On 05/30/2012 12:02 AM, Manukumar wrote: > hello, > I was able to solve nand erase and nand write and saveenv. > Now,I am making kernel up and followed below steps.. > > 1) tf 1000000 uImage_icm_v1.1 > nand erase 0x00200000 361483 > nand write 1000000 0x00200000 361483 > > 2) tf c00000 p1021rdb_32b.dtb > nand erase 0x00100000 3000 > nand write c00000 0x00100000 3000 > > 3) tf 2000000 mini.rootfs.ext2.gz.uboot > nand erase 0x00600000 2115d4 > nand write 2000000 0x00600000 2115d4 > > then to boot kernel from nand i used > bootm 0x00200000 0x00600000 0x00100000
Bootm takes a RAM address, not a NAND address. Unlike NOR flash, NAND is not directly addressable. You need to use "nand read" first. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
