Hello scott, The issue is solved by making baud rate correction. thank you
manukumar signal-networks On Fri, 2012-06-01 at 12:15 -0500, Scott Wood wrote: > On 06/01/2012 05:10 AM, Manukumar wrote: > > Hello scott. > > > > I can able make the kernel up but it hangs after probing > > serial driver as shown below: > > > > It has to boot further but its not happenig.. > > I have attached the file i should get the log as this i also mentioned > > where it hangs... > > > > what may be the problem with this how could i fix this issue. > > This is getting off topic for the U-Boot list. Plus, it looks like > you're using a Freescale-provided kernel. Please e-mail > supp...@freescale.com, or try the latest upstream kernel and get help > from linuxppc-...@lists.ozlabs.org. > > But in this case, since this is your custom board, and it works on the > evaluation board, this is something you'll need to debug yourself (or > hire someone to debug). > > Given the place where it hangs, the obvious suggestion is to make sure > the baud rate and serial input clock are correct. > > -Scott > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
