so what you think about this output ? Actually few weeks ago I used
the same phone to send messages using kannel and it worked without any
problem.
On Wed, Nov 24, 2010 at 5:53 PM, Harbhag Singh Sohal
<harbhag.so...@gmail.com> wrote:
> port is /dev/ttyACM0
> and output from the minicom console is below
> AT+CPMS=?
> +CPMS: ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P",
> "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT")
>
> OK
>
> On Wed, Nov 24, 2010 at 5:47 PM, Mfawa Alfred Onen
> <muffycomp...@gmail.com> wrote:
>> Milan is right, try doing a "man minicom". You can also do a google on
>> minicom. The most importing thing you need to know is:
>>
>> 1) the AT driver (e.g AT or AT15200)
>> 2) the port (e.g /dev/ttyACM* or /dev/ttyUSB*)
>> 3) the speed (which you have already gotten from wvdial)
>>
>> Once you set it right, you should be able to log into the console (AT
>> interface). When you are in, just issue "AT+CPMS=?"
>>
>> Mfawa Alfred Onen
>>
>> On Wed, Nov 24, 2010 at 1:07 PM, Milan P. Stanic <m...@arvanta.net> wrote:
>>>
>>> On Wed, 2010-11-24 at 17:27, Harbhag Singh Sohal wrote:
>>> > How can I use the minicom ? I installed it using apt-get on ubuntu. I
>>> > never used minicom before. can you please explain how can I issue the
>>> > following command ?
>>>
>>> Did you tried "man minicom"? No? ;-)
>>>
>>> N.B. It is strange a little bit that you can write "Best Lightweight
>>> Applications for Linux ." and you can't remember man application.
>>>
>>> > On Wed, Nov 24, 2010 at 5:16 PM, Mfawa Alfred Onen
>>> > <muffycomp...@gmail.com> wrote:
>>> > > The problem is right infront of you. It seems your modem does not
>>> > > support
>>> > > the "AT+CPMS" command. Try using minicom and issue the command
>>> > > "AT+CPMS=?".
>>> > >
>>> > > Mfawa Alfred Onen
>>> > >
>>> > >
>>> > > On Wed, Nov 24, 2010 at 12:35 PM, Harbhag Singh Sohal
>>> > > <harbhag.so...@gmail.com> wrote:
>>> > >>
>>> > >> udo bearerbox -v 0 /etc/kannel/kannel.conf
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Debug_lvl = 0, log_file =
>>> > >> <none>,
>>> > >> log_lvl = 0
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR using storage type: internal
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Kannel bearerbox version
>>> > >> `svn-r4871'.
>>> > >> Build `Nov 24 2010 16:03:03', compiler `4.4.3'.
>>> > >> System Linux, release 2.6.32-26-generic, version #47-Ubuntu SMP Wed
>>> > >> Nov 17 15:58:05 UTC 2010, machine x86_64.
>>> > >> Hostname harbhag, IP 192.168.1.88.
>>> > >> Libxml version 2.7.6.
>>> > >> Compiled with MySQL 5.1.41, using MySQL 5.1.41.
>>> > >> Using native malloc.
>>> > >>
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Added logfile
>>> > >> `/var/log/kannel/bearerbox.log' with level `1'.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Started access logfile
>>> > >> `/var/log/kannel/access.log'.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SSL not supported, no SSL
>>> > >> initialization done.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: HTTP: Opening server at port
>>> > >> 13015.
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 1
>>> > >> (gwlib/fdset.c:poller)
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 2
>>> > >> (gwlib/http.c:server_thread)
>>> > >> 2010-11-24 16:58:42 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
>>> > >> maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: Thread 2
>>> > >> (gwlib/http.c:server_thread) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [3] DEBUG: Thread 3
>>> > >> (gw/bb_http.c:httpadmin_run) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 3
>>> > >> (gw/bb_http.c:httpadmin_run)
>>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: HTTP: Including port 13015, fd
>>> > >> 8
>>> > >> for polling in server thread
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: starting smsbox connection
>>> > >> module
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: BOXC: 'smsbox-max-pending' not
>>> > >> set, using default (100).
