i tried AT+CNMI="0,2,3" in kannel.conf and it worked. is this ok to receive sms ?
On Wed, Nov 24, 2010 at 6:28 PM, Harbhag Singh Sohal <harbhag.so...@gmail.com> wrote: > at minicom console i got this > > AT+CNMI=? > +CNMI: (0-3), (0-3), (0,2,3), (0,1), (0,1) > > OK > So what can be correct configuration with this output ? > > On Wed, Nov 24, 2010 at 6:25 PM, Mfawa Alfred Onen > <muffycomp...@gmail.com> wrote: >> yes "sim-buffering=true" and "message-storage=sm". And also from what you >> said, you are not using the correct AT+CNMI value in your init-string. You >> will have to check the AT documentation of your modem manufacturer. The >> CNMI command is used by kannel to detect incoming SMS into the modem, so >> without it, you can't receive SMS. >> >> Hope it helps. >> >> Mfawa Alfred Onen >> >> On Wed, Nov 24, 2010 at 1:48 PM, Harbhag Singh Sohal >> <harbhag.so...@gmail.com> wrote: >>> >>> sim-buffering=true >>> >>> On Wed, Nov 24, 2010 at 6:11 PM, Mfawa Alfred Onen >>> <muffycomp...@gmail.com> wrote: >>> > OK it looks like the modem supports the command. Well there are >>> > somethings >>> > you still need to try. >>> > >>> > 1) Read about "sim-buffering" in UG >>> > 2) You can also try playing with your init-string containing the >>> > "AT+CNMI". >>> > >>> > Mfawa Alfred Onen >>> > >>> > >>> > On Wed, Nov 24, 2010 at 1:17 PM, Mfawa Alfred Onen >>> > <muffycomp...@gmail.com> >>> > wrote: >>> >> >>> >> Milan is right, try doing a "man minicom". You can also do a google on >>> >> minicom. The most importing thing you need to know is: >>> >> >>> >> 1) the AT driver (e.g AT or AT15200) >>> >> 2) the port (e.g /dev/ttyACM* or /dev/ttyUSB*) >>> >> 3) the speed (which you have already gotten from wvdial) >>> >> >>> >> Once you set it right, you should be able to log into the console (AT >>> >> interface). When you are in, just issue "AT+CPMS=?" >>> >> >>> >> Mfawa Alfred Onen >>> >> >>> >> On Wed, Nov 24, 2010 at 1:07 PM, Milan P. Stanic <m...@arvanta.net> >>> >> wrote: >>> >>> >>> >>> On Wed, 2010-11-24 at 17:27, Harbhag Singh Sohal wrote: >>> >>> > How can I use the minicom ? I installed it using apt-get on ubuntu. >>> >>> > I >>> >>> > never used minicom before. can you please explain how can I issue >>> >>> > the >>> >>> > following command ? >>> >>> >>> >>> Did you tried "man minicom"? No? ;-) >>> >>> >>> >>> N.B. It is strange a little bit that you can write "Best Lightweight >>> >>> Applications for Linux ." and you can't remember man application. >>> >>> >>> >>> > On Wed, Nov 24, 2010 at 5:16 PM, Mfawa Alfred Onen >>> >>> > <muffycomp...@gmail.com> wrote: >>> >>> > > The problem is right infront of you. It seems your modem does not >>> >>> > > support >>> >>> > > the "AT+CPMS" command. Try using minicom and issue the command >>> >>> > > "AT+CPMS=?". >>> >>> > > >>> >>> > > Mfawa Alfred Onen >>> >>> > > >>> >>> > > >>> >>> > > On Wed, Nov 24, 2010 at 12:35 PM, Harbhag Singh Sohal >>> >>> > > <harbhag.so...@gmail.com> wrote: >>> >>> > >> >>> >>> > >> udo bearerbox -v 0 /etc/kannel/kannel.conf >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Debug_lvl = 0, log_file = >>> >>> > >> <none>, >>> >>> > >> log_lvl = 0 >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR using storage type: >>> >>> > >> internal >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Kannel bearerbox version >>> >>> > >> `svn-r4871'. >>> >>> > >> Build `Nov 24 2010 16:03:03', compiler `4.4.3'. >>> >>> > >> System Linux, release 2.6.32-26-generic, version #47-Ubuntu SMP >>> >>> > >> Wed >>> >>> > >> Nov 17 15:58:05 UTC 2010, machine x86_64. >>> >>> > >> Hostname harbhag, IP 192.168.1.88. >>> >>> > >> Libxml version 2.7.6. >>> >>> > >> Compiled with MySQL 5.1.41, using MySQL 5.1.41. >>> >>> > >> Using native malloc. >>> >>> > >> >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Added logfile >>> >>> > >> `/var/log/kannel/bearerbox.log' with level `1'. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Started access logfile >>> >>> > >> `/var/log/kannel/access.log'. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SSL not supported, no SSL >>> >>> > >> initialization done. