In Addition, these are the instructions I followed. >>>>>>>>> >>>>>>>>> svn co https://svn.kannel.org/gateway/trunk kannel-1.5 >>>>>>>>> cd kannel-1.5 >>>>>>>>> ./configure --with-mysql --prefix=/usr/local >>>>>>>>> make >>>>>>>>> make install >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, May 2, 2014 at 5:10 PM, MOSES KARIUKI <kariuk...@gmail.com >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> # >>>>>>>>>> # Sample configuration file for Kannel bearerbox on Debian. >>>>>>>>>> # See the documentation for explanations of fields. >>>>>>>>>> # >>>>>>>>>> >>>>>>>>>> # HTTP administration is disabled by default. Make sure you set >>>>>>>>>> the >>>>>>>>>> # password if you enable it. >>>>>>>>>> >>>>>>>>>> group = core >>>>>>>>>> admin-port = 13000 >>>>>>>>>> admin-password = >>>>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>>>> admin-allow-ip = "" >>>>>>>>>> #wapbox-port = 13002 >>>>>>>>>> smsbox-port = 13001 >>>>>>>>>> wdp-interface-name = "*" >>>>>>>>>> log-file = "/var/log/kannel/bearerbox.log" >>>>>>>>>> log-level = 0 >>>>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>>>> box-allow-ip = >>>>>>>>>> #dlr-storage = pgsql >>>>>>>>>> >>>>>>>>>> #group = wapbox >>>>>>>>>> #bearerbox-host = localhost >>>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>>> >>>>>>>>>> group = smsbox >>>>>>>>>> bearerbox-host = localhost >>>>>>>>>> sendsms-port = 13013 >>>>>>>>>> global-sender = 13013 >>>>>>>>>> smsbox-id = box1 >>>>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>>>> log-level = 0 >>>>>>>>>> >>>>>>>>>> group = sendsms-user >>>>>>>>>> username = >>>>>>>>>> password = >>>>>>>>>> dlr-url = " >>>>>>>>>> http://localhost/kannel/dlr_status.php?id=%p&mask=%d&message_id=%F >>>>>>>>>> " >>>>>>>>>> >>>>>>>>>> group = sms-service >>>>>>>>>> keyword = default >>>>>>>>>> get-url = " >>>>>>>>>> http://localhost/kannel/receivesms.php?sender=%p&text=%a&receiverph=%P&smscid=%i >>>>>>>>>> " >>>>>>>>>> accept-x-kannel-headers = true >>>>>>>>>> concatenation = true >>>>>>>>>> catch-all = true >>>>>>>>>> >>>>>>>>>> #group = wapbox >>>>>>>>>> #bearerbox-host = localhost >>>>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>>>> >>>>>>>>>> group = smsc >>>>>>>>>> smsc = smpp >>>>>>>>>> smsc-id = >>>>>>>>>> host = >>>>>>>>>> port = 0 >>>>>>>>>> smsc-username = >>>>>>>>>> smsc-password = >>>>>>>>>> system-type = VMA >>>>>>>>>> transceiver-mode = false >>>>>>>>>> receive-port = 9000 >>>>>>>>>> interface-version = 34 >>>>>>>>>> #connect-allow-ip = 127.0.0.1 >>>>>>>>>> #msg-id-type = 0x00 >>>>>>>>>> >>>>>>>>>> group = pgsql-connection >>>>>>>>>> id = mydlr >>>>>>>>>> host = localhost >>>>>>>>>> port = 5432 >>>>>>>>>> username = postgres >>>>>>>>>> password = _123ntGrac0N_ >>>>>>>>>> database = postgres >>>>>>>>>> max-connections = 1 >>>>>>>>>> >>>>>>>>>> group = dlr-db >>>>>>>>>> id = mydlr >>>>>>>>>> table = tbl_dlr >>>>>>>>>> field-smsc = smsc >>>>>>>>>> field-timestamp = _timstamp >>>>>>>>>> field-destination = destination >>>>>>>>>> field-source = source >>>>>>>>>> field-service = _service >>>>>>>>>> field-url = url >>>>>>>>>> field-mask = mask >>>>>>>>>> field-status = status >>>>>>>>>> field-boxc-id = boxc_id >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Fri, May 2, 2014 at 5:06 PM, Bendon Murgor < >>>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Send in your conf file... >>>>>>>>>>> You may remove the passwords in it >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Best Regards, >>>>>>>>>>> ----------------------------------------- >>>>>>>>>>> Bendon Murgor >>>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>>> +254-720-529868 >>>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>>> ------------------------------ >>>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>>> *Date: *Fri, 2 May 2014 17:03:53 +0300 >>>>>>>>>>> *To: *Murgor Bendon<bendonmur...@gmail.com> >>>>>>>>>>> *Cc: *Kannel Users<users@kannel.org> >>>>>>>>>>> *Subject: *Re: Kannel 1.5 smsbox error >>>>>>>>>>> >>>>>>>>>>> THanks Bendon, >>>>>>>>>>> >>>>>>>>>>> I have done that. Below is the new error I am getting. >>>>>>>>>>> >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Connecting to <127.0.0.1> >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Connected to bearerbox at >>>>>>>>>>> localhost port 13001. