udo bearerbox -v 0 /etc/kannel/kannel.conf 2010-11-24 16:58:42 [3045] [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0 2010-11-24 16:58:42 [3045] [0] INFO: DLR using storage type: internal 2010-11-24 16:58:42 [3045] [0] DEBUG: Kannel bearerbox version `svn-r4871'. Build `Nov 24 2010 16:03:03', compiler `4.4.3'. System Linux, release 2.6.32-26-generic, version #47-Ubuntu SMP Wed Nov 17 15:58:05 UTC 2010, machine x86_64. Hostname harbhag, IP 192.168.1.88. Libxml version 2.7.6. Compiled with MySQL 5.1.41, using MySQL 5.1.41. Using native malloc.
2010-11-24 16:58:42 [3045] [0] INFO: Added logfile `/var/log/kannel/bearerbox.log' with level `1'. 2010-11-24 16:58:42 [3045] [0] INFO: Started access logfile `/var/log/kannel/access.log'. 2010-11-24 16:58:42 [3045] [0] INFO: SSL not supported, no SSL initialization done. 2010-11-24 16:58:42 [3045] [0] INFO: HTTP: Opening server at port 13015. 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2010-11-24 16:58:42 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 3045. 2010-11-24 16:58:42 [3045] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 3045. 2010-11-24 16:58:42 [3045] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 3045. 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2010-11-24 16:58:42 [3045] [2] DEBUG: HTTP: Including port 13015, fd 8 for polling in server thread 2010-11-24 16:58:42 [3045] [0] DEBUG: starting smsbox connection module 2010-11-24 16:58:42 [3045] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2010-11-24 16:58:42 [3045] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 3045. 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2010-11-24 16:58:42 [3045] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 3045. 2010-11-24 16:58:42 [3045] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-11-24 16:58:42 [3045] [0] INFO: SMS resend retry set to unlimited. 2010-11-24 16:58:42 [3045] [0] DEBUG: MO concatenated message handling enabled 2010-11-24 16:58:42 [3045] [0] INFO: DLR rerouting for smsc id <MTK2> disabled. 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: configuration shows modemtype <MTK2> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Reading modem definitions from </etc/kannel/kannel.conf> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Found <1> modems in config 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: read modem definition for <MTK2> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2010-11-24 16:58:42 [3045] [0] INFO: ---------------------------------------- 2010-11-24 16:58:42 [3045] [0] INFO: Kannel bearerbox II version svn-r4871 starting 2010-11-24 16:58:42 [3045] [0] INFO: MAIN: Start-up done, entering mainloop 2010-11-24 16:58:42 [3045] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 3045. 2010-11-24 16:58:42 [3045] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3045. 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: trying to use speed <9600> from modem definition 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: opening device 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: start called 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened. Telnet mode = 0 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: --> ^M 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed is 9600 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: opening device 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened. Telnet mode = 0 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Logging in 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: init device 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- AT 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CNMI=2,1,2,2,0^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Initialization of device failed. Attempt #0 on -1 max. 2010-11-24 16:58:46 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect (retrying in 10 seconds). 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: opening device 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened. Telnet mode = 0 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: Logging in 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: init device 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CNMI=2,1,2,2,0^M 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Initialization of device failed. Attempt #1 on -1 max. 2010-11-24 16:58:58 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect (retrying in 10 seconds). 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: opening device 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened. Telnet mode = 0 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: Logging in 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: init device 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CNMI=2,1,2,2,0^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Initialization of device failed. Attempt #2 on -1 max. 2010-11-24 16:59:09 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect (retrying in 10 seconds). ^C2010-11-24 16:59:12 [3045] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-11-24 16:59:12 [3045] [0] DEBUG: Shutting down Kannel... 