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: HTTP: Opening server at port >>> >>> > >> 13015. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 1 >>> >>> > >> (gwlib/fdset.c:poller) >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 2 >>> >>> > >> (gwlib/http.c:server_thread) >>> >>> > >> 2010-11-24 16:58:42 [3045] [1] DEBUG: Thread 1 >>> >>> > >> (gwlib/fdset.c:poller) >>> >>> > >> maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: Thread 2 >>> >>> > >> (gwlib/http.c:server_thread) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [3] DEBUG: Thread 3 >>> >>> > >> (gw/bb_http.c:httpadmin_run) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 3 >>> >>> > >> (gw/bb_http.c:httpadmin_run) >>> >>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: HTTP: Including port 13015, >>> >>> > >> fd >>> >>> > >> 8 >>> >>> > >> for polling in server thread >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: starting smsbox connection >>> >>> > >> module >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: BOXC: 'smsbox-max-pending' >>> >>> > >> not >>> >>> > >> set, using default (100). >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 4 >>> >>> > >> (gw/bb_boxc.c:sms_to_smsboxes) >>> >>> > >> 2010-11-24 16:58:42 [3045] [4] DEBUG: Thread 4 >>> >>> > >> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 5 >>> >>> > >> (gw/bb_boxc.c:smsboxc_run) >>> >>> > >> 2010-11-24 16:58:42 [3045] [5] DEBUG: Thread 5 >>> >>> > >> (gw/bb_boxc.c:smsboxc_run) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Set SMS resend frequency to >>> >>> > >> 60 >>> >>> > >> seconds. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SMS resend retry set to >>> >>> > >> unlimited. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: MO concatenated message >>> >>> > >> handling >>> >>> > >> enabled >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR rerouting for smsc id >>> >>> > >> <MTK2> >>> >>> > >> disabled. >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: configuration >>> >>> > >> shows >>> >>> > >> modemtype <MTK2> >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Reading modem >>> >>> > >> definitions from </etc/kannel/kannel.conf> >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Found <1> modems >>> >>> > >> in >>> >>> > >> config >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: read modem >>> >>> > >> definition for >>> >>> > >> <MTK2> >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 6 >>> >>> > >> (gw/smsc/smsc_at.c:at2_device_thread) >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 7 >>> >>> > >> (gw/bb_smscconn.c:sms_router) >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: >>> >>> > >> ---------------------------------------- >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Kannel bearerbox II version >>> >>> > >> svn-r4871 starting >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: MAIN: Start-up done, >>> >>> > >> entering >>> >>> > >> mainloop >>> >>> > >> 2010-11-24 16:58:42 [3045] [7] DEBUG: Thread 7 >>> >>> > >> (gw/bb_smscconn.c:sms_router) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: Thread 6 >>> >>> > >> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3045. >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: trying to use >>> >>> > >> speed >>> >>> > >> <9600> from modem definition >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: opening device >>> >>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: start called >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened. >>> >>> > >> Telnet >>> >>> > >> mode = 0 >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 >>> >>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: --> ^M >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed is 9600 >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: opening device >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened. >>> >>> > >> Telnet >>> >>> > >> mode = 0 >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Logging in >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: init device >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- AT >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CNMI=2,1,2,2,0^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CPMS="SM"^M >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Generic error: >>> >>> > >> ERROR >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Initialization >>> >>> > >> of >>> >>> > >> device failed. Attempt #0 on -1 max. >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect >>> >>> > >> (retrying in 10 seconds). >>> >>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: opening device >>> >>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened. >>> >>> > >> Telnet >>> >>> > >> mode = 0 >>> >>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened >>> >>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: Logging in >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: init device >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY >>> >>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CNMI=2,1,2,2,0^M >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CPMS="SM"^M >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Generic error: >>> >>> > >> ERROR >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Initialization >>> >>> > >> of >>> >>> > >> device failed. Attempt #1 on -1 max. >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect >>> >>> > >> (retrying in 10 seconds). >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: opening device >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened. >>> >>> > >> Telnet >>> >>> > >> mode = 0 >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: Logging in >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: init device >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 >>> >>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CNMI=2,1,2,2,0^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CPMS="SM"^M >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Generic error: >>> >>> > >> ERROR >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Initialization >>> >>> > >> of >>> >>> > >> device failed. Attempt #2 on -1 max. >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect >>> >>> > >> (retrying in 10 seconds). >>> >>> > >> ^C2010-11-24 16:59:12 [3045] [0] WARNING: Killing signal or HTTP >>> >>> > >> admin >>> >>> > >> command received, shutting down... >>> >>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: Shutting down Kannel... >>> >>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down smsc >>> >>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: AT2[MTK2]: Shutting down >>> >>> > >> SMSCConn, >>> >>> > >> slow >>> >>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down udp >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: opening device >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened. >>> >>> > >> Telnet >>> >>> > >> mode = 0 >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: Logging in >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: init device >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- AT >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CNMI=2,1,2,2,0^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> >>> >>> > >> AT+CPMS="SM"^M >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Generic error: >>> >>> > >> ERROR >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Initialization >>> >>> > >> of >>> >>> > >> device failed. Attempt #3 on -1 max. >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device >>> >>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: Thread 6 >>> >>> > >> (gw/smsc/smsc_at.c:at2_device_thread) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [7] DEBUG: Thread 7 >>> >>> > >> (gw/bb_smscconn.c:sms_router) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [4] DEBUG: Thread 4 >>> >>> > >> (gw/bb_boxc.c:sms_to_smsboxes) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [5] DEBUG: Thread 5 >>> >>> > >> (gw/bb_boxc.c:smsboxc_run) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: All flow threads have died, >>> >>> > >> killing >>> >>> > >> core >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Waiting for 2 >>> >>> > >> (gwlib/http.c:server_thread) to terminate >>> >>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: HTTP: No clients