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Started thread 8 >>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) maps to pid 1811. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Connection closed by the >>>>>>>>>>> bearerbox. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] ERROR: Bearerbox is gone, >>>>>>>>>>> restarting >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Received (and handled?) 0 >>>>>>>>>>> requests in 0 seconds (-nan per second) >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] INFO: Kannel smsbox terminating. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Error writing 12 octets to >>>>>>>>>>> fd 45: >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: System error 32: Broken >>>>>>>>>>> pipe >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] ERROR: Couldn't write Msg to >>>>>>>>>>> bearerbox. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [8] DEBUG: Thread 8 >>>>>>>>>>> (gw/heartbeat.c:heartbeat_thread) terminates. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 2 >>>>>>>>>>> (gwlib/http.c:server_thread) to terminate >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: HTTP: No clients with >>>>>>>>>>> requests, quitting. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [3] DEBUG: Thread 3 >>>>>>>>>>> (gw/smsbox.c:sendsms_thread) terminates. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [1] DEBUG: Thread 1 >>>>>>>>>>> (gwlib/fdset.c:poller) terminates. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [2] DEBUG: Thread 2 >>>>>>>>>>> (gwlib/http.c:server_thread) terminates. >>>>>>>>>>> 2014-05-02 14:01:07 [1811] [0] DEBUG: Waiting for 5 >>>>>>>>>>> (gw/smsbox.c:obey_request_thread) to terminate >>>>>>>>>>> >>>>>>>>>>> MT >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Fri, May 2, 2014 at 5:02 PM, Bendon Murgor < >>>>>>>>>>> bendonmur...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Boss, are you sure that is the correct location of your conf >>>>>>>>>>>> file? >>>>>>>>>>>> Have you followed the documentation? >>>>>>>>>>>> Create the kannel.conf in your current working directory and >>>>>>>>>>>> execute again. >>>>>>>>>>>> Best Regards, >>>>>>>>>>>> ----------------------------------------- >>>>>>>>>>>> Bendon Murgor >>>>>>>>>>>> Sytems Engineer/IT Systems Auditor >>>>>>>>>>>> +254-720-529868 >>>>>>>>>>>> Sent from my BlackBerry® >>>>>>>>>>>> ------------------------------ >>>>>>>>>>>> *From: * MOSES KARIUKI <kariuk...@gmail.com> >>>>>>>>>>>> *Sender: * "users" <users-boun...@kannel.org> >>>>>>>>>>>> *Date: *Fri, 2 May 2014 16:56:53 +0300 >>>>>>>>>>>> *To: *Kannel Users<users@kannel.org> >>>>>>>>>>>> *Subject: *Kannel 1.5 smsbox error >>>>>>>>>>>> >>>>>>>>>>>> Hi All, >>>>>>>>>>>> >>>>>>>>>>>> I am getting the below error. Please assist. I tried locating >>>>>>>>>>>> the /etc/default/kannel file but its not there. >>>>>>>>>>>> root@rzpeiz52m2:/etc/default# /etc/kannel/sbin/smsbox >>>>>>>>>>>> kannel.conf >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] INFO: Debug_lvl = -1, log_file >>>>>>>>>>>> = <none>, log_lvl = 0 >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: fopen failed: couldn't >>>>>>>>>>>> open `kannel.conf' >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] ERROR: System error 2: No such >>>>>>>>>>>> file or directory >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: Failed to load main >>>>>>>>>>>> configuration file `kannel.conf'. Aborting! >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_backtrace+0xae) [0x440fee] >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /etc/kannel/sbin/smsbox(gw_panic+0x169) [0x441169] >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /etc/kannel/sbin/smsbox(cfg_read+0x5d6) [0x42c826] >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /etc/kannel/sbin/smsbox(main+0x101) [0x40ce21] >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) >>>>>>>>>>>> [0x7f485ec5476d] >>>>>>>>>>>> 2014-05-02 13:46:26 [24447] [0] PANIC: >>>>>>>>>>>> /etc/kannel/sbin/smsbox() [0x40e3f5] >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Please assist. >>>>>>>>>>>> MK >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