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 4
>>> > >> (gw/bb_boxc.c:sms_to_smsboxes)
>>> > >> 2010-11-24 16:58:42 [3045] [4] DEBUG: Thread 4
>>> > >> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 5
>>> > >> (gw/bb_boxc.c:smsboxc_run)
>>> > >> 2010-11-24 16:58:42 [3045] [5] DEBUG: Thread 5
>>> > >> (gw/bb_boxc.c:smsboxc_run) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Set SMS resend frequency to 60
>>> > >> seconds.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SMS resend retry set to
>>> > >> unlimited.
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: MO concatenated message
>>> > >> handling
>>> > >> enabled
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR rerouting for smsc id <MTK2>
>>> > >> disabled.
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: configuration shows
>>> > >> modemtype <MTK2>
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Reading modem
>>> > >> definitions from </etc/kannel/kannel.conf>
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Found <1> modems in
>>> > >> config
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: read modem definition
>>> > >> for
>>> > >> <MTK2>
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 6
>>> > >> (gw/smsc/smsc_at.c:at2_device_thread)
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 7
>>> > >> (gw/bb_smscconn.c:sms_router)
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO:
>>> > >> ----------------------------------------
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Kannel bearerbox II version
>>> > >> svn-r4871 starting
>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: MAIN: Start-up done, entering
>>> > >> mainloop
>>> > >> 2010-11-24 16:58:42 [3045] [7] DEBUG: Thread 7
>>> > >> (gw/bb_smscconn.c:sms_router) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: Thread 6
>>> > >> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3045.
>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: trying to use speed
>>> > >> <9600> from modem definition
>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: opening device
>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: start called
>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>> > >> Telnet
>>> > >> mode = 0
>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: --> ^M
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed is 9600
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: opening device
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>> > >> Telnet
>>> > >> mode = 0
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Logging in
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: init device
>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: -->
>>> > >> AT+CNMI=2,1,2,2,0^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>> > >> device failed. Attempt #0 on -1 max.
>>> > >> 2010-11-24 16:58:46 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>> > >> (retrying in 10 seconds).
>>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: opening device
>>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>> > >> Telnet
>>> > >> mode = 0
>>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: Logging in
>>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: init device
>>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: -->
>>> > >> AT+CNMI=2,1,2,2,0^M
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>> > >> device failed. Attempt #1 on -1 max.
>>> > >> 2010-11-24 16:58:58 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>> > >> (retrying in 10 seconds).
>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: opening device
>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>> > >> Telnet
>>> > >> mode = 0
>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: Logging in
>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: init device
>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: -->
>>> > >> AT+CNMI=2,1,2,2,0^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>> > >> device failed. Attempt #2 on -1 max.
>>> > >> 2010-11-24 16:59:09 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>> > >> (retrying in 10 seconds).
>>> > >> ^C2010-11-24 16:59:12 [3045] [0] WARNING: Killing signal or HTTP
>>> > >> admin
>>> > >> command received, shutting down...
>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: Shutting down Kannel...
>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down smsc
>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: AT2[MTK2]: Shutting down
>>> > >> SMSCConn,
>>> > >> slow
>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down udp
>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: opening device
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>> > >> Telnet
>>> > >> mode = 0
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: Logging in
>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: init device
>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: -->
>>> > >> AT+CNMI=2,1,2,2,0^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>> > >> device failed. Attempt #3 on -1 max.
>>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device
>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: Thread 6
>>> > >> (gw/smsc/smsc_at.c:at2_device_thread) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [7] DEBUG: Thread 7
>>> > >> (gw/bb_smscconn.c:sms_router) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [4] DEBUG: Thread 4
>>> > >> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [5] DEBUG: Thread 5
>>> > >> (gw/bb_boxc.c:smsboxc_run) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: All flow threads have died,
>>> > >> killing
>>> > >> core
>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Waiting for 2
>>> > >> (gwlib/http.c:server_thread) to terminate
>>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: HTTP: No clients with requests,
>>> > >> quitting.
>>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: Thread 3
>>> > >> (gw/bb_http.c:httpadmin_run) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [2] DEBUG: Thread 2
>>> > >> (gwlib/http.c:server_thread) terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
>>> > >> terminates.
