I commented the below parameter in kannel.conf and it got connected successfully
#init-string = "AT+CNMI=2,1,2,2,0"
but can I receive SMS without it ?
On Wed, Nov 24, 2010 at 6:02 PM, Harbhag Singh Sohal
<harbhag.so...@gmail.com> wrote:
> so what you think about this output ? Actually few weeks ago I used
> the same phone to send messages using kannel and it worked without any
> problem.
>
> On Wed, Nov 24, 2010 at 5:53 PM, Harbhag Singh Sohal
> <harbhag.so...@gmail.com> wrote:
>> port is /dev/ttyACM0
>> and output from the minicom console is below
>> AT+CPMS=?
>> +CPMS: ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P",
>> "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT")
>>
>> OK
>>
>> On Wed, Nov 24, 2010 at 5:47 PM, Mfawa Alfred Onen
>> <muffycomp...@gmail.com> wrote:
>>> Milan is right, try doing a "man minicom". You can also do a google on
>>> minicom. The most importing thing you need to know is:
>>>
>>> 1) the AT driver (e.g AT or AT15200)
>>> 2) the port (e.g /dev/ttyACM* or /dev/ttyUSB*)
>>> 3) the speed (which you have already gotten from wvdial)
>>>
>>> Once you set it right, you should be able to log into the console (AT
>>> interface). When you are in, just issue "AT+CPMS=?"
>>>
>>> Mfawa Alfred Onen
>>>
>>> On Wed, Nov 24, 2010 at 1:07 PM, Milan P. Stanic <m...@arvanta.net> wrote:
>>>>
>>>> On Wed, 2010-11-24 at 17:27, Harbhag Singh Sohal wrote:
>>>> > How can I use the minicom ? I installed it using apt-get on ubuntu. I
>>>> > never used minicom before. can you please explain how can I issue the
>>>> > following command ?
>>>>
>>>> Did you tried "man minicom"? No? ;-)
>>>>
>>>> N.B. It is strange a little bit that you can write "Best Lightweight
>>>> Applications for Linux ." and you can't remember man application.
>>>>
>>>> > On Wed, Nov 24, 2010 at 5:16 PM, Mfawa Alfred Onen
>>>> > <muffycomp...@gmail.com> wrote:
>>>> > > The problem is right infront of you. It seems your modem does not
>>>> > > support
>>>> > > the "AT+CPMS" command. Try using minicom and issue the command
>>>> > > "AT+CPMS=?".
>>>> > >
>>>> > > Mfawa Alfred Onen
>>>> > >
>>>> > >
>>>> > > On Wed, Nov 24, 2010 at 12:35 PM, Harbhag Singh Sohal
>>>> > > <harbhag.so...@gmail.com> wrote:
>>>> > >>
>>>> > >> udo bearerbox -v 0 /etc/kannel/kannel.conf
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Debug_lvl = 0, log_file =
>>>> > >> <none>,
>>>> > >> log_lvl = 0
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR using storage type: internal
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Kannel bearerbox version
>>>> > >> `svn-r4871'.
>>>> > >> Build `Nov 24 2010 16:03:03', compiler `4.4.3'.
>>>> > >> System Linux, release 2.6.32-26-generic, version #47-Ubuntu SMP Wed
>>>> > >> Nov 17 15:58:05 UTC 2010, machine x86_64.
>>>> > >> Hostname harbhag, IP 192.168.1.88.
>>>> > >> Libxml version 2.7.6.
>>>> > >> Compiled with MySQL 5.1.41, using MySQL 5.1.41.
>>>> > >> Using native malloc.