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down smsc 2010-11-24 16:59:12 [3045] [0] DEBUG: AT2[MTK2]: Shutting down SMSCConn, slow 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down udp 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: opening device 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened. Telnet mode = 0 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: Logging in 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: init device 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: speed set to 9600 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- AT 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CNMI=2,1,2,2,0^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1) 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Initialization of device failed. Attempt #3 on -1 max. 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device 2010-11-24 16:59:13 [3045] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) terminates. 2010-11-24 16:59:13 [3045] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) terminates. 2010-11-24 16:59:13 [3045] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) terminates. 2010-11-24 16:59:13 [3045] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) terminates. 2010-11-24 16:59:13 [3045] [0] INFO: All flow threads have died, killing core 2010-11-24 16:59:13 [3045] [0] DEBUG: Waiting for 2 (gwlib/http.c:server_thread) to terminate 2010-11-24 16:59:13 [3045] [3] DEBUG: HTTP: No clients with requests, quitting. 2010-11-24 16:59:13 [3045] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) terminates. 2010-11-24 16:59:13 [3045] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) terminates. 2010-11-24 16:59:13 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) terminates. 2010-11-24 16:59:13 [3045] [0] DEBUG: final clean-up for SMSCConn 2010-11-24 16:59:13 [3045] [0] DEBUG: MO concatenated message handling cleaned up 2010-11-24 16:59:13 [3045] [0] INFO: Total WDP messages: received 0, sent 0 2010-11-24 16:59:13 [3045] [0] INFO: Total SMS messages: received 0, dlr 0, sent 0, dlr 0 2010-11-24 16:59:13 [3045] [0] DEBUG: Immutable octet strings: 286. Below are config files. and output of wvdialconf KANNEL.CONF #Sample configuration file for Kannel bearerbox on Debian. # See the documentation for explanations of fields. # # HTTP administration is disabled by default. Make sure you set the # password if you enable it. group = core admin-port = 13015 admin-password = hard2guess admin-deny-ip = "*.*.*.*" admin-allow-ip = "127.0.0.1" dlr-storage = internal smsbox-port = 13016 #wdp-interface-name = "*" log-file = "/var/log/kannel/bearerbox.log" access-log = "/var/log/kannel/access.log" box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" log-level = 1 #group = wapbox #bearerbox-host = localhost #log-file = "/var/log/kannel/wapbox.log" group = smsc smsc-id = MTK2 smsc = at modemtype = MTK2 device= /dev/ttyACM0 my-number = +919417212503 connect-allow-ip = 127.0.0.1 log-level = 0 group = modems id = MediaTek name = "MTK2" detect-string = "MTK2" init-string = "ATZ" init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" init-string = "AT+CNMI=2,1,2,2,0" message-storage = sm #speed = 460800 #message-start = 0 group = smsbox smsbox-id = mysmsc bearerbox-host = localhost #bearerbox-port = 13018 sendsms-port = 13018 global-sender = *************** access-log = "/var/log/kannel/smsbox-access.log" log-file = "/var/log/kannel/smsbox.log" log-level = 0 mo-recode = true group = sendsms-user username = *************** password = hard2guess concatenation= true max-messages = 10000 group = sms-service keyword-regex = .* catch-all = yes accepted-smsc = MTK2 max-messages = 3 get-url = "http://localhost/sms.php?phone=%p&text=%a"; SQLBOX.CONF group = sqlbox id = sqlbox-db smsbox-id = mysmsc global-sender = "***************" bearerbox-host = localhost bearerbox-port = 13016 smsbox-port = 13017 smsbox-port-ssl = false sql-log-table = sent_sms sql-insert-table = send_sms log-file = "/var/log/kannel/kannel-sqlbox.log" log-level = 0 #ssl-client-certkey-file = "" #ssl-server-cert-file = "" #ssl-server-key-file = "" #ssl-trusted-ca-file = "" # Database connection examples. Please uncomment as needed # Example MYSQL Connection group = mysql-connection id = sqlbox-db host = localhost username = *************** password = *************** database = kannel # Example ORACLE Connection #group = oracle-connection #id = sqlbox-db #username = myuser #password = mypass #tnsname = //localhost:1521/XE # Example POSTGRESQL Connection #group = pgsql-connection #id = sqlbox-db #id = sqlbox-db #username = myuser #password = mypass #database = kannel #host = localhost # Example SDB Connection with some database URL examples # *** Note: Uncomment only _one_ "url" line *** #group = sdb-connection #id = sqlbox-db #url = mysql:host=localhost:db=kannel:uid=myuser:pwd=mypass #url = sqlite:db=/path/to/kannel.db #url = sqlite3:db=/path/to/kannel3.db # Example SQLITE 2 Connection #group = sqlite-connection #id = sqlbox-db #database = /path/to/kannel.db #max-connections = 1 # Example SQLITE 3 Connection #group = sqlite3-connection #id = sqlbox-db #database = /path/to/kannel.db #max-connections = 1 Output of wvdialconf sudo wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- MTK2 ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found an USB modem on /dev/ttyACM0. Modem configuration written to /etc/wvdial.conf. ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
