Someone else suggested this
" i think that motherboard chipset is too new for your operating system. i have
the same issue with an amd 690g mobo and find that only mint and sabayon run
properly. "
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Thu, 30 Aug 2007 12:40:21
+0000Subject: Re: [ubuntu-uk] Fiesty wont work!!!!
unfortunately this seems a bit complicated and beyond my level of expertise! I
will try and take some pics and email them for you to see! Could it something
to do with the nvidia drivers?i tried clicking on enable desktop effects but
screen just blankd out!
> Date: Thu, 30 Aug 2007 12:39:50 +0100> From: [EMAIL PROTECTED]> To:
> ubuntu-uk@lists.ubuntu.com> Subject: Re: [ubuntu-uk] Fiesty wont work!!!!> >
> Hi> > STONE COLD wrote:> > anyway how would it put this message on to USB
> drive?> > When you insert the USB stick/drive it should be detected
> correctly, but> it won't automount. Log in to one of the consoles and become
> root with> "sudo -i"> A few seconds after you connect it, run "fdisk -l"> >
> These should lead you to the name of the partition on the drive (most> likely
> it will be sda1 or sdb1).> > You can then mount this with "mkdir /mnt/tmp ;
> mount /dev/AS_ABOVE /mnt/tmp"> > You can then copy the log file with "cp
> /var/log/Xorg.0.log /mnt/tmp"> > and finally unmount the drive with "umount
> /mnt/tmp"> > Then put the usb drive into a working computer and mail the
> output. It's> probably a good idea to send it directly to me rather than post
> the> whole log to the list. I will reply to the thread with the appropriate>
> errors from the log.> > Cheers,> -- > Chris Jones> [EMAIL PROTECTED]>
> www.canonical.com> > -- > ubuntu-uk@lists.ubuntu.com>
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk>
> https://wiki.kubuntu.org/UKTeam/
--
ubuntu-uk@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk
https://wiki.kubuntu.org/UKTeam/