>>>> > >>
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Added logfile
>>>> > >> `/var/log/kannel/bearerbox.log' with level `1'.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Started access logfile
>>>> > >> `/var/log/kannel/access.log'.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SSL not supported, no SSL
>>>> > >> initialization done.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: HTTP: Opening server at port
>>>> > >> 13015.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 1
>>>> > >> (gwlib/fdset.c:poller)
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 2
>>>> > >> (gwlib/http.c:server_thread)
>>>> > >> 2010-11-24 16:58:42 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
>>>> > >> maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: Thread 2
>>>> > >> (gwlib/http.c:server_thread) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [3] DEBUG: Thread 3
>>>> > >> (gw/bb_http.c:httpadmin_run) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 3
>>>> > >> (gw/bb_http.c:httpadmin_run)
>>>> > >> 2010-11-24 16:58:42 [3045] [2] DEBUG: HTTP: Including port 13015, fd
>>>> > >> 8
>>>> > >> for polling in server thread
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: starting smsbox connection
>>>> > >> module
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: BOXC: 'smsbox-max-pending' not
>>>> > >> set, using default (100).
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 4
>>>> > >> (gw/bb_boxc.c:sms_to_smsboxes)
>>>> > >> 2010-11-24 16:58:42 [3045] [4] DEBUG: Thread 4
>>>> > >> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 5
>>>> > >> (gw/bb_boxc.c:smsboxc_run)
>>>> > >> 2010-11-24 16:58:42 [3045] [5] DEBUG: Thread 5
>>>> > >> (gw/bb_boxc.c:smsboxc_run) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Set SMS resend frequency to 60
>>>> > >> seconds.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: SMS resend retry set to
>>>> > >> unlimited.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: MO concatenated message
>>>> > >> handling
>>>> > >> enabled
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: DLR rerouting for smsc id <MTK2>
>>>> > >> disabled.
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: configuration shows
>>>> > >> modemtype <MTK2>
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Reading modem
>>>> > >> definitions from </etc/kannel/kannel.conf>
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: Found <1> modems in
>>>> > >> config
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: AT2[MTK2]: read modem definition
>>>> > >> for
>>>> > >> <MTK2>
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 6
>>>> > >> (gw/smsc/smsc_at.c:at2_device_thread)
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: Started thread 7
>>>> > >> (gw/bb_smscconn.c:sms_router)
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO:
>>>> > >> ----------------------------------------
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: Kannel bearerbox II version
>>>> > >> svn-r4871 starting
>>>> > >> 2010-11-24 16:58:42 [3045] [0] INFO: MAIN: Start-up done, entering
>>>> > >> mainloop
>>>> > >> 2010-11-24 16:58:42 [3045] [7] DEBUG: Thread 7
>>>> > >> (gw/bb_smscconn.c:sms_router) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: Thread 6
>>>> > >> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3045.
>>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: trying to use speed
>>>> > >> <9600> from modem definition
>>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: opening device
>>>> > >> 2010-11-24 16:58:42 [3045] [0] DEBUG: AT2[MTK2]: start called
>>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>>> > >> Telnet
>>>> > >> mode = 0
>>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>>> > >> 2010-11-24 16:58:42 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>>> > >> 2010-11-24 16:58:42 [3045] [6] DEBUG: AT2[MTK2]: --> ^M
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed is 9600
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: opening device
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>>> > >> Telnet
>>>> > >> mode = 0
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: Logging in
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: init device
>>>> > >> 2010-11-24 16:58:45 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:45 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: -->
>>>> > >> AT+CNMI=2,1,2,2,0^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>>> > >> 2010-11-24 16:58:46 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>>> > >> device failed. Attempt #0 on -1 max.
>>>> > >> 2010-11-24 16:58:46 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:58:46 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>>> > >> (retrying in 10 seconds).
>>>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: opening device
>>>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>>> > >> Telnet
>>>> > >> mode = 0
>>>> > >> 2010-11-24 16:58:56 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>>> > >> 2010-11-24 16:58:56 [3045] [6] INFO: AT2[MTK2]: Logging in
>>>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: init device
>>>> > >> 2010-11-24 16:58:57 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>>> > >> 2010-11-24 16:58:57 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: -->
>>>> > >> AT+CNMI=2,1,2,2,0^M
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>>> > >> 2010-11-24 16:58:58 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>>> > >> device failed. Attempt #1 on -1 max.
>>>> > >> 2010-11-24 16:58:58 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:58:58 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>>> > >> (retrying in 10 seconds).
