On 26/08/2020 18:16, Denis Noctor wrote:
> So let me get try to get my head around this... because I didn’t notice you
> mention this before...
that's right .... i just noticed it a few minutes ago .....
> Are you trying to set up a “clustering environment”.... using 2 different
> versions of OM?
no ... i have one machine to make changes and updates one for daily use
no clustering at all ;-)
> Sent from my iPhone
>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat <kaffeesurro...@posteo.de>
>> wrote:
>>
>> Me again,
>>
>> i made comparison between the my conference rooms.
>>
>> First conference room runs on server 1, older version of openmeetings ...
>> Second conference room runs on server 2, new release of openmeetings
>> with several mic problem ....
>>
>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>
>>
>>
>>
>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-)
>>>
>>> i checked, if this is reproducible. I've made a note of every single step:
>>>
>>>
>>> 1) login user 1 (moderator)
>>> 2) user 1 entering private room
>>> 3) user 1 turns camera and mic on
>>> 4) login user 2 (not a moderator)
>>> 5) user 2 is entering private room
>>> 6) user 2 requests permissions to use camera and mic
>>> 7) user 1 grants permissions to use camera and mic via activities and
>>> actions
>>> 8) user 2 turns on camera and mic
>>> user 1 and user 2 see/hear each other
>>> 9) user 1 leaves the room
>>> user 2 sees "wait for moderator..." message
>>> 10) user 1 re-enters the room
>>> wait for moderator dissapears
>>> user 1/user 2 cameras/mics off
>>> 11) user 1 turns cam/mic back on
>>> => user 2 sees user 1
>>> 12) user 2 turns cam/mic back on
>>> => user 1 does not see user 2 (question mark face ...)
>>> => several mic symbols displayed on user 2 - browser for user 2.....
>>>
>>> see attached pic ....
>>>
>>> user1
>>>
>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>
>>> user 2
>>>
>>> Firefox 79 (64 Bit)
>>> Windows 10
>>>
>>> user 1 and user 2 both on the same network different machines
>>>
>>> server
>>>
>>> ubuntu 18.04 LTS
>>>
>>> openmeetings ...
>>>
>>> Version
>>> 5.0.0
>>> Revision
>>> 422e22f
>>> Build date
>>> 2020-08-18T00:21:52Z
>>>
>>> Many thanks again,
>>>
>>> kaffeesurrogat
>>>
>>>
>>>
>>>
>>>
>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>> @kaffeesurrogat,
>>>>
>>>> First of all can you confirm that you can see and hear at least 2 users in
>>>> a room as it is a little unclear... and if you’ve read my previous email.
>>> yes there are two users in the room. the can hear an see each other ....
>>>
>>>> I won’t be able to respond immediately as I am on the the other side of
>>>> the planet and am heading off to bed... (1.38am)... but I am curious to
>>>> see if you have been able to reproduce this scenario more than once... as
>>>> it is not very clear from your posts.
>>> yes .....
>>>
>>>> The situation you described might be exceptionally rare... as I can’t see
>>>> the reason for a moderator to leave a room when others are in it... and as
>>>> a result this scenario might be an oversight... but a very small one...
>>>> taking meeting protocol into consideration. But I’ve recommended an
>>>> alternative.
>>>>
>>>> Hope this helps somewhat.
>>>>
>>>> Again, it is important to stress that it would be useful to identify
>>>> server specs, browser versions and so on.
>>>>
>>>> All the best, Denis.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <kaffeesurro...@posteo.de>
>>>>> wrote:
>>>>>
>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>
>>>>> i did use a linux machine and a windows machine to test my setup .....
>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>
>>>>> Many thanks for your testing and trying,
>>>>>
>>>>> kaffeesurrogat ....
>>>>>
>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>> Hi,
>>>>>>
>>>>>> Are you using two different systems for two logins or just one system
>>>>>> with two browser
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax...@gmail.com
>>>>>> <mailto:solomax...@gmail.com>> wrote:
>>>>>>
>>>>>> I'll try to test your steps
>>>>>> will take some time ....
>>>>>>
>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote:
>>>>>>
>>>>>> Dear List,
>>>>>>
>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>> to ask
>>>>>> again and again on this list.
>>>>>>
>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>> followed the
>>>>>> guides from the wiki.
>>>>>>
>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>
>>>>>>
>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>> mic. fine
>>>>>> :-) (firefox)
>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>> message to
>>>>>> be patient until the moderator enters the room again.
>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>> 5) second users turns on his camera ....
>>>>>>
>>>>>> quite a few error messages show up, the camera window is
>>>>>> blue and
>>>>>> blank on the second users screen, on the moderator screens i
>>>>>> can see only the questionmarkman ...
>>>>>>
>>>>>> I've attached all of my config files and some screenshots as
>>>>>> png ...
>>>>>>
>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>
>>>>>> I did attache a screen shot of the moderator account, several mic
>>>>>> symbols on the screen
>>>>>>
>>>>>> The invalidStateError appears on the second users screen
>>>>>>
>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>
>>>>>>
>>>>>> I'm lost .... already double checked my config files and
>>>>>> reread the
>>>>>> installation manuals ....
>>>>>>
>>>>>>
>>>>>> Many thanks,
>>>>>>
>>>>>> kaffeesurogat
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Best regards,
>>>>>> Maxim
>>>>>>