>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: final clean-up for SMSCConn
>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: MO concatenated message
>>> > >> handling
>>> > >> cleaned up
>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total WDP messages: received 0,
>>> > >> sent
>>> > >> 0
>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total SMS messages: received 0,
>>> > >> dlr 0, sent 0, dlr 0
>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Immutable octet strings: 286.
>>> > >>
>>> > >>
>>> > >> Below are config files. and output of wvdialconf
>>> > >>
>>> > >> KANNEL.CONF
>>> > >>
>>> > >> #Sample configuration file for Kannel bearerbox on Debian.
>>> > >> # See the documentation for explanations of fields.
>>> > >> #
>>> > >>
>>> > >> # HTTP administration is disabled by default. Make sure you set the
>>> > >> # password if you enable it.
>>> > >>
>>> > >> group = core
>>> > >> admin-port = 13015
>>> > >> admin-password = hard2guess
>>> > >> admin-deny-ip = "*.*.*.*"
>>> > >> admin-allow-ip = "127.0.0.1"
>>> > >> dlr-storage = internal
>>> > >> smsbox-port = 13016
>>> > >> #wdp-interface-name = "*"
>>> > >> log-file = "/var/log/kannel/bearerbox.log"
>>> > >> access-log = "/var/log/kannel/access.log"
>>> > >> box-deny-ip = "*.*.*.*"
>>> > >> box-allow-ip = "127.0.0.1"
>>> > >> log-level = 1
>>> > >>
>>> > >> #group = wapbox
>>> > >> #bearerbox-host = localhost
>>> > >> #log-file = "/var/log/kannel/wapbox.log"
>>> > >>
>>> > >> group = smsc
>>> > >> smsc-id = MTK2
>>> > >> smsc = at
>>> > >> modemtype = MTK2
>>> > >> device= /dev/ttyACM0
>>> > >> my-number = +919417212503
>>> > >> connect-allow-ip = 127.0.0.1
>>> > >> log-level = 0
>>> > >>
>>> > >>
>>> > >> group = modems
>>> > >> id = MediaTek
>>> > >> name = "MTK2"
>>> > >> detect-string = "MTK2"
>>> > >> init-string = "ATZ"
>>> > >> init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>> > >> init-string = "AT+CNMI=2,1,2,2,0"
>>> > >> message-storage = sm
>>> > >> #speed = 460800
>>> > >> #message-start = 0
>>> > >>
>>> > >> group = smsbox
>>> > >> smsbox-id = mysmsc
>>> > >> bearerbox-host = localhost
>>> > >> #bearerbox-port = 13018
>>> > >> sendsms-port = 13018
>>> > >> global-sender = ***************
>>> > >> access-log = "/var/log/kannel/smsbox-access.log"
>>> > >> log-file = "/var/log/kannel/smsbox.log"
>>> > >> log-level = 0
>>> > >> mo-recode = true
>>> > >>
>>> > >> group = sendsms-user
>>> > >> username = ***************
>>> > >> password = hard2guess
>>> > >> concatenation= true
>>> > >> max-messages = 10000
>>> > >>
>>> > >> group = sms-service
>>> > >> keyword-regex = .*
>>> > >> catch-all = yes
>>> > >> accepted-smsc = MTK2
>>> > >> max-messages = 3
>>> > >> get-url = "http://localhost/sms.php?phone=%p&text=%a";
>>> > >>
>>> > >> SQLBOX.CONF
>>> > >>
>>> > >> group = sqlbox
>>> > >> id = sqlbox-db
>>> > >> smsbox-id = mysmsc
>>> > >> global-sender = "***************"
>>> > >> bearerbox-host = localhost
>>> > >> bearerbox-port = 13016
>>> > >> smsbox-port = 13017
>>> > >> smsbox-port-ssl = false
>>> > >> sql-log-table = sent_sms
>>> > >> sql-insert-table = send_sms
>>> > >> log-file = "/var/log/kannel/kannel-sqlbox.log"
>>> > >> log-level = 0
>>> > >> #ssl-client-certkey-file = ""
>>> > >> #ssl-server-cert-file = ""
>>> > >> #ssl-server-key-file = ""
>>> > >> #ssl-trusted-ca-file = ""
>>> > >>