>>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: opening device
>>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>>> > >> Telnet
>>>> > >> mode = 0
>>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: Logging in
>>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: init device
>>>> > >> 2010-11-24 16:59:08 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>>> > >> 2010-11-24 16:59:08 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: -->
>>>> > >> AT+CNMI=2,1,2,2,0^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>>> > >> 2010-11-24 16:59:09 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>>> > >> device failed. Attempt #2 on -1 max.
>>>> > >> 2010-11-24 16:59:09 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:59:09 [3045] [6] ERROR: AT2[MTK2]: Couldn't connect
>>>> > >> (retrying in 10 seconds).
>>>> > >> ^C2010-11-24 16:59:12 [3045] [0] WARNING: Killing signal or HTTP
>>>> > >> admin
>>>> > >> command received, shutting down...
>>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: Shutting down Kannel...
>>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down smsc
>>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: AT2[MTK2]: Shutting down
>>>> > >> SMSCConn,
>>>> > >> slow
>>>> > >> 2010-11-24 16:59:12 [3045] [0] DEBUG: shutting down udp
>>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: opening device
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened.
>>>> > >> Telnet
>>>> > >> mode = 0
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: device opened
>>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: Logging in
>>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: init device
>>>> > >> 2010-11-24 16:59:12 [3045] [6] INFO: AT2[MTK2]: speed set to 9600
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> ATZ^M
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT^M
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- AT
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:12 [3045] [6] DEBUG: AT2[MTK2]: --> AT&F^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- AT&F
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> ATE0^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ATE0
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+IFC=2,2^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPIN?^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CPIN: READY
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CMGF=0^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CSMS=?^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: -->
>>>> > >> AT+CNMI=2,1,2,2,0^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- +CSMS: (0,1)
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- OK
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: --> AT+CPMS="SM"^M
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: AT2[MTK2]: <-- ERROR
>>>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Generic error: ERROR
>>>> > >> 2010-11-24 16:59:13 [3045] [6] ERROR: AT2[MTK2]: Initialization of
>>>> > >> device failed. Attempt #3 on -1 max.
>>>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:59:13 [3045] [6] INFO: AT2[MTK2]: Closing device
>>>> > >> 2010-11-24 16:59:13 [3045] [6] DEBUG: Thread 6
>>>> > >> (gw/smsc/smsc_at.c:at2_device_thread) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [7] DEBUG: Thread 7
>>>> > >> (gw/bb_smscconn.c:sms_router) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [4] DEBUG: Thread 4
>>>> > >> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [5] DEBUG: Thread 5
>>>> > >> (gw/bb_boxc.c:smsboxc_run) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: All flow threads have died,
>>>> > >> killing
>>>> > >> core
>>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Waiting for 2
>>>> > >> (gwlib/http.c:server_thread) to terminate
>>>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: HTTP: No clients with requests,
>>>> > >> quitting.
>>>> > >> 2010-11-24 16:59:13 [3045] [3] DEBUG: Thread 3
>>>> > >> (gw/bb_http.c:httpadmin_run) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [2] DEBUG: Thread 2
>>>> > >> (gwlib/http.c:server_thread) terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
>>>> > >> terminates.
>>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: final clean-up for SMSCConn
>>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: MO concatenated message
>>>> > >> handling
>>>> > >> cleaned up
>>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total WDP messages: received 0,
>>>> > >> sent
>>>> > >> 0
>>>> > >> 2010-11-24 16:59:13 [3045] [0] INFO: Total SMS messages: received 0,
>>>> > >> dlr 0, sent 0, dlr 0
>>>> > >> 2010-11-24 16:59:13 [3045] [0] DEBUG: Immutable octet strings: 286.
>>>> > >>
>>>> > >>
>>>> > >> Below are config files. and output of wvdialconf
>>>> > >>
>>>> > >> KANNEL.CONF
>>>> > >>
>>>> > >> #Sample configuration file for Kannel bearerbox on Debian.
>>>> > >> # See the documentation for explanations of fields.
>>>> > >> #
>>>> > >>
>>>> > >> # HTTP administration is disabled by default. Make sure you set the
>>>> > >> # password if you enable it.
