Well spotted Maxim. When I did a test I didn’t realize when doing so the 2 user accounts I was testing both had moderator permissions. Silly me.
I’m sure @kaffeesurrogat will be happy to hear that it was not only him. All the best. Sent from my iPhone > On Aug 26, 2020, at 8:07 PM, Maxim Solodovnik <solomax...@gmail.com> wrote: > > Hello, > > "Owner ID" is not relevant, ignore it > It seems I was able to reproduce this issue, and investigating right now > >> On Thu, 27 Aug 2020 at 00:49, kaffeesurrogat <kaffeesurro...@posteo.de> >> wrote: >> >> >> On 26/08/2020 18:46, Denis Noctor wrote: >> > If you take a look at this... >> > https://openmeetings.apache.org/ >> > >> > Near the bottom of the page you will notice one of the changes / >> > improvements... “Direct link for entering the room with room name (not >> > ID)” >> > >> > As a result... maybe... there are some field changes (additions) to >> > the database. >> >> you might be right ;-) >> >> > >> > You previously mentioned: 2 rooms, 2 different servers, 2 different >> > versions of OM. I would keep everything the same... same version of OM. >> >> sorry, that was some kind of missunderstanding. all my testing were done >> with one server OM 5.0.0 (new release) on it >> >> >> > >> > I’ve tried to reproduce this on my set up... using one server, 2 users >> > logged into the same room (one using updated version of Chrome and the >> > other using updated Firefox), one install of OM on server and >> > everything works fine. >> >> >> >> >> >> > Sent from my iPhone >> > >> > On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurro...@posteo.de >> > <mailto:kaffeesurro...@posteo.de>> wrote: >> > >> >> >> >> >> >> On 26/08/2020 18:16, Denis Noctor wrote: >> >>> So let me get try to get my head around this... because I didn’t >> >>> notice you mention this before... >> >> that's right .... i just noticed it a few minutes ago ..... >> >> >> >> >> >>> Are you trying to set up a “clustering environment”.... using 2 >> >>> different versions of OM? >> >> >> >> no ... i have one machine to make changes and updates one for daily use >> >> no clustering at all ;-) >> >> >> >> >> >> >> >>> Sent from my iPhone >> >> >> >>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat >> >>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote: >> >>>> >> >>>> Me again, >> >>>> >> >>>> i made comparison between the my conference rooms. >> >>>> >> >>>> First conference room runs on server 1, older version of >> >>>> openmeetings ... >> >>>> Second conference room runs on server 2, new release of openmeetings >> >>>> with several mic problem .... >> >>>> >> >>>> the room on server 2 does not have an Owner ID .... mmmmmm ..... >> >>>> >> >>>> >> >>>> >> >>>> >> >>>>> On 26/08/2020 17:46, kaffeesurrogat wrote: >> >>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so >> >>>>> many ;-) >> >>>>> >> >>>>> i checked, if this is reproducible. I've made a note of every >> >>>>> single step: >> >>>>> >> >>>>> >> >>>>> 1) login user 1 (moderator) >> >>>>> 2) user 1 entering private room >> >>>>> 3) user 1 turns camera and mic on >> >>>>> 4) login user 2 (not a moderator) >> >>>>> 5) user 2 is entering private room >> >>>>> 6) user 2 requests permissions to use camera and mic >> >>>>> 7) user 1 grants permissions to use camera and mic via activities and >> >>>>> actions >> >>>>> 8) user 2 turns on camera and mic >> >>>>> user 1 and user 2 see/hear each other >> >>>>> 9) user 1 leaves the room >> >>>>> user 2 sees "wait for moderator..." message >> >>>>> 10) user 1 re-enters the room >> >>>>> wait for moderator dissapears >> >>>>> user 1/user 2 cameras/mics off >> >>>>> 11) user 1 turns cam/mic back on >> >>>>> => user 2 sees user 1 >> >>>>> 12) user 2 turns cam/mic back on >> >>>>> => user 1 does not see user 2 (question mark face ...) >> >>>>> => several mic symbols displayed on user 2 - browser for user >> >>>>> 2..... >> >>>>> >> >>>>> see attached pic .... >> >>>>> >> >>>>> user1 >> >>>>> >> >>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine >> >>>>> >> >>>>> user 2 >> >>>>> >> >>>>> Firefox 79 (64 Bit) >> >>>>> Windows 10 >> >>>>> >> >>>>> user 1 and user 2 both on the same network different machines >> >>>>> >> >>>>> server >> >>>>> >> >>>>> ubuntu 18.04 LTS >> >>>>> >> >>>>> openmeetings ... >> >>>>> >> >>>>> Version >> >>>>> 5.0.0 >> >>>>> Revision >> >>>>> 422e22f >> >>>>> Build date >> >>>>> 2020-08-18T00:21:52Z >> >>>>> >> >>>>> Many thanks again, >> >>>>> >> >>>>> kaffeesurrogat >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>>> On 