On 26/08/2020 18:46, Denis Noctor wrote:
> If you take a look at this...
> https://openmeetings.apache.org/
>
> Near the bottom of the page you will notice one of the changes /
> improvements... “Direct link for entering the room with room name (not
> ID)”
>
> As a result... maybe... there are some field changes (additions) to
> the database.
you might be right ;-)
>
> You previously mentioned: 2 rooms, 2 different servers, 2 different
> versions of OM. I would keep everything the same... same version of OM.
sorry, that was some kind of missunderstanding. all my testing were done
with one server OM 5.0.0 (new release) on it
>
> I’ve tried to reproduce this on my set up... using one server, 2 users
> logged into the same room (one using updated version of Chrome and the
> other using updated Firefox), one install of OM on server and
> everything works fine.
> Sent from my iPhone
>
> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurro...@posteo.de
> <mailto:kaffeesurro...@posteo.de>> wrote:
>
>>
>>
>> On 26/08/2020 18:16, Denis Noctor wrote:
>>> So let me get try to get my head around this... because I didn’t
>>> notice you mention this before...
>> that's right .... i just noticed it a few minutes ago .....
>>
>>
>>> Are you trying to set up a “clustering environment”.... using 2
>>> different versions of OM?
>>
>> no ... i have one machine to make changes and updates one for daily use
>> no clustering at all ;-)
>>
>>
>>
>>> Sent from my iPhone
>>
>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote:
>>>>
>>>> Me again,
>>>>
>>>> i made comparison between the my conference rooms.
>>>>
>>>> First conference room runs on server 1, older version of
>>>> openmeetings ...
>>>> Second conference room runs on server 2, new release of openmeetings
>>>> with several mic problem ....
>>>>
>>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>>>
>>>>
>>>>
>>>>
>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
>>>>> many ;-)
>>>>>
>>>>> i checked, if this is reproducible. I've made a note of every
>>>>> single step:
>>>>>
>>>>>
>>>>> 1) login user 1 (moderator)
>>>>> 2) user 1 entering private room
>>>>> 3) user 1 turns camera and mic on
>>>>> 4) login user 2 (not a moderator)
>>>>> 5) user 2 is entering private room
>>>>> 6) user 2 requests permissions to use camera and mic
>>>>> 7) user 1 grants permissions to use camera and mic via activities and
>>>>> actions
>>>>> 8) user 2 turns on camera and mic
>>>>> user 1 and user 2 see/hear each other
>>>>> 9) user 1 leaves the room
>>>>> user 2 sees "wait for moderator..." message
>>>>> 10) user 1 re-enters the room
>>>>> wait for moderator dissapears
>>>>> user 1/user 2 cameras/mics off
>>>>> 11) user 1 turns cam/mic back on
>>>>> => user 2 sees user 1
>>>>> 12) user 2 turns cam/mic back on
>>>>> => user 1 does not see user 2 (question mark face ...)
>>>>> => several mic symbols displayed on user 2 - browser for user
>>>>> 2.....
>>>>>
>>>>> see attached pic ....
>>>>>
>>>>> user1
>>>>>
>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>>>
>>>>> user 2
>>>>>
>>>>> Firefox 79 (64 Bit)
>>>>> Windows 10
>>>>>
>>>>> user 1 and user 2 both on the same network different machines
>>>>>
>>>>> server
>>>>>
>>>>> ubuntu 18.04 LTS
>>>>>
>>>>> openmeetings ...
>>>>>
>>>>> Version
>>>>> 5.0.0
>>>>> Revision
>>>>> 422e22f
>>>>> Build date
>>>>> 2020-08-18T00:21:52Z
>>>>>
>>>>> Many thanks again,
>>>>>
>>>>> kaffeesurrogat
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>>>> @kaffeesurrogat,
>>>>>>
>>>>>> First of all can you confirm that you can see and hear at least 2
>>>>>> users in a room as it is a little unclear... and if you’ve read
>>>>>> my previous email.
>>>>> yes there are two users in the room. the can hear an see each
>>>>> other ....
>>>>>
>>>>>> I won’t be able to respond immediately as I am on the the other
>>>>>> side of the planet and am heading off to bed... (1.38am)... but I
>>>>>> am curious to see if you have been able to reproduce this
>>>>>> scenario more than once... as it is not very clear from your posts.
>>>>> yes .....
>>>>>
>>>>>> The situation you described might be exceptionally rare... as I
>>>>>> can’t see the reason for a moderator to leave a room when others
>>>>>> are in it... and as a result this scenario might be an
>>>>>> oversight... but a very small one... taking meeting protocol into
>>>>>> consideration. But I’ve recommended an alternative.
>>>>>>
>>>>>> Hope this helps somewhat.
>>>>>>
>>>>>> Again, it is important to stress that it would be useful to
>>>>>> identify server specs, browser versions and so on.
>>>>>>
>>>>>> All the best, Denis.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
>>>>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote:
>>>>>>>
>>>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>>>
>>>>>>> i did use a linux machine and a windows machine to test my setup
>>>>>>> .....
>>>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>>>
>>>>>>> Many thanks for your testing and trying,
>>>>>>>
>>>>>>> kaffeesurrogat ....
>>>>>>>
>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> Are you using two different systems for two logins or just one
>>>>>>>> system
>>>>>>>> with two browser
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
>>>>>>>> <solomax...@gmail.com <mailto:solomax...@gmail.com>
>>>>>>>> <mailto:solomax...@gmail.com>> wrote:
>>>>>>>>
>>>>>>>> I'll try to test your steps
>>>>>>>> will take some time ....
>>>>>>>>
>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>
>>>>>>>> <mailto:kaffeesurro...@posteo.de>> wrote:
>>>>>>>>
>>>>>>>> Dear List,
>>>>>>>>
>>>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>>>> to ask
>>>>>>>> again and again on this list.
>>>>>>>>
>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>>>> followed the
>>>>>>>> guides from the wiki.
>>>>>>>>
>>>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>>>
>>>>>>>>
>>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>>>> mic. fine
>>>>>>>> :-) (firefox)
>>>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>>>> message to
>>>>>>>> be patient until the moderator enters the room again.
>>>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>>>> 5) second users turns on his camera ....
>>>>>>>>
>>>>>>>> quite a few error messages show up, the camera window is
>>>>>>>> blue and
>>>>>>>> blank on the second users screen, on the moderator screens i
>>>>>>>> can see only the questionmarkman ...
>>>>>>>>
>>>>>>>> I've attached all of my config files and some screenshots as
>>>>>>>> png ...
>>>>>>>>
>>>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>>>
>>>>>>>> I did attache a screen shot of the moderator account,
>>>>>>>> several mic
>>>>>>>> symbols on the screen
>>>>>>>>
>>>>>>>> The invalidStateError appears on the second users screen
>>>>>>>>
>>>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>>>
>>>>>>>>
>>>>>>>> I'm lost .... already double checked my config files and
>>>>>>>> reread the
>>>>>>>> installation manuals ....
>>>>>>>>
>>>>>>>>
>>>>>>>> Many thanks,
>>>>>>>>
>>>>>>>> kaffeesurogat
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Best regards,
>>>>>>>> Maxim
>>>>>>>>
>>