>>>> > >>
>>>> > >> group = core
>>>> > >> admin-port = 13015
>>>> > >> admin-password = hard2guess
>>>> > >> admin-deny-ip = "*.*.*.*"
>>>> > >> admin-allow-ip = "127.0.0.1"
>>>> > >> dlr-storage = internal
>>>> > >> smsbox-port = 13016
>>>> > >> #wdp-interface-name = "*"
>>>> > >> log-file = "/var/log/kannel/bearerbox.log"
>>>> > >> access-log = "/var/log/kannel/access.log"
>>>> > >> box-deny-ip = "*.*.*.*"
>>>> > >> box-allow-ip = "127.0.0.1"
>>>> > >> log-level = 1
>>>> > >>
>>>> > >> #group = wapbox
>>>> > >> #bearerbox-host = localhost
>>>> > >> #log-file = "/var/log/kannel/wapbox.log"
>>>> > >>
>>>> > >> group = smsc
>>>> > >> smsc-id = MTK2
>>>> > >> smsc = at
>>>> > >> modemtype = MTK2
>>>> > >> device= /dev/ttyACM0
>>>> > >> my-number = +919417212503
>>>> > >> connect-allow-ip = 127.0.0.1
>>>> > >> log-level = 0
>>>> > >>
>>>> > >>
>>>> > >> group = modems
>>>> > >> id = MediaTek
>>>> > >> name = "MTK2"
>>>> > >> detect-string = "MTK2"
>>>> > >> init-string = "ATZ"
>>>> > >> init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>>> > >> init-string = "AT+CNMI=2,1,2,2,0"
>>>> > >> message-storage = sm
>>>> > >> #speed = 460800
>>>> > >> #message-start = 0
>>>> > >>
>>>> > >> group = smsbox
>>>> > >> smsbox-id = mysmsc
>>>> > >> bearerbox-host = localhost
>>>> > >> #bearerbox-port = 13018
>>>> > >> sendsms-port = 13018
>>>> > >> global-sender = ***************
>>>> > >> access-log = "/var/log/kannel/smsbox-access.log"
>>>> > >> log-file = "/var/log/kannel/smsbox.log"
>>>> > >> log-level = 0
>>>> > >> mo-recode = true
>>>> > >>
>>>> > >> group = sendsms-user
>>>> > >> username = ***************
>>>> > >> password = hard2guess
>>>> > >> concatenation= true
>>>> > >> max-messages = 10000
>>>> > >>
>>>> > >> group = sms-service
>>>> > >> keyword-regex = .*
>>>> > >> catch-all = yes
>>>> > >> accepted-smsc = MTK2
>>>> > >> max-messages = 3
>>>> > >> get-url = "http://localhost/sms.php?phone=%p&text=%a";
>>>> > >>
>>>> > >> SQLBOX.CONF
>>>> > >>
>>>> > >> group = sqlbox
>>>> > >> id = sqlbox-db
>>>> > >> smsbox-id = mysmsc
>>>> > >> global-sender = "***************"
>>>> > >> bearerbox-host = localhost
>>>> > >> bearerbox-port = 13016
>>>> > >> smsbox-port = 13017
>>>> > >> smsbox-port-ssl = false
>>>> > >> sql-log-table = sent_sms
>>>> > >> sql-insert-table = send_sms
>>>> > >> log-file = "/var/log/kannel/kannel-sqlbox.log"
>>>> > >> log-level = 0
>>>> > >> #ssl-client-certkey-file = ""
>>>> > >> #ssl-server-cert-file = ""
>>>> > >> #ssl-server-key-file = ""
>>>> > >> #ssl-trusted-ca-file = ""
>>>> > >>
>>>> > >> # Database connection examples. Please uncomment as needed
>>>> > >>
>>>> > >> # Example MYSQL Connection
>>>> > >> group = mysql-connection
>>>> > >> id = sqlbox-db
>>>> > >> host = localhost
>>>> > >> username = ***************
>>>> > >> password = ***************
>>>> > >> database = kannel
>>>> > >>
>>>> > >> # Example ORACLE Connection
>>>> > >> #group = oracle-connection
>>>> > >> #id = sqlbox-db
>>>> > >> #username = myuser
>>>> > >> #password = mypass
>>>> > >> #tnsname = //localhost:1521/XE
>>>> > >>
>>>> > >> # Example POSTGRESQL Connection
>>>> > >> #group = pgsql-connection
>>>> > >> #id = sqlbox-db