with >>> >>> > >> requests, >>> >>> > >> quitting. >>> >>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: Thread 3 >>> >>> > >> (gw/bb_http.c:httpadmin_run) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [2] DEBUG: Thread 2 >>> >>> > >> (gwlib/http.c:server_thread) terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [1] DEBUG: Thread 1 >>> >>> > >> (gwlib/fdset.c:poller) >>> >>> > >> terminates. >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: final clean-up for SMSCConn >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: MO concatenated message >>> >>> > >> handling >>> >>> > >> cleaned up >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total WDP messages: received >>> >>> > >> 0, >>> >>> > >> sent >>> >>> > >> 0 >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total SMS messages: received >>> >>> > >> 0, >>> >>> > >> dlr 0, sent 0, dlr 0 >>> >>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Immutable octet strings: >>> >>> > >> 286. >>> >>> > >> >>> >>> > >> >>> >>> > >> Below are config files. and output of wvdialconf >>> >>> > >> >>> >>> > >> KANNEL.CONF >>> >>> > >> >>> >>> > >> #Sample configuration file for Kannel bearerbox on Debian. >>> >>> > >> # See the documentation for explanations of fields. >>> >>> > >> # >>> >>> > >> >>> >>> > >> # HTTP administration is disabled by default. Make sure you set >>> >>> > >> the >>> >>> > >> # password if you enable it. >>> >>> > >> >>> >>> > >> group = core >>> >>> > >> admin-port = 13015 >>> >>> > >> admin-password = hard2guess >>> >>> > >> admin-deny-ip = "*.*.*.*" >>> >>> > >> admin-allow-ip = "127.0.0.1" >>> >>> > >> dlr-storage = internal >>> >>> > >> smsbox-port = 13016 >>> >>> > >> #wdp-interface-name = "*" >>> >>> > >> log-file = "/var/log/kannel/bearerbox.log" >>> >>> > >> access-log = "/var/log/kannel/access.log" >>> >>> > >> box-deny-ip = "*.*.*.*" >>> >>> > >> box-allow-ip = "127.0.0.1" >>> >>> > >> log-level = 1 >>> >>> > >> >>> >>> > >> #group = wapbox >>> >>> > >> #bearerbox-host = localhost >>> >>> > >> #log-file = "/var/log/kannel/wapbox.log" >>> >>> > >> >>> >>> > >> group = smsc >>> >>> > >> smsc-id = MTK2 >>> >>> > >> smsc = at >>> >>> > >> modemtype = MTK2 >>> >>> > >> device= /dev/ttyACM0 >>> >>> > >> my-number = +919417212503 >>> >>> > >> connect-allow-ip = 127.0.0.1 >>> >>> > >> log-level = 0 >>> >>> > >> >>> >>> > >> >>> >>> > >> group = modems >>> >>> > >> id = MediaTek >>> >>> > >> name = "MTK2" >>> >>> > >> detect-string = "MTK2" >>> >>> > >> init-string = "ATZ" >>> >>> > >> init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >>> >>> > >> init-string = "AT+CNMI=2,1,2,2,0" >>> >>> > >> message-storage = sm >>> >>> > >> #speed = 460800 >>> >>> > >> #message-start = 0 >>> >>> > >> >>> >>> > >> group = smsbox >>> >>> > >> smsbox-id = mysmsc >>> >>> > >> bearerbox-host = localhost >>> >>> > >> #bearerbox-port = 13018 >>> >>> > >> sendsms-port = 13018 >>> >>> > >> global-sender = *************** >>> >>> > >> access-log = "/var/log/kannel/smsbox-access.log" >>> >>> > >> log-file = "/var/log/kannel/smsbox.log" >>> >>> > >> log-level = 0 >>> >>> > >> mo-recode = true >>> >>> > >> >>> >>> > >> group = sendsms-user >>> >>> > >> username = *************** >>> >>> > >> password = hard2guess >>> >>> > >> concatenation= true >>> >>> > >> max-messages = 10000 >>> >>> > >> >>> >>> > >> group = sms-service >>> >>> > >> keyword-regex = .* >>> >>> > >> catch-all = yes >>> >>> > >> accepted-smsc = MTK2 >>> >>> > >> max-messages = 3 >>> >>> > >> get-url = "http://localhost/sms.php?phone=%p&text=%a"; >>> >>> > >> >>> >>> > >> SQLBOX.CONF >>> >>> > >> >>> >>> > >> group = sqlbox >>> >>> > >> id = sqlbox-db >>> >>> > >> smsbox-id = mysmsc >>> >>> > >> global-sender = "***************" >>> >>> > >> bearerbox-host = localhost >>> >>> > >> bearerbox-port = 13016 >>> >>> > >> smsbox-port = 13017 >>> >>> > >> smsbox-port-ssl = false >>> >>> > >> sql-log-table = sent_sms >>> >>> > >> sql-insert-table = send_sms >>> >>> > >> log-file = "/var/log/kannel/kannel-sqlbox.log" >>> >>> > >> log-level = 0 >>> >>> > >> #ssl-client-certkey-file = "" >>> >>> > >> #ssl-server-cert-file = "" >>> >>> > >> #ssl-server-key-file = "" >>> >>> > >> #ssl-trusted-ca-file = "" >>> >>> > >> >>> >>> > >> # Database connection examples. Please uncomment as needed >>> >>> > >> >>> >>> > >> # Example MYSQL Connection >>> >>> > >> group = mysql-connection >>> >>> > >> id = sqlbox-db >>> >>> > >> host = localhost >>> >>> > >> username = *************** >>> >>> > >> password = *************** >>> >>> > >> database = kannel >>> >>> > >> >>> >>> > >> # Example ORACLE Connection >>> >>> > >> #group = oracle-connection >>> >>> > >> #id = sqlbox-db >>> >>> > >> #username = myuser >>> >>> > >> #password = mypass >>> >>> > >> #tnsname = //localhost:1521/XE >>> >>> > >> >>> >>> > >> # Example POSTGRESQL Connection >>> >>> > >> #group = pgsql-connection >>> >>> > >> #id = sqlbox-db >>> >>> > >> #id = sqlbox-db >>> >>> > >> #username = myuser >>> >>> > >> #password = mypass >>> >>> > >> #database = kannel >>> >>> > >> #host = localhost >>> >>> > >> >>> >>> > >> # Example SDB Connection with some database URL examples >>> >>> > >> # *** Note: Uncomment only _one_ "url" line *** >>> >>> > >> #group = sdb-connection >>> >>> > >> #id = sqlbox-db >>> >>> > >> #url = mysql:host=localhost:db=kannel:uid=myuser:pwd=mypass >>> >>> > >> #url = sqlite:db=/path/to/kannel.db >>> >>> > >> #url = sqlite3:db=/path/to/kannel3.db >>> >>> > >> >>> >>> > >> # Example SQLITE 2 Connection >>> >>> > >> #group = sqlite-connection >>> >>> > >> #id = sqlbox-db >>> >>> > >> #database = /path/to/kannel.db >>> >>> > >> #max-connections = 1 >>> >>> > >> >>> >>> > >> # Example SQLITE 3 Connection >>> >>> > >> #group = sqlite3-connection >>> >>> > >> #id = sqlbox-db >>> >>> > >> #database = /path/to/kannel.db >>> >>> > >> #max-connections = 1 >>> >>> > >> >>> >>> > >> >>> >>> > >> Output of wvdialconf >>> >>> > >> >>> >>> > >> >>> >>> > >> sudo wvdialconf >>> >>> > >> Editing `/etc/wvdial.conf'. >>> >>> > >> >>> >>> > >> Scanning your serial ports for a modem. >>> >>> > >> >>> >>> > >> Modem Port Scan<*1>: S0 S1 S2 S3 >>> >>> > >> WvModem<*1>: Cannot get information for serial port. >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 -- OK >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>> >>> > >> ttyACM0<*1>: Modem Identifier: ATI -- MTK2 >>> >>> > >> ttyACM0<*1>: Speed 4800: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 9600: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 19200: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 38400: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 57600: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 115200: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 230400: AT -- OK >>> >>> > >> ttyACM0<*1>: Speed 460800: AT -- OK >>> >>> > >> ttyACM0<*1>: Max speed is 460800; that should be safe. >>> >>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>> >>> > >> >>> >>> > >> Found an USB modem on /dev/ttyACM0. >>> >>> > >> Modem configuration written to /etc/wvdial.conf. >>> >>> > >> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>> >>> > >> +FCLASS=0" >>> >>> > >> >>> >>> > > >>> >>> > > >>> >>> > >>> >>> > >>> >>> > >>> >>> > -- >>> >>> > Harbhag Singh Sohal >>> >>> > Department of Information Technology >>> >>> > Guru Nanak Dev Engineering College, Ludhiana >>> >>> > >>> >>> > Webpage : http://harbhag.wordpress.com >>> >>> > Twitter : http://twitter.com/harbhag >>> >>> > >>> >>> >>> >>> -- >>> >>> Kind regards, Milan >>> >>> -------------------------------------------------- >>> >>> Arvanta, IT Security http://www.arvanta.net >>> >>> Please do not send me e-mail containing HTML code. >>> >>> >>> >> >>> > >>> > >>> >>> >>> >>> -- >>> Harbhag Singh Sohal >>> Department of Information Technology >>> Guru Nanak Dev Engineering College, Ludhiana >>> >>> Webpage : http://harbhag.wordpress.com >>> Twitter : http://twitter.com/harbhag >> >> > > > > -- > Harbhag Singh Sohal > Department of Information Technology > Guru Nanak Dev Engineering College, Ludhiana > > Webpage : http://harbhag.wordpress.com > Twitter : http://twitter.com/harbhag > -- Harbhag Singh Sohal Department of Information Technology Guru Nanak Dev Engineering College, Ludhiana Webpage : http://harbhag.wordpress.com Twitter : http://twitter.com/harbhag
