Hello Albert, hello Andreas, any news if this two patches can get accepted?
Cheers, Markus On Thu, Aug 16, 2012 at 8:22 PM, Markus Hubig <mhu...@imko.de> wrote: > In order to use the serial interface on the PortuxG20 we need to enable the > level converter first by setting the PC9 pin to high. The level converter > needs > some time to settle so we have to use the mdelay() function to wait for some > time. Unfortunately we have no timers available at board_early_init_f() so we > enable the serial output early within board_postclk_init(). > > Unfortunately the board_postclk_init() function was not called in the > init_sequence of arch/arm/lib/board.c so the first patch will added it there. > > --- > Markus Hubig (2): > arm: Adds board_postclk_init to the init_sequence. > Fixes the crippled console output on PortuxG20. > > arch/arm/lib/board.c | 3 +++ > board/taskit/stamp9g20/stamp9g20.c | 21 +++++++++++++++++---- > include/configs/stamp9g20.h | 1 + > 3 files changed, 21 insertions(+), 4 deletions(-) > > -- > 1.7.7 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