>>>> > >> #id = sqlbox-db
>>>> > >> #username = myuser
>>>> > >> #password = mypass
>>>> > >> #database = kannel
>>>> > >> #host = localhost
>>>> > >>
>>>> > >> # Example SDB Connection with some database URL examples
>>>> > >> # *** Note: Uncomment only _one_ "url" line ***
>>>> > >> #group = sdb-connection
>>>> > >> #id = sqlbox-db
>>>> > >> #url = mysql:host=localhost:db=kannel:uid=myuser:pwd=mypass
>>>> > >> #url = sqlite:db=/path/to/kannel.db
>>>> > >> #url = sqlite3:db=/path/to/kannel3.db
>>>> > >>
>>>> > >> # Example SQLITE 2 Connection
>>>> > >> #group = sqlite-connection
>>>> > >> #id = sqlbox-db
>>>> > >> #database = /path/to/kannel.db
>>>> > >> #max-connections = 1
>>>> > >>
>>>> > >> # Example SQLITE 3 Connection
>>>> > >> #group = sqlite3-connection
>>>> > >> #id = sqlbox-db
>>>> > >> #database = /path/to/kannel.db
>>>> > >> #max-connections = 1
>>>> > >>
>>>> > >>
>>>> > >> Output of wvdialconf
>>>> > >>
>>>> > >>
>>>> > >> sudo wvdialconf
>>>> > >> Editing `/etc/wvdial.conf'.
>>>> > >>
>>>> > >> Scanning your serial ports for a modem.
>>>> > >>
>>>> > >> Modem Port Scan<*1>: S0 S1 S2 S3
>>>> > >> WvModem<*1>: Cannot get information for serial port.
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 -- OK
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>> > >> ttyACM0<*1>: Modem Identifier: ATI -- MTK2
>>>> > >> ttyACM0<*1>: Speed 4800: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 9600: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 19200: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 38400: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 57600: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 115200: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 230400: AT -- OK
>>>> > >> ttyACM0<*1>: Speed 460800: AT -- OK
>>>> > >> ttyACM0<*1>: Max speed is 460800; that should be safe.
>>>> > >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>> > >>
>>>> > >> Found an USB modem on /dev/ttyACM0.
>>>> > >> Modem configuration written to /etc/wvdial.conf.
>>>> > >> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>>> > >>
>>>> > >
>>>> > >
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Harbhag Singh Sohal
>>>> > Department of Information Technology
>>>> > Guru Nanak Dev Engineering College, Ludhiana
>>>> >
>>>> > Webpage : http://harbhag.wordpress.com
>>>> > Twitter : http://twitter.com/harbhag
>>>> >
>>>>
>>>> --
>>>> Kind regards, Milan
>>>> --------------------------------------------------
>>>> Arvanta, IT Security http://www.arvanta.net
>>>> Please do not send me e-mail containing HTML code.
>>>>
>>>
>>>
>>
>>
>>
>> --
>> Harbhag Singh Sohal
>> Department of Information Technology
>> Guru Nanak Dev Engineering College, Ludhiana
>>
>> Webpage : http://harbhag.wordpress.com
>> Twitter : http://twitter.com/harbhag
>>
>
>
>
> --
> Harbhag Singh Sohal
> Department of Information Technology
> Guru Nanak Dev Engineering College, Ludhiana
>
> Webpage : http://harbhag.wordpress.com
> Twitter : http://twitter.com/harbhag
>
--
Harbhag Singh Sohal
Department of Information Technology
Guru Nanak Dev Engineering College, Ludhiana
Webpage : http://harbhag.wordpress.com
Twitter : http://twitter.com/harbhag
