On 26/08/2020 08:24, Denis Noctor wrote:
> @kaffeesurogat
>
> Hi there Kaffeesurogat,
>
> Generally speaking what you posted seems fine. As @Alvaro has stated also.
;-)
> I wrote to you regarding in-company restrictions before and from what I
> gather, the previous problems you had were fixed, is that right?
dear dennis,
yes that's right .... at least i believe so .... i want to make shure,
not to publish anything wrong. So I took a lot of notes, cleared my test
server, upgraded to the new release following all of the
wiki-instructions of Alvaro and got stuck with the new problem ....
thus i will have to wait until i will post about the
"workspace-problem-solution" .... but basically i changed the port to
the more known port 443 and coturn to use tcp ... i will write about it
as soon as i can, someone should double check it, cause i'm not an
expert and my assumptions
, modifcations and most important my clues might be wrong .....
>
> If a room is set up whereby “wait for a moderator” is configured... that is
> all well and good... but but not necessarily decorum to leave the room
> leaving participants to be automatically disconnected.
>
> I had a situation whereby I needed to exit a room and told my students to
> work on an exercise and I would be back shortly. My phone was flooded with
> texts saying they were unable to see anything until I returned. I changed the
> room configuration whereby anyone could enter the room before me... but they
> had to refresh the browser... alternatively delegate another moderator. Yep,
> there were a stream of errors until they did so.
>
> What I’d like to know is has everything been sorted out since my last email.
have a look above ....
> If yes, I would recommend that rather than a moderator leave a room when
> other people are in it, simply inform users that you are disappearing for a
> moment and turn off the cam and mic. If needed, give the other users
> “presenter privileges” in your absence.
>
that would be a good workaround .... ;-)
> The error that you described revolves around the Kurento Media Server issues
> that you previously described. Can you confirm you are able to get a 2 user
> setting whereby both users are able to see and hear each other in the “work”
> scenario you previously described?
no, i've tested this at home and i've followed the steps from
Alvaro-Manuals strictly (at least i hope so).... after that i did want
to do the modifications I described in short above, but i stopped, cause
of the problems i had beforehand with the mics after the moderator
leaves the room ...... First i want to make it work from home, after
that i will takle the workplace problem again .... thought this is a
reasonable way of doing it ....
>
> All the best. Denis.
Many thanks, Denis
>
> Sent from my iPhone
>
>> On Aug 24, 2020, at 1:38 PM, kaffeesurrogat <kaffeesurro...@posteo.de> wrote:
>>
>> Dear List,
>>
>> many thanks for your new release. I feel ashamed, that I have to ask
>> again and again on this list.
>>
>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've followed the
>> guides from the wiki.
>>
>> I can open up my camera and mic. The following is happening:
>>
>>
>> 1) moderator enters the rom while nobody is there (chrome).
>> 2) second user enters the room. Both enable there camera and mic. fine
>> :-) (firefox)
>> 3) The moderator leaves the room and the second users sees a message to
>> be patient until the moderator enters the room again.
>> 4) moderators reenters the room, both cameras are turned off
>> 5) second users turns on his camera ....
>>
>> quite a few error messages show up, the camera window is blue and
>> blank on the second users screen, on the moderator screens i
>> can see only the questionmarkman ...
>>
>> I've attached all of my config files and some screenshots as png ...
>>
>> I did check the coturn server with trickle ... also attached
>>
>> I did attache a screen shot of the moderator account, several mic
>> symbols on the screen
>>
>> The invalidStateError appears on the second users screen
>>
>> The RtcPeerConnection on the moderator screen .....
>>
>>
>> I'm lost .... already double checked my config files and reread the
>> installation manuals ....
>>
>>
>> Many thanks,
>>
>> kaffeesurogat
>> <conf_2020_25_08.tar.gz>