26/08/2020 08:50, Denis Noctor wrote: >> >>>>>> @kaffeesurrogat, >> >>>>>> >> >>>>>> First of all can you confirm that you can see and hear at least 2 >> >>>>>> users in a room as it is a little unclear... and if you’ve read >> >>>>>> my previous email. >> >>>>> yes there are two users in the room. the can hear an see each >> >>>>> other .... >> >>>>> >> >>>>>> I won’t be able to respond immediately as I am on the the other >> >>>>>> side of the planet and am heading off to bed... (1.38am)... but I >> >>>>>> am curious to see if you have been able to reproduce this >> >>>>>> scenario more than once... as it is not very clear from your posts. >> >>>>> yes ..... >> >>>>> >> >>>>>> The situation you described might be exceptionally rare... as I >> >>>>>> can’t see the reason for a moderator to leave a room when others >> >>>>>> are in it... and as a result this scenario might be an >> >>>>>> oversight... but a very small one... taking meeting protocol into >> >>>>>> consideration. But I’ve recommended an alternative. >> >>>>>> >> >>>>>> Hope this helps somewhat. >> >>>>>> >> >>>>>> Again, it is important to stress that it would be useful to >> >>>>>> identify server specs, browser versions and so on. >> >>>>>> >> >>>>>> All the best, Denis. >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> Sent from my iPhone >> >>>>>> >> >>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat >> >>>>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote: >> >>>>>>> >> >>>>>>> Dear Maxim, dear Alvaro, dear .... >> >>>>>>> >> >>>>>>> i did use a linux machine and a windows machine to test my setup >> >>>>>>> ..... >> >>>>>>> I'm quite shure that I made a config mistake, but which one ? >> >>>>>>> >> >>>>>>> Many thanks for your testing and trying, >> >>>>>>> >> >>>>>>> kaffeesurrogat .... >> >>>>>>> >> >>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote: >> >>>>>>>> Hi, >> >>>>>>>> >> >>>>>>>> Are you using two different systems for two logins or just one >> >>>>>>>> system >> >>>>>>>> with two browser >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik >> >>>>>>>> <solomax...@gmail.com <mailto:solomax...@gmail.com> >> >>>>>>>> <mailto:solomax...@gmail.com>> wrote: >> >>>>>>>> >> >>>>>>>> I'll try to test your steps >> >>>>>>>> will take some time .... >> >>>>>>>> >> >>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat >> >>>>>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de> >> >>>>>>>> <mailto:kaffeesurro...@posteo.de>> wrote: >> >>>>>>>> >> >>>>>>>> Dear List, >> >>>>>>>> >> >>>>>>>> many thanks for your new release. I feel ashamed, that I have >> >>>>>>>> to ask >> >>>>>>>> again and again on this list. >> >>>>>>>> >> >>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've >> >>>>>>>> followed the >> >>>>>>>> guides from the wiki. >> >>>>>>>> >> >>>>>>>> I can open up my camera and mic. The following is happening: >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> 1) moderator enters the rom while nobody is there (chrome). >> >>>>>>>> 2) second user enters the room. Both enable there camera and >> >>>>>>>> mic. fine >> >>>>>>>> :-) (firefox) >> >>>>>>>> 3) The moderator leaves the room and the second users sees a >> >>>>>>>> message to >> >>>>>>>> be patient until the moderator enters the room again. >> >>>>>>>> 4) moderators reenters the room, both cameras are turned off >> >>>>>>>> 5) second users turns on his camera .... >> >>>>>>>> >> >>>>>>>> quite a few error messages show up, the camera window is >> >>>>>>>> blue and >> >>>>>>>> blank on the second users screen, on the moderator screens i >> >>>>>>>> can see only the questionmarkman ... >> >>>>>>>> >> >>>>>>>> I've attached all of my config files and some screenshots as >> >>>>>>>> png ... >> >>>>>>>> >> >>>>>>>> I did check the coturn server with trickle ... also attached >> >>>>>>>> >> >>>>>>>> I did attache a screen shot of the moderator account, >> >>>>>>>> several mic >> >>>>>>>> symbols on the screen >> >>>>>>>> >> >>>>>>>> The invalidStateError appears on the second users screen >> >>>>>>>> >> >>>>>>>> The RtcPeerConnection on the moderator screen ..... >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> I'm lost .... already double checked my config files and >> >>>>>>>> reread the >> >>>>>>>> installation manuals .... >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Many thanks, >> >>>>>>>> >> >>>>>>>> kaffeesurogat >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> -- >> >>>>>>>> Best regards, >> >>>>>>>> Maxim >> >>>>>>>> >> >> >> > > > -- > Best regards, > Maxim