>>> > >> # Database connection examples. Please uncomment as needed
>>> > >>
>>> > >> # Example MYSQL Connection
>>> > >> group = mysql-connection
>>> > >> id = sqlbox-db
>>> > >> host = localhost
>>> > >> username = ***************
>>> > >> password = ***************
>>> > >> database = kannel
>>> > >>
>>> > >> # Example ORACLE Connection
>>> > >> #group = oracle-connection
>>> > >> #id = sqlbox-db
>>> > >> #username = myuser
>>> > >> #password = mypass
>>> > >> #tnsname = //localhost:1521/XE
>>> > >>
>>> > >> # Example POSTGRESQL Connection
>>> > >> #group = pgsql-connection
>>> > >> #id = sqlbox-db
>>> > >> #id = sqlbox-db
>>> > >> #username = myuser
>>> > >> #password = mypass
>>> > >> #database = kannel
>>> > >> #host = localhost
>>> > >>
>>> > >> # Example SDB Connection with some database URL examples
>>> > >> # *** Note: Uncomment only _one_ "url" line ***
>>> > >> #group = sdb-connection
>>> > >> #id = sqlbox-db
>>> > >> #url = mysql:host=localhost:db=kannel:uid=myuser:pwd=mypass
>>> > >> #url = sqlite:db=/path/to/kannel.db
>>> > >> #url = sqlite3:db=/path/to/kannel3.db
>>> > >>
>>> > >> # Example SQLITE 2 Connection
>>> > >> #group = sqlite-connection
>>> > >> #id = sqlbox-db
>>> > >> #database = /path/to/kannel.db
>>> > >> #max-connections = 1
>>> > >>
>>> > >> # Example SQLITE 3 Connection
>>> > >> #group = sqlite3-connection
>>> > >> #id = sqlbox-db
>>> > >> #database = /path/to/kannel.db
>>> > >> #max-connections = 1
>>> > >>
>>> > >>
>>> > >> Output of wvdialconf
>>> > >>
>>> > >>
>>> > >> sudo wvdialconf
>>> > >> Editing `/etc/wvdial.conf'.
>>> > >>
>>> > >> Scanning your serial ports for a modem.
>>> > >>
>>> > >> Modem Port Scan<*1>: S0 S1 S2 S3
>>> > >> WvModem<*1>: Cannot get information for serial port.
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 -- OK
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> > >> ttyACM0<*1>: Modem Identifier: ATI -- MTK2
>>> > >> ttyACM0<*1>: Speed 4800: AT -- OK
>>> > >> ttyACM0<*1>: Speed 9600: AT -- OK
>>> > >> ttyACM0<*1>: Speed 19200: AT -- OK
>>> > >> ttyACM0<*1>: Speed 38400: AT -- OK
>>> > >> ttyACM0<*1>: Speed 57600: AT -- OK
>>> > >> ttyACM0<*1>: Speed 115200: AT -- OK
>>> > >> ttyACM0<*1>: Speed 230400: AT -- OK
>>> > >> ttyACM0<*1>: Speed 460800: AT -- OK
>>> > >> ttyACM0<*1>: Max speed is 460800; that should be safe.
>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> > >>
>>> > >> Found an USB modem on /dev/ttyACM0.
>>> > >> Modem configuration written to /etc/wvdial.conf.
>>> > >> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>> > >>
>>> > >
>>> > >
>>> >
>>> >
>>> >
>>> > --
>>> > Harbhag Singh Sohal
>>> > Department of Information Technology
>>> > Guru Nanak Dev Engineering College, Ludhiana
>>> >
>>> > Webpage : http://harbhag.wordpress.com
>>> > Twitter : http://twitter.com/harbhag
>>> >
>>>
>>> --
>>> Kind regards, Milan
>>> --------------------------------------------------
>>> Arvanta, IT Security http://www.arvanta.net
>>> Please do not send me e-mail containing HTML code.
>>>
>>
>>
>
>
>
> --
> Harbhag Singh Sohal
> Department of Information Technology
> Guru Nanak Dev Engineering College, Ludhiana
>
> Webpage : http://harbhag.wordpress.com
> Twitter : http://twitter.com/harbhag
>
--
Harbhag Singh Sohal
Department of Information Technology
Guru Nanak Dev Engineering College, Ludhiana
Webpage : http://harbhag.wordpress.com
Twitter : http://twitter.com/harbhag
