On Wed, 9 Sep 2020 at 16:42, kaffeesurrogat <kaffeesurro...@posteo.de> wrote:
> Dear Maxim, > > On 08/09/2020 17:02, Maxim Solodovnik wrote: > > Am I right thinking everything works as expected? > > The only issue is annoying red popups? > > right this is working .... many thanks for the fix ... is there a way to > surpress all those messages ? > working on it please be more patient .... ;) > > If the room is not set to "wait if the moderator is not there" i have > almost none of the red popups .... ;-) > > > > According TURN > > > > This version can't affect your TURN server :) > > > > AFAIK > > you don't need to provide `user` > > Only `static-auth-secret` > > > > I have > > ``` > > fingerprint > > lt-cred-mech > > use-auth-secret > > static-auth-secret=bla-bla-bla > > realm=om.alteametasoft.com <http://om.alteametasoft.com> > > stale-nonce=0 > > proc-user=nobody > > proc-group=nogroup > > ``` > > i changed my config, it is still working ;-) > > > many thanks, > > kaffeesurrogat > > > > > some of above options might conflict but so far they works on demo > > > > > > On Tue, 8 Sep 2020 at 21:11, kaffeesurrogat <kaffeesurro...@posteo.de > > <mailto:kaffeesurro...@posteo.de>> wrote: > > > > Dear Denis, dear Maxim, dear Alvaro > > > > @maxim: many thanks for the fix .... > > > > I did install the new snapshot: > > > > OpenMeetings > > 5.0.1-SNAPSHOT > > 5e724bf > > 2020-09-07T16:30:21Z > > > > The setup is still the same: > > > > user1 > > > > chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine > > > > user 2 > > > > Firefox 79 (64 Bit) > > Windows 10 > > > > user 1 and user 2 both on the same network different machines > > > > server > > > > ubuntu 18.04 LTS > > > > > > I followed the same way of clicking, entering the room, ... as > > before the fix: > > > > > > 1) login user 1 (moderator) > > 2) user 1 entering private room > > 3) user 1 turns camera and mic on > > 4) login user 2 (not a moderator) > > 5) user 2 is entering private room > > 6) user 2 requests permissions to use camera and mic > > 7) user 1 grants permissions to use camera and mic via activities and > > actions > > 8) user 2 turns on camera and mic > > user 1 and user 2 see/hear each other > > 9) user 1 leaves the room > > user 2 sees "wait for moderator..." message > > 10) user 1 re-enters the room > > wait for moderator dissapears > > user 1/user 2 cameras/mics off > > 11) user 1 turns cam/mic back on > > => user 2 sees user 1 > > > > 12) user 2 turns cam/mic back on > > => user 1 does not see user 2 (question mark face ...) > > => several mic symbols displayed on user 2 - browser for user > > 2.... > > > > STEP 12 DID CHANGE: > > > > I've got new error messages for user 2, see attached files, > > but both users can see and hear each other. > > THE MIC SYMBOL IS SHOWING UP ONLY ONCE > > > > > > I did some more testing: > > > > > > 1) login user 1 (moderator) > > 2) user 1 entering private room > > 3) user 1 turns camera and mic on > > 4) login user 2 (not a moderator) > > 5) user 2 is entering private room > > 6) user 2 requests permissions to use camera and mic > > 7) user 1 grants permissions to use camera and mic via activities and > > actions > > 8) user 2 turns on camera and mic > > user 1 and user 2 see/hear each other > > 9) user 1 DOES NOT leave the room > > user 2 turns camera and mic several times on and off > > > > The error message from step 12 picture_01 does appear very seldom > > The error message from step 12 picture_02 does not appear at all. > > The error message from step 12 picture_03 does not appear at all. > > > > > > Hope this helps a bit .... > > > > > > What I noticed during setup of the new snapshot, that i had some > > troubles with the coturn server. > > > > After following the Alvaro-Instructions SSL .... , i was testing > > my coturn server using > > > > turnutils_uclient -v -u nobody -w a_new_password my.server.org > > <http://my.server.org> > > > > turnutils_uclient failed with "cannot complete Allocation" > > > > turnserver.log says > > > > 2375: check_stun_auth: Cannot find credentials of user <nobody> > > > > I've reread /etc/turnserver.conf: > > > > > > # 'Static' user accounts for long term credentials mechanism, only. > > # This option cannot be used with TURN REST API > > # This option require a realm. > > # 'Static' user accounts are NOT dynamically checked by the > > turnserver process, > > # so that they can NOT be changed while the turnserver is running. > > # > > #user=username1:key1 > > #user=username2:key2 > > # OR: > > user=nobody:a_new_password > > > > > > Since it says that this option cannot be used with TURN REST API > > i've disabled > > the lines > > > > #use-auth-secret > > > > #static-auth-secret=c852f177eb61782daad0103a6141477dd90bf2714db1984daba09316dcd53a44 > > > > Now > > > > turnutils_uclient -v -u nobody -w a_new_password my.server.og > > > > leaves > > > > session 002000000000000001: new, realm=<my.server.org > > <http://my.server.org>>, username=<nobody>, lifetime=777 > > 3: session 002000000000000001: realm <my.server.org > > <http://my.server.org>> user <nobody>: incoming packet ALLOCATE > > processed, success > > 3: session 002000000000000001: refreshed, realm=<my.server.org > > <http://my.server.org>>, username=<nobody>, lifetime=777 > > 3: session 002000000000000001: realm <my.server.org > > <http://my.server.org>> user <nobody>: incoming packet REFRESH > > processed, success > > 3: handle_udp_packet: New UDP endpoint: local addr > > MYIPCOTURNHOST:3478, remote addr MYIPCOTURNCLIENT:39612 > > > > in the turnserver log .... > > > > > > and turnutils_uclient talks about a lot of packages send to my > > coturn server, but openmeetings is not running at all with these > > settings :-) > > > > I guess i did not understand, how this > > cuturn,kurento-media-server,openmeetings combination is working ;-( > > > > > > Again many thanks, sorry for making such a long post .... > > > > > > kaffeesurrogat > > > > > > > > > > > > > > > > -- > > Best regards, > > Maxim > > > -- Best regards, Maxim
